Chemicals & Lubricants
Cleaner / Degreaser..........H2-H7, H12-H15, H45-H46, H75
Pumps.....................................................................H10-H11
Lubricants and Penetrants .....................H18-H20, H26-H41
Cutting and Tapping................................................H16-H24
Corrosion Products ........................................H25-H27, H32
Molding Solutions ...........................................................H42
Paint and Removers...............................................H43-H45
Layout Fluids and Dye....................................................H46
Markers...................................................................H47-H51
Threadlockers.........................................................H52-H54
Chemical Sealants And Gasketing .........................H55-H59
Floor Coatings And Repair .....................................H60-H61
Rebuild And Repair.................................................H62-H67
Adhesives and Epoxy.............................................H68-H73
Specialty .................................................................H74-H75
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-1
D egreasers & P arts C leaners G eneral P urPose
heavy Duty Degreaser
hydroForce ®
non-Flash / leaves no residue
Cleaner / Degreaser
Quickly and effectively removes grease, oil, tar,
industrial strength Formula
adhesives, dirt, grime, corrosion, sludge and other
Aqueous cleaner with the powerful performance of
stubborn substances to increase operating efficiency of
a solvent. Upon contact, HYDROFORCE® Industrial
equipment. Heavy-duty degreaser offers quick and efficient
Strength instantly begins to hunt-down, break-up and
degreasing action and fast evaporation with no residue.
lift-off heavy deposits of grease, oil and dirt. It exhibits
Use caution on plastics. No flash or fire point.
a unique spreadability that cleans up to four times
Non-corrosive and non-staining. High dielectric strength
the surface area of competitive products. Perfect for
of 36,700 volts. Contains no Class I or Class II ozone
facilities seeking an alternative to traditional solvents.
depleting chemicals. High cleaning strength of 129 KB.
Biodegradable, concentrated, non-abrasive,
NSF K2 registered.
non-flammable, safe on most plastics. Low foaming - perfect
for hand-held pressure washers and industrial high pressure parts
siZe
tYPe
Part no
PriCe
washers. Perfect for machinery, motors, concrete and non-porous
1 gal
Bottle
CRC-03096
92.91
surfaces. Use caution on soft metals and painted surfaces.
5 gal
Pail
CRC-03097
343.02
55 gal
Drum
CRC-03098
2628.23
siZe
tYPe
Part no
PriCe
20 oz
Aerosol
CRC-14414
10.14
32 oz
Trigger Bottle
CRC-14415
12.85
5 gal
Pail
CRC-14417
130.46
55 gal
Drum
CRC-14418
894.02
heavy Duty Degreaser ii
non-Chlorinated
An excellent alternative for cleaning applications where
chlorinated solvents are not acceptable. Effectively
hydroForce ® super Citrus ™
removes soils and cleans surfaces without residue
build-up. Use caution on plastics. Non-conductive and
solvent strength Cleaning and Degreasing
non-corrosive. High dielectric strength of 29,000 volts.
Naturally formulated, biodegradable cleaner/degreaser
Low odor compound, unlike citrus-based products.
that offers the superb cleaning power of citrus.
Contains no Class I or Class II ozone depleting chemicals.
HydroForce® Super Citrus™ dissolves grease, oil,
NSF K2 registered for use in meat and poulty plants.
ink, tar, asphalt and many other industrial residues.
Non-flammable, safe on most plastics. Wipes off easily
and leaves no residue. Pleasant citrus scent.
siZe
tYPe
Part no
PriCe
NSF C1 registered for use in meat and poultry plants.
20 oz
Aerosol
CRC-03120
17.39
1 gal
Bottle
CRC-03121
97.04
siZe
tYPe
Part no
PriCe
20 oz
Aerosol
CRC-14440
10.19
hydroForce ® all Purpose
Cleaner / Degreaser
hydroForce ® butyl-Free
Grease busting Formula
all Purpose Cleaner
Butyl-free cleaner that is versatile enough for all of
Versatile enough to use for all cleaning tasks.
your cleaning tasks, but strong enough to attack and
HYDROFORCE ® All Purpose breaks-up and lifts-off
remove tough dirt, dust and grime deposits. Outcleans
grease, oil and dirt deposits. HYDROFORCE ® All
many competing aqueous cleaners containing butyl.
Purpose exhibits a unique spreadability that cleans
Perfect for facilities seeking an efficacious all-purpose
up to three times the surface area as competing
cleaner with maximum regulatory compliance.
aqueous cleaners. Perfect for facilities seeking an
Biodegradable and concentrated. Non-corrosive,
improvement over their current all-purpose aqueous cleaner.
non-abrasive. Non-flammable, safe on most plastics.
For grease busting strength with maximum versatility. Biodegradable
Floor wax safe. Certified as a Clean Air Solvent (CAS)
and concentrated. Non-corrosive, non-abrasive. Non-flammable.
by the South Coast Air Quality Management District (SCAQMD).
Safe on most plastics.
NSF A1, C1 registered for use in meat and poultry plants.
siZe
tYPe
Part no
PriCe
20 oz
Aerosol
CRC-14405
7.49
siZe
tYPe
Part no
PriCe
32 oz
Trigger Bottle
CRC-14401
8.52
32 oz
Trigger Bottle
CRC-14407
10.91
1 gal
Bottle
CRC-14402
17.62
H-2
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
G eneral P urPose D egreasers & P arts C leaners
natural Degreaser ™
biodegradable
Precision Clean multi-Purpose
Naturally formulated, biodegradable cleaner degreaser
Cleaner / Degreaser
that offers the natural cleaning power of citrus. It does
not require water wash-off, and does not leave sticky
Water-based. Biodegradable. Super industrial
residue commonly associated with citrus-based cleaners.
strength. Removes tough, stubborn stains and
Contains no Class I or Class II ozone depleting chemicals
soils such as grease and oil. Nonflammable.
or chlorinated solvents. Unique advanced technology
pH Ready-to-Use = 12.5; concentrate = 13.
blend of natural citrus and organic solvents, non-corrosive
Does not contain chlorinated or petroleum
and effective for use on all metals. High dielectric strength
solvents, bleach, ammonia, abrasives or butyl.
of 36,500 volts. Suitable for use on some plastics.
Rinses clean. Contains a corrosion inhibitor to help
prevent flash rusting. Safe on all surfaces except magnesium.
NSF registered category C1 registration #059854.
siZe
tYPe
Part no
PriCe
20 oz
Aerosol
CRC-14005
15.60
5 gal
Pail
CRC-14007
402.55
siZe
tYPe
Part no
PriCe
55 gal
Drum
CRC-14008
2898.43
28 fl oz
Trigger Bottle
LPS-02728
15.15
1 gal
Concentrate
LPS-02701
47.61
5 gal
Concentrate
LPS-02705
234.15
super Degreaser ™
advanced technology
Non-chlorinated, non-conductive, non-corrosive,
non-staining and with no flash or fire point. Quickly
eVr Clean air solvent
dissolves grease, oil and sludge for more efficient
Degreaser
operation of mechanical equipment. Evaporates rapidly
High solvent strength. Fast
and leaves no residue. It is an optimal alternative to
evaporating. Low VOC content.
1,1,1-Trichloroethane products. Contains no chlorinated
Complies with CARB/OTC
solvents. Low toxicity compared to most chlorinated
(California Air Resources Board/Ozone Transport Commission)
solvents. High dielectric strength of 26,800 volts.
Rules. Not a Hazardous Air Pollutant (HAP). Instant cleaning action.
Contains no Class I or Class II ozone depleting chemicals.
Excellent replacement for Methyl Ethyl Ketone (MEK). NSF Certified
Not labeled for use in California.
C1 Registration #141139(aerosol). Ideal for cleaning metals. No
residue. No ozone depleting compounds. Inverta spray valve.
siZe
tYPe
Part no
PriCe
20 oz
Aerosol
CRC-03110
24.28
20 oz
Non-Aerosol Spray
CRC-03114
30.08
siZe
tYPe
Part no
PriCe
1 gal
Bottle
CRC-03111
195.26
14 oz
Aerosol
LPS-05220
15.51
5 gal
Pail
CRC-03112
960.78
Quick Clean ™ safety solvent and
Degreaser
t-91 non-solvent Degreaser
Contains no solvents. Premium
safety solvent and Degreaser
performance cleaning ability. Green
Effective heavy duty degreaser provides strong degreasing
product: Recognized by U.S. EPA’s
action, fast evaporation and no residue. It is non-flammable,
(Environmental Protection Agency)
VOC exempt, and contains no Class I or Class II ozone
Design for the Environment (DfE)
depleting chemicals. Use caution on plastics and paints.
Requirements. Zero VOCs. VOC’s per
Test on a small area before use. Non-staining,
CARB/OTC/LADCO: 0 g/L. VOC content
non-corrosive and non-conductive. High dielectric
per SCAQMD: 0 g/L. Biodegradable,
strength of 37,500 volts.
non-flammable. Listed in the USDA BioPreferredSM catalog.
Non-toxic, low odor. Proprietary formula. Efficient: requires less
siZe
tYPe
Part no
PriCe
product than traditional solvents to get the job done. Ideal for
5 gal
Pail
CRC-03183
261.68
traditional solvent cleaning, basin style part washers and dip tanks.
55 gal
Drum
CRC-03184
2190.76
Moderate foam for effective mechanical cleaning. Acceptable for
use in Canadian food processing establishments.
Please note:
siZe
tYPe
Part no
PriCe
Chemicals, aerosols, oils,
28 oz
Trigger Bottle
LPS-06328
17.48
grease etc. cannot be
1 gal
Bottle
LPS-06301
51.28
shipped by air. All shipments
5 gal
Pail
LPS-06305
235.80
of these products must deliver
54 gal
Drum
LPS-06355
1742.90
by Ground Service Only.
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-3
D egreasers & P arts C leaners G eneral P urPose
Presolve ®
G-49 orange Degreaser low VoCs
orange Degreaser
Reduced VOCs (Volatile Organic Compounds).
High performance citrus based degreaser. Ideal
Conforms to the VOC regulations of CARB
for removing grease and oil. Fast acting, deep
(California Air Resources Board), OTC (Ozone
penetration. Controlled evaporation. Does not
Transport Commission) and LADCO (Lake Michigan
contain chlorinated solvents. Safe on all metals
Air Directors Consortium). Instant cleaning action,
and most plastics. Inverta Spray Valve allows one
no residue. Excellent for removing grease, grime,
to spray in an upright or inverted position.
oil, and adhesives. High solvent strength. Moderate
NSF registered category C1 registration #129025
evaporation. Excellent alternative to Methyl Ethyl
(Aerosol), #059830 (bulk).
Ketone (MEK). Ideal for cleaning equipment. Not a
Hazardous Air Pollutant (HAP). No ozone depleting
compounds (ODC). NSF® registered category code C1,
registration #142147. Inverta spray valve.
siZe
tYPe
Part no
PriCe
15 oz
Aerosol
LPS-01420
18.01
1 gal
Bottle
LPS-01428
115.90
siZe
tYPe
Part no
PriCe
5 gal
Pail
LPS-01405
513.68
15 oz
Aerosol
LPS-06420
18.39
55 gal
Drum
LPS-01455
5089.73
natural blue ®
Cleaner / Degreaser
Zerotri ® heavy-Duty Degreaser
Removes grease, grime, oil, soot, cutting
Fast evaporating. Instant degreasing action
fluids, mildew, stains, light carbon, animal fat,
instantly removes oil, grease, wax, dirt, moisture,
polishing compounds, and ink. Cleans engine
tar and other contaminants. Nonconductive. Safe
parts, ovens, exhaust hoods, drilling rigs. Can
to use on most surfaces. Ideal for degreasing
be diluted for general wipe down cleaning.
metals. Does not contain chlorinated solvents.
Formulated for pressure spraying and immersion
No residue. Inverta Spray Valve allows one to
cleaning processes, at room temperature or
spray in an upright or inverted position.
heated.
siZe
tYPe
Part no
PriCe
siZe
tYPe
Part no
PriCe
15 oz
Aerosol
LPS-03520
25.46
24 fl oz
Spray Bottle
LCT-82249
13.86
1 gal
Bottle
LPS-03528
155.66
1 gal
Bottle
LCT-82251
33.70
5 gal
Pail
LPS-03505
639.43
oDC-Free Cleaner
Cleaner / Degreaser
sa-X-X-treme Degreaser
Removes grease, oil, lubrication fluids, metal
cuttings and fines from parts, equipment, and
Water-based. High Alkalinity - pH: 12.0 - 13.0.
machinery. Use as a spray or in immersion
Super aggressive formula. Non-flammable.
cleaning processes, at room temperature or
Removes greases, oil, tar, and dirt.
heated. Recommended as a final pre-assembly
Economical: can be diluted with water.
cleaning treatment for all surfaces bonded with
Efficient: requires less product than traditional
adhesives.
water-based cleaners to get the job done.
Rinses clean with no residue. Safe on most
metals. Trigger spray bottle is ready-to-use.
Value performance.
siZe
tYPe
Part no
PriCe
28 oz
Trigger Bottle
LPS-06828
10.33
1 gal
Bottle
LPS-06801
25.25
siZe
tYPe
Part no
PriCe
5 gal
Pail
LPS-06805
114.75
15 oz
Aerosol
LCT-22355
12.31
54 gal
Drum
LPS-06855
918.00
16 fl oz
Pump Spray
LCT-20162
12.31
H-4
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
G eneral P urPose D egreasers & P arts C leaners
non-Chlorinated Parts Cleaner
leaves no residue
Cleaner for removing oil, grease, and asphalt with
Clean F2 ™
no chlorinated solvent run-off. All-purpose metal
non-butyl Floor and multi-purpose
parts cleaner. Ideal for aluminum surfaces.
Cleaner
Strong and super concentrated for use on
floors and hard surfaces. Very economical
to use and safe for human contact at 20%
concentration!
siZe
tYPe
Part no
PriCe
1 gal
Bottle
MAS096-11170
18.14
5 gal
Pail
MAS096-11180
69.96
siZe
tYPe
Part no
PriCe
14-3/4 oz
Aerosol
LCT-30545
6.06
task2 ™ Grime Fighter
super strength industrial Cleaner
Super concentrated, industrial strength
task2 ™ all Purpose Cleaner
cleaner/degreaser. Safe on all metals.
all-purpose Cleaner PmC 1455-11
For removal of heavy, oily, or greasy soils.
\
Spray bottle cleaning of machines.
siZe
tYPe
Part no
PriCe
32 oz
Trigger Bottle
MAS096-13520
7.13
1 gal
Bottle
MAS096-13530
22.38
5 gal
Pail
MAS096-13540
91.02
54 gal
Drum
MAS096-13550
745.20
siZe
tYPe
Part no
PriCe
32 oz
Trigger Bottle
MAS096-13570
6.55
1 gal
Bottle
MAS096-13580
20.54
5 gal
Pail
MAS096-13590
81.92
54 gal
Drum
MAS096-13600
622.08
Whamex ™
Whamex™ is made for cleaning out
machine tool sumps and larger systems,
coolant supply lines and coolant recycling
Clean 2029 “one step”
equipment. Will remove heavy soils from
machines without affecting paints, coatings,
Parts Washing Fluid with Corrosion
seals, hoses or skirting. It will not leave a
inhibitor
slippery residue. Short term corrosion
High detergent, low foam, and good
inhibitors prevent flash rusting on machine
in-process rust prevention. Mild pH for a
surfaces and ways.
safer work environment. Use at 3%–5%
and 120°F–180°F (49°C–82°C) for best
siZe
tYPe
Part no
PriCe
results and lowest foam.
1 gal
Bottle
MAS096-13870
36.88
5 gal
Pail
MAS096-13880
163.52
54 gal
Drum
MAS096-13890
1580.04
siZe
tYPe
Part no
PriCe
1 gal
Bottle
MAS096-10770
27.14
5 gal
Pail
MAS096-10780
114.96
Please note:
54 gal
Drum
MAS096-10790
1020.60
Chemicals, aerosols, oils,
grease etc. cannot be
shipped by air. All shipments
of these products must deliver
by Ground Service Only.
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-5
D egreasers & P arts C leaners G eneral P urPose a utomotive
liqui-sol ™ Degreaser
non-aerosol
Citrus cleaner/degreaser. Non-aerosol, non-chorinated
task2 ™ Glass Cleaner
degreaser. Recommended dilution. VOC content. Flash
Glass Cleaner PmC 1406-41
point 100°F, Dielectric strength 40, 400V, For use on
For cleaning glass and plastic surfaces.
walls, fixtures, locker rooms, concrete floors, schools
NSF C1 registered.
siZe
tYPe
Part no
PriCe
14 oz
Trigger Bottle
SPR-20757LQ
10.26
siZe
tYPe
Part no
PriCe
32 oz
Trigger Bottle
MAS096-13620
6.03
1 gal
Bottle
MAS096-13630
18.72
5 gal
Pail
MAS096-13640
72.78
55 gal
Drum
MAS096-13650
520.56
Citrus Cleaner Degreaser
maintenance Cleaner
Biodegradable, heavy-duty, multi-purpose cleaner and
graffiti remover. Pleasant citrus scent. Removes grimy
dirt, grease and oil.For surfaces such as Formica™,
Fiberglas™, wood, ceramic tile and some plastics. Ideal
for public areas subject to abuse. No CFCs or HCFCs.
brakleen ® brake Parts Cleaner
Dielectric strength: 40,400 volts. Uses: walls and fixtures
in rest-rooms, locker rooms, schools, public buildings,
brake Parts Cleaner
transit system vehicles and buildings; also for cleaning
Quickly removes brake fluid, grease, oil and other
residue on molds, aluminum, concrete floors.
contaminants from brake linings and pads. Helps
brakes last longer and perform more efficiently. Cleans
siZe
tYPe
Part no
PriCe
fast, dries fast and leaves no residue. Degreases
20 oz
Aerosol
SPR-S00757
8.92
instantly. Non-flammable. Works without disassembly.
siZe
tYPe
Part no
PriCe
General Purpose Cleaner
20 oz
Aerosol
CRC-05089
7.27
maintenance Cleaner
1 gal
Bottle
CRC-05090
50.60
5 gal
Pail
CRC-05091
238.74
All-purpose formula that cuts through dirt with ease.
55 gal
Drum
CRC-05093
1964.97
Effective and safe to use on metal, finished wood,
porcelain, vinyl, leather, laminated surfaces and glass.
Cleans spots on synthetic carpets. USDA compliant,
NSF listed. Uses: Office equipment, copy machines,
vehicle interiors, windshields, counters, chalkboards,
fixtures.
siZe
tYPe
Part no
PriCe
u-10 brake Cleaner
20 oz
Aerosol
SPR-S00880
3.78
Low VOC (Volatile Organic Compounds) content.
Conforms to the VOC regulations of CARB (California Air
Resources Board), OTC (Ozone Transport Commission)
and LADCO (Lake Michigan Air Directors Consortium).
Instantly removes brake fluid, dust, grease and oil.
stainless steel Cleaner
Improves brake performance. Helps stop disc brake
squeal. Powerful jet spray and high solvency. Can be
non-aerosol
applied without disassembling the brake unit.
Stainless steel cleaner, non-aerosol, flash point
No ozone depleting chemicals. Fast evaporating.
200° F, NSF C1 Rated.
Does not contain toluene. Does not contain chlorinated
solvents. No rinsing or no residue.
siZe
tYPe
Part no
PriCe
14 oz
Aerosol
LPS-06220
12.88
siZe
tYPe
Part no
PriCe
14 oz
Trigger Bottle
SPR-20880LQ
6.51
H-6
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
a utomotive P arts W ashers D egreasers & P arts C leaners
battery Cleaner
Promotes longer battery life
Parts Washer
Water soluble formula designed to remove corrosion
80 Gallon unit
quickly and economically while neutralizing acid spills.
Heavy-duty stainless steel
Use to restore battery output and reduce voltage
construction. Self-cleaning agitating
leakage due to contaminants. Assures maximum
platform lifts parts. Filter regulator
battery current flow. Promotes longer battery life.
with auto drain. Adjustable agitation
Use CRC Battery Terminal Protector(#03175) for
speed. Flow-through brush with
extended protection.
polyester filaments. Preset thermostat
temperature of 110°F. Includes
siZe
tYPe
Part no
PriCe
non-adjustable backup thermostat.
12 oz
Aerosol
CRC-03176
7.09
6000-watt heater. Electrical plug not included. Pump voltage:
115/60HZ/1PH. Heater: 230V/60HZ/1PH.
siZe
Part no
PriCe
52-1/2 x 34 x 66-1/2"
SIM500-79180
7759.24
empty trigger bottle
bulk bottle
New 24 oz design improves stability while Level III
fluorination provides maximum durability. Features
biomatic ™ Parts Cleaner
blank lines and charts for product and safety
With or Without lid
information.
Models BIO436 and BIO536 - Eliminate
waste disposal with the smart alternative to
solvent-based parts cleaners! Solution does
not need changing. Working space:
36"L X 22"W X 9"D without lid. Parts load:
siZe
tYPe
Part no
PriCe
300 lbs. Feed your biomatic system with
24 oz
Trigger Bottle
CRC-14021
8.30
Super Biotene concentrate. Contains corrosion
inhibitors. Leaves no residue. Fast drying.
AQMD certified for use in southern CA. Dilution
ratio 1 to 19. Electrics - 115V, 60Hz, 1 Ph.
Uses Biotene cleaning fluid only. 30 gallon capacity.
Parts Washer
FloW
siZe
rate
tYPe
moDel Part no
PriCe
60 Gallon unit
39"L x 31"W x 68"H 300 GPH
with lid
436
GRM-BIO436 1634.60
Heavy-duty industrial grade polyethylene
39"L x 31"W x 43"H 300 GPH
without lid 536
GRM-BIO536 1507.00
plastic. 60 gallon capacity for effective
cleaning. 9" working depth with shelf.
Fixed thermostat, temperature of
110°F. Includes non-adustable backup
thermostat. 1000-watt heater with
Clean-o-matiC ® solvent
separate switch. Industrial grade pump.
Parts Cleaner
115VAC/60HZ/1PH. Flexible Loc-Line® nozzle & flow-through brush.
Stainless-steel work shelf included. Ground fault interrupter protected.
three Way Cleaning action
Model 300 - has a 1/10 HP motor that
delivers 4.5 GPM. Designed with no
siZe
Part no
PriCe
41 x 30 x 39"
SIM500-79260
2136.22
bearings or seals. Immersed in the
liquid, pumps are virtually abrasive
resistant. Pump discharge creates tank
agitation to loosen dirt and grime as
parts soak. Electrics - 1/10 HP, 115V,
60Hz, 1Ph
Please note:
Chemicals, aerosols, oils,
Model 500 - This model features the same tank as the 300 with a
grease etc. cannot be
more powerful 1/3 HP centrifical pump and hydro-jet manifold.
Pump capacity is 40 GPM through the manifold or 18 GPM through
shipped by air. All shipments
the flexible metal hose. Electrics - 1/3 HP, 115V, 60Hz, 1Ph.
of these products must deliver
by Ground Service Only.
siZe
CaP
moDel
Part no
PriCe
44"L x 21-1/2"W x 58"H
16-42 gal
300A
GRM-300-A
1899.70
44"L x 21-1/2"W x 58"H
16-42 gal
500A
GRM-500-A
3200.12
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-7
D egreasers & P arts C leaners P arts W ashers
Deluxe recirculating
heated aqueous
solvent Parts Cleaner
Parts Cleaner
Drum mount
thermoplastic Design
Models DMD232LD and DMD236LD
Selector valve controls flow through
Deluxe durable 16 gauge steel
stay-put nozzle, flow-thru brush, or both.
construction with powder-coated finish.
3-stage filtration: pre-strainer, 590
micron basket, 75 micron cartridge.
Adjustable hose for directing flow.
Safety features: FM approved safety
Deluxe model has work light and
link, GFCI, low level fluid control to
patented retractable pump for easy fluid
changes. Electrics - 115V, 60Hz, 1Ph.
save pump and heater from damage.
for both models. Use Agitene® cleaning
Heater/thermostat: ambient to 115 °F.
Model DH336A is a drum mount type
fluids.
unit, while Model PH522 is a base unit.
Use PH522 when soaking space is
needed. Electrics - 115V, 60Hz, 1Ph.
Use Aquatene® cleaning fluids.
FloW
siZe
rate
CaP
Part no
PriCe
32"L x 18"W x 6-5/8"H
170 GPH
10 gal
GRM-DMD232LD
731.50
FloW
36"L x 20"W x 6-1/8"W
170 GPH
20 gal
GRM-DMD236LD
844.80
siZe
rate
CaP
moDel
Part no
PriCe
39"L x 31"W x 43"H 300 GPH
30 gal
DH336A GRM-DH436-A 1552.10
43"L x 31"W x 40"H 300 GPH
25 gal
PH522
GRM-PH522-A
1523.50
Flood Coolant
system
tempest 20s high
Model 10IMV
Pressure aqueous
16 gauge steel tank with 10
Parts Cleaner
gallon cast iron pump. This unit
stainless steel
handles up to 500 SSU maximum
Power cleans parts with non-abrasive
viscosity. One piece lid allows for
pin-point accuracy. Delivers 3 GPM
quick, easy cleaning of tank sump.
of filtered, heated aqueous cleaning
Chip screen filter extends pump and cutting tool life.
power. This unit has a spray pressure
Tube nozzle is not included. Electrics - 1/8HP, 115V, 3400 RPM.
of 600 psi. No grit used. Hands,
inserted into neoprene gloves, hold
nozzle and parts, direct spray where
siZe
CaP
Part no
PriCe
needed. Holds up to 500 lbs in large
10-1/2"H x 24"L x 9-3/4"W
10 Gallons
GRM-10-IMV-E
291.00
(36 x 36 x 28") lighted cleaning chamber.
Electrics - 1HP, 115V, 60Hz, 1Ph.
siZe
CaP
Part no
PriCe
hanDi-Kleen ®
36"W x 42-1/2"D x 66"H
20 gallons
GRM-20S
7381.00
solvent Parts Cleaner
With Fire safety lid
Model PL36A
Durable 14 gauge steel construction
econo Kleen
with powder-coated finish.
Parts Cleaner
Removable metal work shelf.
bench top
Generous soaking area.
Economical to operate. Reliable
Adjustable metal hose for
abrasive resistant pump. Fluid
directing flow. Fire safety lid.
circulation through flexible hose.
Sludge tray. Easy clean-out with
Safety link closes automatically in
bottom drain. Electrics - 115V,
case of fire. Use Agitene® cleaning
60Hz, 1Ph. Use Super Agitene® fluid.
fluids. Electrics - 115V, 60Hz, 1Ph.
FloW
siZe
rate
CaP
Part no
PriCe
siZe
CaP
Part no
PriCe
36"L x 22"W x 60"H
400 GPH
20 gal
GRM-PL-36-A
896.50
23-1/2"H x 15-1/2"W x 6"D
5 gallons
GRM-EC-A
224.40
H-8
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
P arts W ashers s olvents D egreasers & P arts C leaners
Pump and tank
aQuatene ® 390
systems
biodegradable
34 gallon unit - offers 16 gauge
Cleaning solution
steel tank with three baffles built in.
Chip basket is included. 1/4 HP,
aquatene 390 low Foam
1725 RPM, 3/4 NPT discharge.
Concentrate
Electrics - 1/4HP,115/230V, 60Htz, 1Ph.
Heavy duty formula contains rust
inhibitor and no phosphates or
50 Gallon Unit - offers the same 16 gauge steel tank with 4 baffles
silicones. Should be used heated
built in. Chip basket is included. 3/4HP, 1725 RPM, 1-1/4 NPT
115 - 150°F. Not for use with
discharge. Electrics - 3/4HP, 230/460V, 60Hz, 3Ph.
non-ferrous metals.
siZe
CaP
Part no
PriCe
siZe
tYPe
Part no
PriCe
37-1/2"L x 16"W x 16-1/2"H
34 gal
GRM-X38TN37-E
1050.50
5 gal
Pail
GRM-GM390C5
86.90
42"L x 20"W x 16-1/2"H
50 gal
GRM-X55TN56-F
1496.00
55 gal
Drum
GRM-GM390C55
682.00
low Profile
suPer aGitene ® 141
Pump & tank
hanD-ease ®
Parts Cleaning solvent
system
141 Parts Cleaning solvent
imV series
Rapidly dissolves grease, oil
These units combine the same durable features of our standard units
& residue. Hand-ease contains
with lower working heights, portability, and our economical IM series
cosmetic grade lanolin, reducing irritation
pumps. All units feature 16 gauge construction, chip baskets, internal
and chapping. Requires no water rinse.
baffles, and swivel casters.
Super Agitene® 141 with flash point of 141 °F.
siZe
CaP
Part no
PriCe
siZe
tYPe
Part no
PriCe
44"L x 16”W x 9-3/4" H
21 Gallons
GRM-X21IMV08-E
706.20
5 gal
Pail
GRM-M5005-141
111.10
50 gal
Drum
GRM-M8400-141
1034.00
aQuatene ® 330
biodegradable
suPer aGitene ®
Cleaning solution
hanD-ease ® Parts
Cleaning solvent
aquatene 330
Excellent general purpose
Parts Cleaning solvent
liquid concentrate for quick-mix
Rapidly dissolves grease, oil
convenience. Safe for most
& residue. Hand-ease contains
metals, plastic and rubbers.
cosmetic grade lanolin, reducing irritation
Use heated up to 180°F.
and chapping. Requires no water rinse.
Super Agitene with 105° F flash point.
siZe
tYPe
Part no
PriCe
siZe
tYPe
Part no
PriCe
5 gal
Pail
GRM-GM330C5
60.50
5 gal
Pail
GRM-M5005
106.70
55 gal
Drum
GRM-GM330C55
491.70
50 gal
Drum
GRM-M8400
1017.50
Please note:
biotene Concentrate
Chemicals, aerosols, oils,
Contains corrosion inhibitors.
grease etc. cannot be
Leaves no residue. Fast
drying.AQMD certified for use in
shipped by air. All shipments
southern CA. Dilution ratio 1 to 19.
of these products must deliver
by Ground Service Only.
siZe
tYPe
Part no
PriCe
1 gal
Bottle
GRM-GM550-1
152.90
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-9
P umPs
multi-stage Pump
Dual Purpose
High Pressure Coolant Delivery
Pumps
for submersible
Steadypulsation-freedelivery.Preventsthermal
or Open air
shocktocuttingtools.Permitsgreatlyincreased
model 3e-12n
feedrates.Substantiallylengthenstoollife.Flows
to35GPM.Greatforhighpressurecoolantdelivery!
Dualpurposeoil-filled
pumpthatmaybeused
totallysubmersedorin-line
(fedwithpipeorhose).For
commercial,industrial,and
homeapplicationsincluding
statuaryfountains,waterdisplays,
mOtOr
Part nO
PriCe
1-1/2HP GRM-MSPR7-1.5-F 1285.90
airconditioners,machinetoolcoolants,
2HP GRM-MSPR9-2.0-F 1460.80
andmanyotherapplicationswhereliquid
3HP GRM-MSPR13-3.0-F 1735.80
mustbetransferredorrecirculated.Unithasa6’cord.
mOtOr
maX FlOW
Part nO
PriCe
1/15HP,115V,60Htz 500GPHat1' LIG-503103 178.50
little Giant
machine tool
Coolant unit
replacement
Flood type
Pump
LittleGiantPumpCompany
machinetoolcoolantunitsare
model 4e-34n
designedforusewithvirtually
anymachinetooloperational
Smallsubmersibleoil-filled
need.Foruseonsmalldrillpresses,
pumpwithepoxycoated
toolgrinders,tappingmachinesandsmalllatheequipment.
castaluminumhousing.For
Includesone-gallonplastictankwithscreenandchipcollector,
commercial, industrialand
tubing,flownozzleandpumpwithfan-cooledmotor.
homeapplicationsincluding
statuaryfountains,water
displays,airconditioners,
mOtOr
maX FlOW
VOlts
Part nO
PriCe
1/50HP 108GPHat1' 115 LIG-560610 156.40
machinetoolcoolants,and
manyotherapplicationswhere
liquidmustbetransferredor
recirculated.Unithasa6’cord.
Graymills
mOtOr
maX FlOW
Part nO
PriCe
suPerFlO ® Centrifugal
1/12HP,115V,60Htz710GPHat1' LIG-504103 232.90
immersion Pump
For thin and Heavy liquids
* Flow rate determined by viscosity of fluid
small submersible
TN30Series-areequippedwith
Pump
1/4HP,3,450RPMmotorsand
havea1"NPTverticaldischarge.
nK series
TN40Series-offerhigher
Forcommercial,industrial,
volumeandheadcapabilities
andhomeuseworldwide
thantheTN30Series.TheTN40
whereliquidmustbe
hasa1/2HP,1,725RPMmotor
transferredorrecirculated.
anda1"NPTverticaldischarge.
TN50Series-areequippedwitha3/4HP,
1,725RPMmotorsanda1-1/4"NPTverticaldischarge.
Sizereferstothelengthunderthemotor.
siZe
tYPe
VOlts
Part nO
PriCe
mOtOr
maX FlOW
Part nO
PriCe
12-3/4"L TN36H 230/4603PH GRM-TN36H-F 672.10
1/150HP,115V,60Htz 210GPHat1' LIG-526003 97.75
7-7/8LTN41 115/2301PH GRM-TN41-E 805.20
1/40HP,115V,60Htz 325GPHat1' LIG-527003 118.15
12-7/8LTN46 115/2301PH GRM-TN46-E 822.80
12-7/8LTN56 230/4603PH GRM-TN56-F 943.80
H-10
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
P umPs
standard
machine tool
submersible
replacement
sump Pump
Coolant Pump
model 6-Cim-r
imV series
immersion style
Forresidentialandlight
commercialuse,theModel6
Seriessumppumpsprovide
efficientandreliableservice.
Replaceorupgradethe
Pumpsfeaturea1-1/2"
originalorcommonly
dischargewithamaximum
usedpumps.Immersion
liftof18’.Unithasa10'cord.
style.Totallyenclosed
motorswithsealed
permanentlubricated
bearings.Idealfor
mOtOr
maX FlOW
Part nO
PriCe
pumpingliquidwith
1/3HP,115V,50/60Htz 2750GPHat5" LIG-506271 192.95
finecontaminants.
Callformoreinformation
onsizes,dimensions,capabilities.
Moremodelsavailable.
submersible
Parts Washer
mOtOr
maX FlOW
VOlts
Part nO
PriCe
1/8HP10GPM 115/2301PH GRM-IMV08-E162.80
Pump
1/8HP10GPM 230/4603PH GRM-IMV08-F143.00
model 1-Ys
1/4HP20GPM 115/2301PH GRM-IMV25-E298.10
1/4HP20GPM 230/4603PH GRM-IMV25-F299.20
1/2HP35GPM 230/4603PH GRM-IMV50-F484.00
Forpumpingunheatedmetal
3/4HP45GPM 230/4603PH GRM-IMV75-F618.20
partscleaningsolventwhich
1HP 50GPM 230/4603PH GRM-IMV100-F697.40
isULclassifiedasPJQU,as
describedintheGasandOil
EquipmentDirectory.Cast
aluminumhousing.Unit
hasa6'cord.
machine tool
mOtOr
maX FlOW
Part nO
PriCe
1/50HP,115V,60Htz205GPHat1" LIG-501020 118.15
replacement
Coolant Pump
ims series
suction style
Water Wizard ®
submersible Pump
Replaceorupgradethe
model 5-msP
originalorcommonly
usedpumps.Suction
Includesgardenhose
style.Dependable,
adapterandremovable
economicalreplacements
inletscreenforeasy
forsuctionpumps.
cleaning.Lifetimeoil
supply.Pumpsdown
Callformoreinformationonsizes,
to1/8"(3.2mm.).Unit
dimensions,capabilities.Moremodelsavailable.
comeswith10’cord.
mOtOr
maX FlOW
VOlts
Part nO
PriCe
1/8HP10GPM 115/2301PH GRM-IMS08-E190.30
1/8HP10GPM 230/4603PH GRM-IMS08-F224.40
1/4HP20GPM 115/2301PH GRM-IMS25-E303.60
1/4HP20GPM 230/4603PH GRM-IMS25-F291.50
1/2HP35GPM 230/4603PH GRM-IMS50-F512.60
mOtOr
maX FlOW
Part nO
PriCe
3/4HP45GPM 230/4603PH GRM-IMS75-F614.90
1/6HP,115V,60Htz1200GPHat1' LIG-505000 155.55
1HP 50GPM 230/4603PH GRM-IMS100-F726.00
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-11
C OntaCt & E lECtriCal C lEanErs
Contact Cleaner
QD ™ Contact Cleaner
Advanced Technology Formula
No Residue / Safe on Plastics
Advanced Technology Formula Contact Cleaner does not
A petroleum distillate and alcohol blended precision
contain known ozone depleting substances or VOCs. It
cleaner suitable for cleaning sensitive electronics and
minimizes global warming impact and provides an optimal
electrical equipment. Evaporates quickly, leaves no
alternative to CFC, HCFC and flammable contact cleaners.
residue and is safe to use on all plastics. Contains no
Its blend of HFE and HFC solvents are non-chlorinated,
Class I or Class II Ozone depleting chemicals. Ideal for
non-flammable, plastic safe and fast evaporating. Contact
applications where lower flashpoint solvents can be used.
Cleaner will not damage sensitive, modern plastics such as
NSF K2 registered for use in meat and poultry plants.
Noryl ® ABS, and Lexan ® . Evaporates quickly and leaves no residue.
Non-staining and non-corrosive. High dielectric strength of 27,600
volts. NSF K2 registered for use in meat & poultry plants.
SIZE
TYPE
PART NO
PRICE
16 oz
Aerosol
CRC-03130
14.42
5 gal
Pail
CRC-03131
334.02
SIZE
TYPE
PART NO
PRICE
55 gal
Drum
CRC-03132
2404.46
16 oz
Aerosol
CRC-03070
48.98
CO ® Contact Cleaner
HF ™ Contact Cleaner
Advanced Technology
Improved High Flashpoint
Advanced technology formula CO ® contact cleaner does
Petroleum distillate-based precision cleaner that offers
not contain known ozone depleting substances or VOCs.
the safety of a high flashpoint without leaving a residue.
Its blend of HFE and HFC solvents provide an optimal
It may be used on most plastic materials. Contains no
alternative to CFC, HCFC and flammable contact cleaners.
Class I or Class II ozone depleting chemicals. High
Will not damage sensitive modern plastics such as Noryl ® ,
flashpoint: >142°F. NSF K2 registered for use in meat
ABS and Lexan ® . Regular use will help prevent electrical
and poultry plants.
failures, increase performance and prolong equipment life
by dissolving and rinsing away contaminants. Non-flammable, plastic
SIZE
TYPE
PART NO
PRICE
safe. Evaporates quickly and leaves no residue. Non-chlorinated,
16 oz
Aerosol
CRC-03125
14.74
non-staining and non-corrosive. High dielectric strength of 27,600
5 gal
Pail
CRC-03126
336.56
volts. Contains no VOCs. Contains no Class I or Class II ozone
depleting chemicals. NSF K2 registered for use in meat and poultry
plants.
SIZE
TYPE
PART NO
PRICE
Contact Cleaner 2000 ®
16 oz
Aerosol
CRC-02016
48.66
Precision Cleaner / No Flashpoint
General purpose precision cleaner that provides an
effective alternative to CFC-113-based cleaners when
sensitive plastics are not a concern. It evaporates quickly,
leaves no residue, has no flash or fire point. Contains
PF ™ Precision Cleaner
HCFC (141b) which has use restrictions and may only be
Non-Flammable / Plastic Safe
sold to professional users for applications consistent with
Innovative contact cleaner that offers strong cleaning
the regulation. Not recommended for use on Noryl ® ; or
action, fast evaporation and no residue. Has no flash or
polycarbonate type plastics. Fast cleaning action for the removal of
fire point and is safe to use on plastics. Contains HCFC
dirt, light oils, and other contaminants. Non-conductive and
(141b) which has use restrictions and may only be sold
non-corrosive. NSF K2 registered for use in meat and poultry plants.
to professional users for applications consistent with the
regulation. VOC exempt.
SIZE
TYPE
PART NO
PRICE
16 oz
Aerosol
CRC-03150
24.60
SIZE
TYPE
PART NO
PRICE
5 gal
Pail
CRC-03152
1499.67
16 oz
Aerosol
CRC-03190
38.16
PLEASE NOTE:
Chemicals, aerosols, oils,
grease etc. cannot be
shipped by air. All shipments
of these products must deliver
by Ground Service Only.
H-12
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
C OntaCt & E lECtriCal C lEanErs
Precision Plus ™ Cleaner
Heavy Duty Degreaser
Non-Flammable, Chemically Stable, Non-
Non-Flash / Leaves no Residue
Conductive And Non-Corrosive
Quickly and effectively removes grease, oil, tar, adhesives,
Revolutionary contact cleaner with an aggressive, fast
dirt, grime, corrosion, sludge and other stubborn substances
penetrating, high purity formula that is VOC exempt. Its
to increase operating efficiency of equipment. Heavy Duty
unique blend of HCFC and COzol™ technology is
Degreaser offers quick and efficient degreasing action and
non-flammable, chemically stable, non-conductive and
fast evaporation with no residue. Use caution on plastics.
non-corrosive. It helps prevent contact failure or
No flash or fire point. Non-corrosive and non-staining. High
malfunction by dissolving and rinsing away dust, lint, dirt,
dielectric strength of 36,700 volts. Contains no Class I or
light oils and other contaminants as well as removing KRYTOX® and
Class II Ozone Depleting Chemicals. High cleaning strength of
other fluorinated greases. Contains HCFC 225 which may only be
129 KB. NSF K2 registered.
sold to commercial users. Non-flammable, safe on most plastics.
Evaporates quickly and leaves no residue. VOC exempt. Contains no
SIZE
TYPE
PART NO
PRICE
class I ozone depleting chemicals, NSF K2 registered for use in meat
1 gal
Bottle
CRC-03096
92.91
and poultry plants.
5 gal
Pail
CRC-03097
343.02
55 gal
Drum
CRC-03098
2628.23
SIZE
TYPE
PART NO
PRICE
16 oz
Aerosol
CRC-02210
33.57
Heavy Duty Degreaser II
Non-Chlorinated
NT ™ Precision Cleaner
An excellent alternative for cleaning applications where
No Flash Point, Fast Evaporation,
chlorinated solvents are not acceptable. Effectively
Leaves No Residue.
removes soils and cleans surfaces without residue build-up.
Patented formula relies on advanced COzol™ technology
Use caution on plastics. Non-conductive and non-corrosive.
to effectively remove dirt, light oils and other contaminants
High dielectric strength of 29,000 volts. Low odor
from electrical and electronic equipment. It evaporates
compound, unlike citrus-based products. Contains no
quickly and leaves no residue. Contains no Class I or
Class I or Class II ozone depleting chemicals.
Class II ozone depleting chemicals and is an optimal
NSF K2 registered for use in meat and poulty plants.
alternative to HCFC 141 b-based cleaners when sensitive
plastics aren’t an issue. No flash point, fast evaporation, leaves no
SIZE
TYPE
PART NO
PRICE
residue, non-corrosive & non-conductive. High dielectric strength of
20 oz
Aerosol
CRC-03120
17.39
36,800 volts. Regulatory compliant. NSF K2 registered for use in
1 gal
Bottle
CRC-03121
97.04
meat and poultry plants.
SIZE
TYPE
PART NO
PRICE
16 oz
Aerosol
CRC-03205
24.12
Natural Degreaser ™
biodegradable
Naturally formulated, biodegradable cleaner degreaser
that offers the natural cleaning power of citrus. It does not
Electronic Degreaser
require water wash-off, and does not leave sticky residue
Cleaner/Degreaser
commonly associated with citrus-based cleaners. Contains
no Class I or Class II ozone depleting chemicals or
Utilizes advanced COzol ™ technology to combine
chlorinated solvents. Unique advanced technology
the power of a high performance industrial strength
blend of natural citrus and organic solvents, non-corrosive
cleaner/degreaser with the safety that modern
and effective for use on all metals. High dielectric strength of
regulations demand. The non-chlorinated, non-conductive,
36,500 volts. Suitable for use on some plastics.
non-corrosive, non-staining formula quickly dissolves
grease, oil and sludge. Electronic Degreaser is not
subject to the reporting requirements of RCRA.
SIZE
TYPE
PART NO
PRICE
No flash point. Contains no chlorinated solvents, evaporates quickly
20 oz
Aerosol
CRC-14005
15.60
5 gal
Pail
CRC-14007
402.55
and leaves no residue. Contains no class I or class II ozone depleting
55 gal
Drum
CRC-14008
2898.43
chemicals. NSF K2 registered for use in meat and poultry plants. Test
on plastics. Not labeled for use in California.
SIZE
TYPE
PART NO
PRICE
16 oz
Aerosol
CRC-03215
22.86
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-13
C OntaCt & E lECtriCal C lEanErs
Super Degreaser ™
Contact Cleaner
Advanced Technology
for Plastic
Non-chlorinated, non-conductive, non-corrosive,
Safe on most plastics. Quickly removes light
non-staining and with no flash or fire point. Quickly
contaminants with no residue and no temperature
dissolves grease, oil and sludge for more efficient
control problems. Can be applied while equipment is
operation of mechanical equipment. Evaporates rapidly
operating because of instant evaporation.
and leaves no residue. It is an optimal alternative to
Non-flammable, non-corrosive, non-staining,
1,1,1-Trichloroethane products. Contains no chlorinated
non-chlorinated. NSF reg. no. 127506; K2 rated.
solvents. Low toxicity compared to most chlorinated solvents.
Sold per can.
High dielectric strength of 26,800 volts. Contains no Class I or Class
II ozone depleting chemicals. Not labeled for use in California.
SIZE
TYPE
PART NO
PRICE
12 oz
Aerosol
SPR-S02020
40.59
SIZE
TYPE
PART NO
PRICE
20 oz
Aerosol
CRC-03110
24.28
1 gal
Bottle
CRC-03111
195.26
5 gal
Pail
CRC-03112
960.78
20 oz
Non-Aerosol Spray Can
CRC-03114
30.08
EL ™ 2302 Electrical
Contact Cleaner
Electrical contact cleaner is a quick dry, non-ozone
Quick Clean ™ Safety Solvent and
depleting cleaner that removes dirt, oil, and grease from
Degreaser
sensitive equipment and precision instruments without
leaving any residue. This formula is safe on most plastics.
Safety Solvent and Degreaser
Aerosol is packaged with extension tube for hard to reach
Effective heavy duty degreaser provides strong degreasing
areas. Sold per can.
action, fast evaporation and no residue. It is non-flammable,
VOC exempt, and contains no Class I or Class II ozone
SIZE
TYPE
PART NO
PRICE
depleting chemicals. Use caution on plastics and paints.
11 oz
Aerosol
SPR-S02302
9.25
Test on a small area before use. Non-staining, non-corrosive
and non-conductive. High dielectric strength of 37,500 volts.
SIZE
TYPE
PART NO
PRICE
5 gal
Pail
CRC-03183
261.68
55 gal
Drum
CRC-03184
2190.76
EL ™ 2204 Electronic
Contact Cleaner
Cleans sensitive equipment and precision instruments
quickly without temperature control problems. Instant
evaporation eliminates trapping of airborne contaminants
Citrus Cleaner Degreaser
and allows parts to be handled immediately. Packaged
maintenance Cleaner
with extension tube for hard to reach areas. Because it
Biodegradable, heavy-duty, multi-purpose cleaner and
is non-conductive, equipment can be cleaned while
graffiti remover. Pleasant citrus scent. Removes grimy
operating. Sold per can.
dirt, grease and oil. For surfaces such as Formica™,
Fiberglas™, wood, ceramic tile and some plastics. Ideal
SIZE
TYPE
PART NO
PRICE
for public areas subject to abuse. No CFCs or HCFCs.
10 oz
Aerosol
SPR-S02204000
18.95
Dielectric strength: 40,400 volts.
SIZE
TYPE
PART NO
PRICE
20 oz
Aerosol
SPR-S00757
8.92
Sprayon ® Environmental
Cleaner & Degreaser
This heavy-duty cleaner penetrates fast to remove
Liquo-Sol ™ Environmental
dirt, oil, grease, wax and tar. Leaves no residue.
Cleaner/Degreaser
Contains no Class I or Class II compounds. Dielectric
strength 16,800 volts per mil. Equipped with a high
Non-Aerosol
delivery valve for cleaning efficiency and a 6"
Non-chlorinated, 14 oz, recommended dilution. Gas
extension tube for hard-to-reach areas.
free. Flash point 85°F, For use on electric motors, radar
equipment, gears, brakes, clutches, generators, NSF
SIZE
TYPE
PART NO
PRICE
K2 registered. Sold per can.
15 oz
Aerosol
SPR-S00749
7.90
SIZE
TYPE
PART NO
PRICE
14 oz
Trigger
SPR-20749LQ
8.95
H-14
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
C OntaCt & E lECtriCal C lEanErs
Sprayon ® Electrical Cleaner &
Lubricating Spray
CFC Free Electro Contact Cleaner
Electrical Cleaner & Lubricating Spray is intended for
Fast evaporation. No residue. Low odor.
“Energized Equipment use only”. Not to be used for
Nonconductive. Does not contain HCFCs. Safe on
motorized vehicle maintenance or their parts. Sprayon®
plastics. Inverta spray valve allows one to spray in an
Electrical Cleaner & Lubricating Spray is intended to
upright or inverted position. NSF registered category
clean and/or degrease electrical equipment, where the
K2 registration #059813 (Aerosol), #059814 (Bulk).
cleaning and/or degreasing is accomplished when
electrical current exists or when there is a residual
SIZE
TYPE
PART NO
PRICE
electrical potential from a component, such as a capacitor. Instant
11 oz
Aerosol
LPS-03116
24.46
solvent & cleaning action quickly removes greases, dust & oxidation.
1 gallon
Bottle
LPS-03101
114.16
Restores and maintains precision and original efficiency of electronic
5 gallon
Pail
LPS-03105
482.30
instruments leaving a fine, microscopic film for protection against
corrosion.
SIZE
PART NO
PRICE
16 oz
SPR-S02001
12.80
Electro Contact Cleaner
Non flammable. Fast evaporating. Safe on plastics.
Electrical Contact Cleaner
Quick penetration. Nonconductive. Does not contain
HCFCs. Ideal for electrical/electronic fine parts.
Non-Flammable
Removes light greases, oils, dirt and organic soils.
Removes grease, dirt, oil, flux, and surface
No residue. Conforms to CARB VOC regulations.
contaminants from sensitive electrical/electronic devices.
Also used for equipment requiring non-conductive, low
SIZE
TYPE
PART NO
PRICE
residue degreasing agents. Contains HCFC-141b.
14 oz
Aerosol
LPS-00416
70.13
Switches, relays, motor controls, pc boards, connectors,
tape heads, sensors, control panels, electrically driven
equipment.
SIZE
TYPE
PART NO
PRICE
15 oz
Aerosol
LCT-24379
25.31
NoFlash ® Electro Contact Cleaner
Non-flammable. Non-conductive. Fast evaporating.
Quick penetration. No residue. Superior wetting action.
Safe to use on most surfaces, but may be harmful to
some plastics. Inverta spray valve allows one to spray
in an upright or inverted position. NSF registered
micro-X Nu Contact Cleaner
category K2 registration #131303.
Contact cleaner, VOC Content 74%, NSF Certified K2
Registration # 142149, conforms to the VOC regulations
SIZE
TYPE
PART NO
PRICE
of CARB, OTC and LADCO. Sold per can.
15 oz
Aerosol
LPS-04016
39.83
SIZE
TYPE
PART NO
PRICE
11 oz
Aerosol
LPS-06616
20.15
PLEASE NOTE:
Chemicals, aerosols, oils,
grease etc. cannot be
CFC Free Nu LVC Electro
shipped by air. All shipments
Contact Cleaner
of these products must deliver
Fast evaporation. No rinsing and no residue. Low odor.
by Ground Service Only.
Nonconductive. Safe on metal, plastic, rubber, paint, fabric
and glass surfaces. Low toxicity. Inverta spray valve.
Sold per can.
SIZE
TYPE
PART NO
PRICE
11 oz
Aerosol
LPS-05416
22.90
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-15
C utting & t aPPing
Whamex ™
TRIM ® E850
Is a safe, fast acting concentrated formula that
Premium Emulsion
will save machine cleaning downtime, while
removing the oily residues, scum and insoluble
“Green” vegetable-based technology.
soap deposits that reduce coolant life.
Easy-to-maintain. Mild contact nature. Low
Whamex ™ is made for cleaning out machine
initial-charge odor. Unparalleled lubricity
tool sumps and larger systems, coolant supply
delivers exceptional surface finish on aluminum
lines and coolant recycling equipment. Whamex ™ is compatible with
alloys, exotics, stainless, and high-tensile
most waste treatment and will not degrade Trim ® metalworking fluids
strength steels.
when used as directed.
SIZE
PART NO
PRICE
Will remove heavy soils from machines without affecting paints,
1 gal
MAS096-14510
44.54
coatings, seals, hoses or skirting. It will not leave a slippery residue.
5 gal
MAS096-14500
201.86
Short term corrosion inhibitors prevent flash rusting on machine
54 gal
MAS096-14520
1967.76
surfaces and ways.
SIZE
PART NO
PRICE
1 gal
MAS096-13870
36.88
5 gal
MAS096-13880
163.52
54 gal
MAS096-13890
1580.04
TRIM ® E906
Premium, Low-foaming Emulsion
The newest technology for emulsion-based
cutting. Consistent machining and grinding
for a wide range of materials and applications.
First choice for aerospace, automotive, energy
TRIM ® MicroSol ® 585XT
manufacturers, and specialty job shops.
Extended-Life,
Nonchlorinated Semisynthetic
SIZE
PART NO
PRICE
High-lubricity, microemulsion coolant delivers
1 gal
MAS096-14600
42.50
extended sump life. Provides excellent cooling
5 gal
MAS096-14610
191.68
and mechanical lubricity. Well suited for
54 gal
MAS096-14620
1853.28
machining and grinding gray iron, mixed
metal situations, and titanium alloys.
SIZE
PART NO
PRICE
1 gal
MAS096-11712
38.62
5 gal
MAS096-11713
172.36
54 gal
MAS096-11715
1636.20
TRIM ® VHP ® E814
Low foaming, Chlorine-free,
Long-life Emulsion
Versatile, low- to no-foam, chlorine-free,
long-life, soluble oil performs well in most
machining and grinding applications and
excels in high-pressure environments.
TRIM ® MicroSol ® 685
Maximizes productivity benefits from your
High-lubricity Semisynthetic
high velocity through-the-tool coolant delivery.
Metalworking Fluid
For the performance of a heavy-duty soluble
SIZE
PART NO
PRICE
oil with the cleanliness of a semisynthetic.
1 gal
MAS096-14700
47.28
High performance on a very wide range of
5 gal
MAS096-14710
215.62
materials: aluminum, magnesium, copper
54 gal
MAS096-14720
2121.12
alloys, steels, stainless steels, most plastics,
composites, and cast iron.
SIZE
PART NO
PRICE
PLEASE NOTE:
1 gal
MAS096-11810
40.04
Chemicals, aerosols, oils,
5 gal
MAS096-11820
179.40
54 gal
MAS096-11830
1715.04
grease etc. cannot be
shipped by air. All shipments
of these products must deliver
by Ground Service Only.
H-16
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
C utting & t aPPing
TRIM ® SC520
TRIM ® C115
General-purpose Semisynthetic
Synthetic
Low odor, low cost for the multi-material,
High-performance synthetic fluid for working
multi-operational shop. Controls built-up edge,
cast iron and mild steels; provides excellent
improves tool life. Superior machining results
cooling and chip settling, good tramp oil
on high-speed milling and turning. Controls chip
rejection, and machine cleanliness while
welding on soft, gummy materials.
leaving a protective film on the machine tool.
SIZE
PART NO
PRICE
1 gal
MAS096-13001
31.10
SIZE
PART NO
PRICE
5 gal
MAS096-13005
134.72
1 gal
MAS096-10090
31.18
55 gal
MAS096-13006
1215.00
5 gal
MAS096-10100
135.04
54 gal
MAS096-10110
1251.72
TRIM ® C350
Premium Synthetic Metalworking Fluid
TRIM ® OM 287
Superior lubricity for longer tool life and less
Versatile Cutting Oil
residual stress on machined parts. PRTR
Contains chlorine and inactive sulfur for
compliant; no NPE or SARA 313 chemistry;
multi-metal capability. Works well in modern
no chlorine, phenols, nitrites, copper, triazines,
higher speed “Swiss” machines and machining
or silicone. Corrosion resistant on 7075 and
centers. Very easy to wash off.
2024 aluminum, titanium, nickel, and high-strength
and cobalt-based steel alloys.
SIZE
PART NO
PRICE
1 gal
MAS096-12210
30.40
SIZE
PART NO
PRICE
5 gal
MAS096-12220
129.30
1 gal
MAS096-10490
44.74
54 gal
MAS096-12230
1198.80
5 gal
MAS096-10500
202.96
54 gal
MAS096-10510
1979.64
RPO 6bF
barium-free, low odor, corrosion
TRIM ® C270
inhibitor
High-performance Synthetic
Nonstaining, water displacing, thin-film rust
C270 is a state-of-the-art synthetic coolant.
preventative for use on a variety of metals.
C270 provides excellent cooling and chip
Provides excellent indoor protection for bearings
settling, good tramp oil rejection and machine
and other precision parts, in-process parts in
cleanliness, and meets the need of the modern
storage, as well as parts in transit.
job shop for a single premium synthetic coolant
for virtually all machining operations.
SIZE
PART NO
PRICE
1 gal
MAS096-12570
37.24
5 gal
MAS096-12580
163.52
plastics and composites
54 gal
MAS096-12590
1512.00
nonferrous alloys
SIZE
PART NO
PRICE
Need it
1 gal
MAS096-10210
35.32
5 gal
MAS096-10220
155.84
54 gal
MAS096-10230
1490.40
in a hurry?
Ask for
Priority Shipping!
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-17
C utting & t aPPing
Cutting Fluid
EP-XTRA ®
Tapmatic ® #1 Gold
Tap Magic with EP-XTRA™ is ozone friendly and can be
Great for all metals including aluminum. Excellent for
used to cut on any metal. Without equal on hard metals.
low speed, high pressure applications. Does not contain
chlorinated paraffins, water, solvents or inactive fillers.
SIZE
PART NO
PRICE
4 oz
TAP-10004E
3.80
SIZE
PART NO
PRICE
16 oz
TAP-10016E
12.08
16 fl oz
LPS-40320
15.61
1 gal
LPS-40330
90.10
5 gal
LPS-40340
363.70
Aluminum Cutting Fluid
Most effective on Aluminum
The most effective cutting fluid you can use for work
on aluminum.
Tapmatic ® Dual Action #2
Provides superior extreme pressure lubricity in
machining aluminum and it’s alloys. Reduces friction
SIZE
PART NO
PRICE
and eliminates chip welding. Extends tool life.
4 oz
TAP-20004A
3.80
Improves surface finish.
16 oz
TAP-20016A
12.08
1 gal
TAP-20128A
72.45
5 gal
TAP-20640A
304.75
SIZE
PART NO
PRICE
16 fl oz
LPS-40220
14.89
1 gal
LPS-40230
127.38
Cutting Fluid / ProTap ®
biodegradable Formula
Effective for all cuts, all metals. The original
biodegradable formula.
Tapmatic ® Natural
Biodegradable, does not irritate the skin, eyes or
respiratory tract. Does not contain sulfur, chlorine,
SIZE
PART NO
PRICE
4 oz
TAP-30004P
3.80
chlorinated solvents, water, mineral oil or inactive
16 oz
TAP-30016P
12.08
fillers. Safe on all metals. Eliminates galling
1 gal
TAP-30128P
72.45
and seizing.
5 gal
TAP-30640P
304.75
SIZE
PART NO
PRICE
16 fl oz
LPS-44220
14.39
1 gal
LPS-44230
87.18
Formula 1 Aqueous Cutting Fluid
Earth Friendly
Earth friendly aqueous - base with EP-X3™ performance
booster. All metals.
Tapmatic ® AquaCut
Water based formula. Excellent in applications
SIZE
PART NO
PRICE
where cooling of the tool is desired. Non-flammable,
16 oz
TAP-50016Q
12.08
non-hazardous. Does not contain sulfur, chlorinated
1 gal
TAP-50128Q
72.45
solvents, chlorine or oils. Corrosion inhibitors prevent
5 gal
TAP-50640Q
304.75
flash rusting. Safe on all metals except magnesium.
SIZE
PART NO
PRICE
16 fl oz
LPS-01216
14.80
1 gal
LPS-01228
64.43
Formula 2 Eco-oil Cutting Fluid
Low Smoke / Low Odor
Earth friendly, low smoke, low odor formula with
EP-X3™. All metals.
CAP
PART NO
PRICE
16 oz
TAP-60016C
13.23
1 gal
TAP-60128C
79.35
5 gal
TAP-60640C
332.35
H-18
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
C utting & t aPPing
Tri-Cool ®
Edge Crème
MD-1 Micro-Drop ®
Excellent for vertical applications, biodegradable. Can apply
Vegetable Lubricant
to cutting tools before tapping or reaming. Squeeze tube
MD-1 is a pure vegetable based lubricant that
allows for easy application. For use when drilling, tapping
can be used in various metal cutting operations
blind holes, forming, bending, pre-coating fasteners and
to achieve effective machining productivity on
lubricating rubber seals.
ferrous and non-ferrous metals. Heat stable,
non-chlorine extreme pressure additive. Low
SIZE
PART NO
PRICE
misting. It will not stain aluminum.
10 fl oz
LPS-43100
28.31
Environmentally safe and biodegradable.
SIZE
PART NO
PRICE
1 gal
TRM000-30648
114.64
Edge Lube
White solid waxy bar, biodegradable. Excellent for bandsaw
blades, wheel or disc grinding and sawing applications.
Tri-Cool ® MD-7 Micro-Drop ®
Eliminates heat build-up and belt loading. Extends grinding
Synthetic Lubricant
wheel life. Low toxicity, safe on all metals.
MD-7 is a pure synthetic based lubricant designed
for use in various metal cutting operations. MD-7
is non-toxic, non-flammable, non-corrosive, and
SIZE
PART NO
PRICE
13 oz bar
LPS-43200
21.28
will not become rancid.
SIZE
PART NO
PRICE
1 gal
TRM000-30659
111.90
Cutting Oil
Thread Cutting Lubricant
Superior thread cutting lubricant for use on all types of
ferrous and non-ferrous metals, including brass, copper,
and aluminum. Reduces heat and friction to ease cutting
Tri-Cool ® TC-1
and increase cutting tool life. Sulfur-free, low odor formula.
Premium Synthetic
Excellent anti-weld properties. Foaming aerosol formulation
Lubricant
clings to vertical surfaces. Compatible with all manual and
motor-driven threading equipment.
For Spray and Flood Applications
TC-1 is a highly concentrated premium synthetic
coolant. Contains a non-chlorine extreme pressure
SIZE
TYPE
PART NO
PRICE
16 oz
Aerosol
CRC-14050
8.88
additive for improved tool and surface finish. TC-1
1 gal
Bottle
CRC-14051
39.54
prevents rusting on tool and machine surfaces. It contains a broad
5 gal
Pail
CRC-14052
191.76
spectrum biocide/fungicide for protection against biological growth.
TC-1 is non-toxic, non-flammable, non-corrosive, and biodegradable.
SIZE
PART NO
PRICE
band-Ade ®
1 gal
TRM000-30656
42.11
5 gal
TRM000-30657
199.64
Semi-Synthetic
55 gal
TRM000-30658
1933.82
Sawing Fluid
Does not contain chlorine, sulfur,
petroleum oils or sulfonates and
is biodegradable
Reduces machine wear and improves
PLEASE NOTE:
band saw blade tool life. Water-soluble formulation.
Does not contain silicone. Safer for the environment.
Chemicals, aerosols, oils,
grease etc. cannot be
*Not recommended for use as a spray lubricant. Mix this product with
water as recommended*
shipped by air. All shipments
of these products must deliver
SIZE
PART NO
PRICE
by Ground Service Only.
1 gal
LNX-68004
30.28
5 gal
LNX-68003
110.63
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-19
C utting & t aPPing
“SST” Spray Coolant Systems
Spraymaster ®
With Stainless Steel Tank
Poly or Stainless Tank
This unit is designed for production type
Spraymaster systems provide
applications where less frequent filling is
convenient spray cooling in metal
desirable. Features: Siphon delivery system.
cutting. Features: siphon delivery system.
Heavy-duty 20 gauge, all welded, stainless
Air and coolant are independently controlled by solid brass precision
steel reservoir. 1 gallon reservoir capacity.
needle valves. Brass armored lines are a standard 5' length. 6"
Independent air and coolant control for wide
straight brass nozzle is designed so atomization takes place at nozzle
delivery range. Rugged, one piece molded high density polyethylene
tip for enhanced pattern control. Mounting brackets included for easy
cover for easy filling and cleaning. Solid brass fittings. 6" brass nozzle
installation. 2-outlet line models provide maximum flexibility. Liquid
standard. 2 outlet, 5' plastic lines. Includes mounting bracket.
level gauge easily indicates coolant level at a glance.
Size - 8-7/8" H x 8-3/8" W x 5-5/32" D.
Size 12-1/4" H x 10" W x 5-1/4" D.
Stainless steel dimensions: 9-3/8" H x 8-3/8" W x 5-1/4" D.
TYPE
CAP
PART NO
PRICE
1 Line
1 gal
TRM000-30546
201.54
TYPE
CAP
PART NO
PRICE
2 Lines
1 gal
TRM000-30547
244.93
High Density Polyethylene - 1 Line
1 gal
TRM000-30542
331.90
High Density Polyethylene - 2 Lines
1 gal
TRM000-30543
341.95
Stainless Steel - 1 Line
1 gal
TRM000-30548
333.07
Stainless Steel - 2 Lines
1 gal
TRM000-30549
447.19
LI’L Mister ®
Spray System
These units offer spray cooling with
Spraymaster II ®
features normally available with higher
cost units. Ideal for tool room and other
Siphon Type System
light duty machining applications. Typical
The SprayMaster II is designed
applications include drilling, milling,
for applications where the ability to
turning, grinding, and tapping.
cycle the delivery is required.
Features: Siphon delivery system. Easy reading sight gauge.
Features: siphon delivery system.
5' brass armored or plastic line. Easy mounting bracket.
High performance 7” flexible segmented plastic nozzle.
Independent air/coolant adjustability. One quart reservoir capacity.
Solenoid control for instantaneous response. 5’ brass armored line.
6” straight brass nozzle standard.
Easy to read coolant sight gauge. Easy to mount reservoir bracket
Size - 8-1/2" H x 5-1/4" W x 4" D.
for permanent mounting to application. Independent air and coolant
controls for lean to rich spray delivery.
Size: 12-1/4” H x 10” W x 5-1/4” D.
TYPE
CAP
PART NO
PRICE
Plastic Line
1 qt
TRM000-30540
182.40
Comes complete with UL and CSA approved 110V, 60 Htz power cord,
Brass Line
1 qt
TRM000-30541
203.29
fused and fully grounded.
TYPE
CAP
PART NO
PRICE
1 Line
1 gal
TRM000-30458
596.17
2 Lines
1 gal
TRM000-30459
771.40
MD-1200 Micro - Drop ®
Pressure Delivery , Non-Cyclic
Provides a cost effective solution when
flood cooling is impractical or unavailable.
The MD-1200 offers higher material removal rates, improved part
Drum Mixer
finish, longer tool life, and tighter dimensional tolerances. Solenoid
versions allow these units to be interfaced with CNC controls or
With Check Valve
other signaling devices. 120V, 60 Htz.
Ends emulsion guesswork. No more
hand batching. Reduces waste.
Saves time, money and space.
TYPE
CAP
PART NO
PRICE
1 Line, Manual On/Off
16 oz
TRM000-30801
662.75
Perfectly mixed coolant for your
2 Line, Manual On/Off
16 oz
TRM000-30802
796.72
machine. Keep drums upright.
1 Line, Solenoid On/Off
16 oz
TRM000-30805
796.72
Check valve insures proper mixture instantly. Locknut on dial
2 Line, Solenoid On/Off
16 oz
TRM000-30806
931.08
discourages tampering. Lockout with padlock available. Separate
water shut-off valve. Machined from solid bronze casting. No moving
parts. Steel stand pipe. 40” discharge tube. Models also available for
pails and totes.
We have what you
MAX FLOW
CAP
PART NO
PRICE
want...when you want it.
Mix 0-7%
3 gpm
ZEB-MIX0327
258.00
Mix 0-7%
10 gpm
ZEB-MIX1027
411.00
H-20
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
C utting & t aPPing
Odor Control Tablets
L Series Mechanical
Safe and easy to use. Eliminate and
Skimmer
prevent odors such as hydrogen
sulfide. Contains no formaldehyde or
Simple Disc Skimmer
formaldehyde-releasing chemicals. Most effective way to control
Reliable skimmer that maximizes
odors in any coolant system. Safer and more economical than
coolant performance an extends coolant life.
biocides. Works best when also used with the Zebra Oxygenator™.
Available in three different sizes.
OCTs are not biocides or fungicides. They work by eliminating
Unbreakable disk (lifetime guarantee).
odors created by the decay of anaerobic bacteria. Recommended
Wipers that do not need adjustment (lifetime guarantee).
for sumps of 200 gallons or less. 15 tablets per tube.
PART NO
PRICE
ZEB-XOCT25
29.00
Call for replacement parts. Special high-temp disks for parts washers
also available.
SIZE
TYPE
CAP
PART NO
PRICE
12”
Coolant
5 gal/hr
ZEB-LH300
152.00
18
Coolant
5 gal/hr
ZEB-LH460
250.00
Oxygenator ™
24
Coolant
5 gal/hr
ZEB-LH610
332.00
12
Wash Water
5 gal/hr
ZEB-LW300
269.00
Extends Coolant Life
18
Wash Water
5 gal/hr
ZEB-LW460
326.00
Extend coolant life Eliminate foul
24
Wash Water
5 gal/hr
ZEB-LW610
424.00
odors. Maintain high oxygen levels.
Industrial-grade bronze air diffuser.
Fuel-grade tubing. In the absence of oxygen, anaerobes multiply
causing coolant to spoil. Injecting oxygen into coolant inhibits
anaerobic bacteria growth.
TYPE
CAP
PART NO
PRICE
GS Series Mechanical
3.5 WATT
0-50 gal sumps
ZEB-XBUB5000
51.00
Skimmer
Separating, Smart Disc Skimmer
Separates oil from coolant and returns
clean coolant to sump. Increases coolant
lifetime. Reduces disposal costs because
it removes only tramp oil. Saves time and labor.
Refractometer
Unbreakable disk (lifetime guarantee). Wipers that don’t need
adjustment (lifetime guarantee). Patented gravity separator.
Unique sample “dribble” feed. Shaded field of
Continuous-duty fan-cooled motor with a one year warranty.
view for comfort and quick readings.
Rated at 2 quarts/hour. 7 RPM motor.
Comfortable eyepiece with smooth adjustment.
Easy-clean prism. High precision, clear scale.
SIZE
PART NO
PRICE
Simple zero adjust with lock. Anti-roll supports.
12"
ZEB-GS4H300
243.00
18
ZEB-GS4H460
393.00
Push-on prism flap. Low weight.
TYPE
PART NO
PRICE
0-15% Brix Scale
ZEB-OPT15
365.00
0-30% Brix Scale
ZEB-OPT30
365.00
“b” Series belt Skimmers
Mounts on Sump, Drum or barrel
Improves coolant performance and lifespan.
PLEASE NOTE:
Removable oil tray for easy cleaning - remove the pin
Chemicals, aerosols, oils,
and slide it out. 60Htz, 115V fan cooled motor. 28
grease etc. cannot be
RPM. All are fixed pulley type.
shipped by air. All shipments
SIZE
TYPE
PART NO
PRICE
8” reach
Polyvinyl Belt for Coolant
ZEB-BPF1-08
344.00
of these products must deliver
12” reach
Polyvinyl Belt for Coolant
ZEB-BPF1-12
354.00
18” reach
Polyvinyl Belt for Coolant
ZEB-BPF1-18
365.00
by Ground Service Only.
24” reach
Polyvinyl Belt for Coolant
ZEB-BPF1-24
375.00
8” reach
Stainless Belt for Wash Water
ZEB-BSF1-08
396.00
12” reach
Stainless Belt for Wash Water
ZEB-BSF1-12
406.00
18” reach
Stainless Belt for Wash Water
ZEB-BSF1-18
417.00
24” reach
Stainless Belt for Wash Water
ZEB-BSF1-24
427.00
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-21
C UTTING & T APPING
3/4" Hose Kit
Sidewinder ™ Zero Vertical
14" length with fittings:
2 - segments, 5-3/4" long
Access Skimmer
5/8 & 3/4" nozzles
No Down Time / No Tanks To Rebuild
3/4" Male NPT Connector
Fits anywhere, even on a totally enclosed
machine. Mounts in minutes, and is easy to
move from machine to machine. Skims
underneath conveyors, enclosed pumps, and hard to access areas.
Also works on oil spills. Industrial grade pick up tubing uses ceramic
scraper. Rated at 1 qt per hour. Continuous duty motor.
SIZE
TYPE
PART NO
PRICE
3/4"
3/4 Hose Kit
LCK-60513
14.24
TYPE
PART NO
PRICE
8" reach
ZEB-ZVA8-08
331.00
Segment Packs
SIZE
TYPE
ID
PART NO
PRICE
1/4"
2 - Segments, 5-3/4" Long
1/4"
LCK-41401
7.68
Zebra ® Muscle ™ Coalescer
1/4
25'
1/4
LCK-49420
169.00
1/4
50'
1/4
LCK-49421
338.18
Oil Seperator and Aerator in One
1/2
2 - Segments, 5-3/4" Long
1/2
LCK-51801
8.65
Extends coolant life, optimize coolant
1/2
25’
1/2
LCK-59860
200.20
3/4
2 - Segments, 5-3/4" Long
3/4
LCK-61501
10.79
performance, and reduce disposal
costs. Eliminates foul odors and
coolant
rancidity. Increases sump capacity. Pumps 1 gallon per minute.
Leak-proof fittings. Crush-resistant hoses. Translucent barrel.
Operates with or without lid. One year warranty.
Round Nozzles
4 per package. Priced per piece.
SIZE
PART NO
PRICE
SIZE
ID
PART NO
PRICE
15 Gal
ZEB-F15P
597.00
1/16"
1/4"
LCK-41402
1.28
1/8
1/4
LCK-41403
1.28
1/4
1/4
LCK-41404
1.28
3/8
1/2
LCK-51802
1.45
1/2
1/2
LCK-51803
1.45
1/4" Hose Kit
5/8
3/4
LCK-61503
1.78
3/4
3/4
LCK-61502
1.78
13" Length with Fittings
2 - segments, 5-3/4" long
1/16, 1/8, & 1/4" nozzles
1/8 & 1/4” male NPT connectors
90° Nozzles
4 per package. Priced per piece.
SIZE
ID
PART NO
PRICE
SIZE
ID
PART NO
PRICE
1/16"
1/4"
LCK-41470
1.77
1/4
1/4"
LCK-40413
10.20
1/8
1/4
LCK-41471
1.77
1/4
1/4
LCK-41472
1.77
1/4
1/2
LCK-51828
2.01
3/8
1/2
LCK-51829
2.01
1/2
1/2
LCK-51830
2.01
1/2" Hose Kit
13" Length with Fittings
2 - segments, 5-1/2" long
1/4, 3/8, & 1/2" nozzles
Flared Tubing Replacement Pack
3/8 & 1/2” male NPT connectors
8 - Segments, 5-3/4" long
1 - 1" flare nozzle
Includes 4 each of:
SIZE
ID
PART NO
PRICE
1/2"
1/2"
LCK-50813
11.50
SIZE
ID
PART NO
PRICE
1/4"
1/4"
LCK-40452
37.11
H-22
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
C utting & t aPPing
Flare Nozzles
Double Sockets
2 per package. Priced per piece.
4 per package. Priced per piece.
SIZE
ID
PART NO
PRICE
SIZE
ID
PART NO
PRICE
1"
1/4"
LCK-41407
3.84
1/4"
1/4"
LCK-41409
1.41
1-1/4
1/2
LCK-51807
4.33
1/2
1/2
LCK-51811
1.61
2-1/2
1/2
LCK-51809
4.98
3/4
3/4
LCK-61514
1.96
3
3/4
LCK-61507
5.69
T Fittings
NPT Connectors
2 per package. Priced per piece.
4 per package. Priced per piece.
SIZE
ID
PART NO
PRICE
SIZE
ID
PART NO
PRICE
1/8 NPT
1/4"
LCK-41405
1.28
1/4"
1/4"
LCK-41416
4.26
1/4 NPT
1/4
LCK-41406
1.28
1/2
1/2
LCK-51825
4.75
3/8 NPT
1/2
LCK-51804
1.45
1/2 NPT
1/2
LCK-51805
1.45
3/4 NPT
3/4
LCK-61505
1.78
Side Flow Nozzles
4 per package. Priced per piece.
Y Fittings
2 per package. Priced per piece.
SIZE
ID
PART NO
PRICE
1/4"
1/4"
LCK-41478
2.13
SIZE
ID
PART NO
PRICE
1/4"
1/4"
LCK-41408
3.84
1/2
1/2
LCK-51808
4.33
3/4
3/4
LCK-61511
5.69
End Caps
4 per package. Priced per piece.
SIZE
ID
PART NO
PRICE
Socket to 1/8" FNPT
1/4"
1/4"
LCK-41480
1.28
4 per package. Priced per piece.
1/2
1/2
LCK-51838
1.45
SIZE
ID
PART NO
PRICE
1/4"
1/4"
LCK-41411
1.61
Swivel Nozzles
2 per package. Priced per piece.
SAE Flare Nut Adapters
SIZE
TYPE
ID
PART NO
PRICE
4 per package. Priced per piece.
1/4"
Swivel Nozzles 40
1/4"
LCK-41481
5.69
1/4
Swivel Nozzles 60
1/4
LCK-41482
5.69
SIZE
ID
PART NO
PRICE
3/8"
1/4"
LCK-41412
1.93
1/4
1/4
LCK-41414
1.93
3/8
1/2
LCK-51823
1.99
Male NPT Valves
2 per package. Priced per piece.
Elbow Fittings
SIZE
ID
PART NO
PRICE
1/4"
1/4"
LCK-21192
6.40
2 per package. Priced per piece.
1/2
1/2
LCK-32092
6.40
SIZE
ID
PART NO
PRICE
1/4"
1/4"
LCK-41415
3.55
1/2
1/2
LCK-51824
4.04
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-23
C utting & t aPPing
Female NPT Valves
Flat Nozzle
2 per package. Priced per piece.
Assortment Pack
Includes one each of the following:
SIZE
ID
PART NO
PRICE
Flat slot .040" nozzle
1/4"
1/4"
LCK-21193
6.40
Flat slot .060" nozzle
1/2
1/2
LCK-32093
7.84
Flat 5 hole nozzle
Flat 7 hole nozzle
In-Line Valves
SIZE
ID
PART NO
PRICE
2 per package. Priced per piece.
1/4"
1/4"
LCK-41487
8.13
SIZE
ID
PART NO
PRICE
1/4"
1/4"
LCK-21194
6.40
1/2
1/2
LCK-32094
7.84
Y Reducers
2 per package.
Priced per piece.
In-Line Check Valves
2 per package. Priced per piece.
TYPE
ID
PART NO
PRICE
1/2 to 1/4
1/2"
LCK-51822
4.33
3/4 to 1/2
3/4
LCK-61512
5.69
SIZE
ID
PART NO
PRICE
1/4
1/4"
LCK-21191
6.40
1/2
1/2
LCK-32091
7.84
Adapters
2 per package. Priced per piece.
Flat Hole Nozzles
4 per package. Priced per piece.
TYPE
ID
PART NO
PRICE
1/2 to 1/4
1/2"
LCK-51821
3.19
SIZE
TYPE
ID
PART NO
PRICE
3/4 to 1/2
3/4
LCK-61508
7.80
1/4"
Flat 5 Hole Nozzle
1/4"
LCK-41485
2.04
1/4
Flat 7 Hole Nozzle
1/4
LCK-41486
2.04
1/2
Flat 5 Hole Nozzle
1/2
LCK-51842
2.28
1/2
Flat 7 Hole Nozzle
1/2
LCK-51843
2.28
Modular
Manifolds
Flat Slot Nozzles
Magnetic manifold allows distribution of coolant through 4 separate
openings from one source. Magnet can mount on spindle or worktable
4 per package. Priced per piece.
for convenient access to the work piece. 1/4" ports accept any 1/4"
standard fitting.
SIZE
TYPE
ID
PART NO
PRICE
1/4"
Flat Slot 40 Nozzle
1/4"
LCK-41483
2.04
SIZE
TYPE
PART NO
PRICE
1/4
Flat Slot 60 Nozzle
1/4
LCK-41484
2.04
1/4"
Magnetic Base Manifold
LCK-40400
49.93
1/2
Flat Slot 80 Nozzle
1/2
LCK-51840
2.28
1/2
Flat Slot 125 Nozzle
1/2
LCK-51841
2.28
Don’t see an
Hose
Assembly
item you need?
Pliers
We can source it for you.
SIZE
PART NO
PRICE
1/4"
LCK-78001
14.24
1/2
LCK-78002
14.24
3/4
LCK-78004
18.14
H-24
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
I nhIbItors t reatments C OrrOsiOn P rOduCts
SP-250 ™ Corrosion inhibitor
Corrosion inhibitor
LPS 3 ®
Thin-film, water-displacing corrosion inhibitor
that will not emulsify, even in the presence
Premier rust inhibitor
of alkali. Use for process parts drying and
Forms a transparent, soft, waxy film for protection and
protection of all metals, protection for parts
lubrication. Inhibits rust and corrosion; protects steel
subjected to high humidity conditions,
parts indoors for up to 2 years. Safe on most surfaces.
anti-corrosion coating for shrink wrapped parts,
NSF registered H2: #129027 (Aerosol); #059849 (Bulk)
and moisture displacement for finished parts.Thin,
non-staining dry film protects indoors for up to 9 months. Displaces
SiZE
TYPE
PArT NO
PriCE
water and water-based metalworking compounds from finished stock
11 oz (Net Fill)
Aerosol
LPS-00316
19.84
to provide protection for all metals. Forces moisture to bottom of dip
20 oz
Trigger Bottle
LPS-00322
26.70
tanks for easy removal and re-use.
1 gal
Pail
LPS-03128
90.08
5 gal
Pail
LPS-00305
370.09
SiZE
TYPE
PArT NO
PriCE
5 gal
Pail
CRC-03226
214.32
55 gal
Drum
CRC-03228
1604.09
Extend ®
rust Treatment
One-step rust treatment goes on white and converts
SP-300 ™ Corrosion inhibitor
rust to a durable, black, metal-protective coating in 10
minutes. Wirebrush parts and apply with brush or spray.
industrial Corrosion inhibitor
Surface rust must be present. Use as a primer or finish
Unique blend of solvents, oils and corrosion
coat. Resists temperatures to 250°F intermittent, 200°F
inhibitors that exhibits excellent corrosion
continuous. Approved by the American Bureau of
resistance. Quickly displaces moisture,
Shipping.
excess water-based coolants, and grinding
compounds. Short-to-medium term protection.
SiZE
TYPE
TEmP rANGE
PArT NO
PriCE
Provides a thin, non-drying protective film that
10.5 oz
Aerosol
Up to 250°F, 121°C
LCT-30539
9.21
protects indoors up to 9 months. Effective on all
1 qt
Bottle
Up to 250°F, 121°C
LCT-75430
41.15
metal surfaces. Provides superior protection from
“fingerprint” corrosion.
SiZE
TYPE
PArT NO
PriCE
5 gal
Pail
CRC-03246
173.04
55 gal
Drum
CRC-03248
1281.44
metal rescue rust
remover Liquid
Clean, safe and easy solution to
removing rust from iron and steel.
rPO 6bF
Rust remover bath – just soak, check,
Nonstaining, water displacing, thin-film rust
rinse/dry. It’s that easy! Sold per piece.
preventative for use on a variety of metals.
Provides excellent indoor protection for
SiZE
PArT NO
PriCE
bearings and other precision parts, in-process
1 gal
ARM053-METALRESCUE1GAL
40.00
parts in storage, as well as parts in transit.
5 gal
ARM053-METALRESCUE5GAL
144.00
55 gal
ARM053-METALRESCUE55GAL
1216.00
SiZE
PArT NO
PriCE
1 gal
MAS096-12570
37.24
5 gal
MAS096-12580
163.52
55 gal
MAS096-12590
1512.00
Dry Coat rust Preventative Liquid
PLEASE NOTE:
Water-based liquid rust preventative for ferrous
Chemicals, aerosols, oils,
metals. It can be applied by dip, spray, or
grease etc. cannot be
flowcoating. Dry Coat™ is a user-friendly
shipped by air. All shipments
replacement for solvent and oil-based corrosion
inhibitors. Dries-to-touch! Sold per piece.
of these products must deliver
by Ground Service Only.
SiZE
PArT NO
PriCE
32 fl oz
ARM053-DRYCOATRP32
19.20
5 gal
ARM053-DRYCOATRP5
119.80
55 gal
ARM053-DRYCOATRP55
1079.00
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-25
C OrrOsiOn P rOduCts C oatIngs L ubrICants
metallic Spray
Knock’er Loose ®
Silver
Rust-Oleum metallic spray provides a brilliant metal
Penetrating Solvent
finish with weather-resistant metallic flakes. Provides
An industrial strength, low viscosity lubricant and
excellent rust protection for heavily handled objects,
penetrant designed to quickly loosen and free seized,
such as autos, bikes, fixtures, door hardware and more.
bound or frozen fasteners. It quickly dissolves rust,
It features a comfort tip with a wider finger pad and an
scale, gum, grease and corrosion with a formula that
any-angle spray feature that allows you to spray in any
creeps into cracks, seams, threads and joints better
direction, even upside-down. Corrosion-resistant.
than the competition. KNOCK’ER LOOSE eases the
disassembly of machinery, tools and equipment for
routine maintenance and emergency repairs.
SiZE
PArT NO
PriCE
NSF H2 registered for use in meat and poultry plants. Specially
11 oz
RST-7271-830
7.10
formulated to dissolve rust, varnish, gum and corrosion. Loosens
rusted and corroded nuts, bolts and frozen components. Outperfoms
the competition. Lubricating residue prevents corrosion.
Welder’s Anti-Spatter Spray
SiZE
TYPE
PArT NO
PriCE
8 oz
Spout Can
CRC-03025
7.59
Spray Coating
16 oz
Aerosol
CRC-03020
9.20
Prevents spatter from adhering to surrounding metal
16 oz
Non-aerosol
CRC-03024
9.65
surfaces during welding. Eliminates the need to chisel,
grind or wire brush after welding. Water-based formula
allows easy clean-up without the use of solvent cleaners.
Low odor. Rust inhibiting additive prevents flash rust on
in-process and surrounding metal surfaces.
Food Grade machine Oil
Non-hazardous decomposition.
meets FDA reg. 21 CFr 178.3570
Extremely efficient and effective general purpose lubricant
SiZE
TYPE
PArT NO
PriCE
for use on food processing equipment. Food Grade
16 oz
Aerosol
CRC-03083
9.48
Machine Oil penetrates and loosens rust, scale, dirt and
corrosion to free parts and fasteners. Contains no silicone
and is virtually odorless and colorless. Will not harm metal,
wood, plastic or painted surfaces. Meets FDA regulation 21
CFR 178.3570 for incidental food contact.
Whamex ™
SiZE
TYPE
PArT NO
PriCE
16 oz
Aerosol
CRC-03081
8.49
Is a safe, fast acting concentrated formula that
will save machine cleaning downtime, while
removing the oily residues, scum and insoluble
soap deposits that reduce coolant life.
Whamex™ is made for cleaning out machine
tool sumps and larger systems, coolant supply
lines and coolant recycling equipment. Whamex™
TKX ® All-Purpose Lubricant
is compatible with most waste treatment and will not
Displaces moisture. Loosens rusted or frozen parts.
degrade Trim ® metalworking fluids when used as directed.
Provides a nondrying, long lasting, oily film. Protects
against corrosion. High flash point of 175°F (79°C).
Will remove heavy soils from machines without affecting paints,
Does not contain chlorinated solvents or silicones.
coatings, seals, hoses or skirting it will not leave a slippery residue.
Nonconductive. Safe on fabric, plastic, paint and other
Short term corrosion inhibitors prevent flash rusting on machine
finishes. Inverta spray valve allows one to spray in an
surfaces and ways.
upright or inverted position.
SiZE
PArT NO
PriCE
SiZE
TYPE
PArT NO
PriCE
1 gal
MAS096-13870
36.88
11 oz
Aerosol
LPS-02016
9.13
5 gal
MAS096-13880
163.52
1 gal
Bottle
LPS-02028
50.73
54 gal
MAS096-13890
1580.04
5 gal
Pail
LPS-02005
253.40
Visit
Our Website
To shop online
www.jpgsupplies.com
H-26
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
L ubrICants C OrrOsiOn P rOduCts
The Protector™ Lubricant
LPS 1 ®
711 ®
Premium Lubricant
Sprayon 711 ® is a general maintenance penetrant
unmatched in its versatility and quality. Known as The
Provides a dry, thin lubricating film. Resists oil, dust
Protector™, it’s the clear-cut choice of industry to
and dirt build-up. Fast acting penetration. Displaces
penetrate, lubricate, demoisturize and inhibit corrosion.
moisture. Loosens rusted or frozen parts. Provides a
First, Sprayon 711 ® ’s fast-acting creep factor penetrates
short term, light, corrosion resistant barrier.
the most microscopic irregularities to loosen frozen parts.
Nonconductive. Ideal for delicate mechanisms. Safe
Then, corrosion inhibitors and lubricants leave a protective barrier that
on paint and most plastics. Inverta spray valve allows one to spray in
displaces moisture and prevents rusting to keep your parts working
an upright or inverted position. NSF H2 registered.
freely.
SiZE
TYPE
PArT NO
PriCE
11 oz
Aerosol
LPS-00116
15.40
SiZE
TYPE
PArT NO
PriCE
1 gal
Bottle
LPS-01128
59.94
16 oz
Aerosol
SPR-S00711
5.75
5 gal
Pail
LPS-00105
253.71
WD-40 Lubricant, Anti Corrosive
LPS 2 ®
Displaces moisture. WD-40 gets under water, drives it
heavy-Duty Lubricant
off and keeps it off. WD-40 is a non-conductor and can
Strong, multi-purpose lubricant and penetrant with
be used to dry out electrical and electronic equipment.
added corrosion protection. Provides a nondrying,
WD-40 frees sticky mechanisms and penetrates to free
light, oily film for use on indoor/outdoor equipment.
up frozen or rusted metal parts and fasteners. Keeps
Reduces wear caused by friction and corrosion.
controls and linkages working freely, too. Protects metal.
Displaces moisture. Loosens rusted or frozen parts.
WD-40 lubricates and protects against moisture and
Provides up to one year of protection. Safe on paint and most
corrosive elements. Cleans. WD-40 removes grease,
plastics. Inverta spray valve allows one to spray in an upright or
grime, tar, gum, crayon, water deposits, and much more.
inverted position.
It also dissolves adhesives, allowing for easy removal of labels
and excess bonding materials. Lubricates. WD-40 finds and
lubricates squeaks in hard-to-get-at mechanisms. Because
SiZE
TYPE
PArT NO
PriCE
WD-40 is silicone-free, there’s no messy, gummy residue.
11 oz
Aerosol
LPS-00216
15.28
1 gal
Bottle
LPS-02128
62.50
11 oz Smart Straw Aerosol shown.
5 gal
Pail
LPS-00205
277.35
SiZE
TYPE
PArT NO
PriCE
3 oz
Handy Can Aerosol
WDC-110108
3.44
11 oz
Smart Straw Aerosol
WDC-110078
7.64
1 gal
Bottle
WDC-10110
28.06
rustbreaker ™ Penetrants
5 gal
Pail
WDC-10117
128.94
55 gal
Drum
WDC-10118
1393.84
Inhibits corrosion on unpainted metal surfaces.
High-solids, non-staining white grease. Jet stream
sprays up to two feet. Contains no CFCs, HCFCs,
chlorinated solvents, or O.D.P. Fast acting. Creep
properties. Equipped with easy-action tilt-spray valve.
Non-staining. Sold per can.
WD-40 Container
SiZE
TYPE
PArT NO
PriCE
16 oz
Aerosol
SPR-S00103
6.83
Empty Plastic Spray Applicator
Container for holding bulk liquids
PLEASE NOTE:
SiZE
TYPE
PArT NO
PriCE
Chemicals, aerosols, oils,
12 oz
Trigger Bottle
WDC-10100
4.18
grease etc. cannot be
shipped by air. All shipments
of these products must deliver
by Ground Service Only.
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-27
C OrrOsiOn P rOduCts L ubrICants
2-26 ®
Atomizer
multi-Purpose Precision Lubricant
model b
Multi-purpose, plastic safe lubricant, penetrant, and
Refillable and rechargable.
corrosion inhibitor that helps prevent electrical
malfunctions caused by water penetration, humidity,
condensation or corrosion. 2-26 ® drives out moisture and
leaves a thin, long lasting film to protect against corrosion.
Excellent for use around modern plastics and insulators.
Cleans, lubricates, penetrates and loosens corrosion.
SiZE
TYPE
PArT NO
PriCE
Prevents corrosion by displacing moisture. Restores resistance
16 oz
Aluminum
MSR-8000PL
29.22
16 oz
Plated Aluminum
MSR-8100PL
34.14
values and helps stop current leakage. Helps restore water damaged
electrical equipment. Cleans light soils and contaminants. Will not
harm modern plastics, including polycarbonates, ABS and Noryl ®.
SiZE
TYPE
PArT NO
PriCE
6 oz
Aerosol
CRC-02004
6.15
Sure Shot Sprayer
16 oz
Aerosol
CRC-02005
8.21
16 oz
Trigger Bottle
CRC-02007
10.13
model A
1 gal
Bottle
CRC-02006
44.98
Designed to spray virtually any light bulk
5 gal
Pail
CRC-02009
197.67
liquid. Pressurize with standard air chuck to
80 - 150 psi. Spray a Full container of liquid
from a single charge of air. 32 oz capacity.
3-36 ®
TYPE
PArT NO
PriCE
multi-Purpose Lubricant and
Adjustable from Mist to Stream - Painted
MSR-1002
47.18
Corrosion inhibitor
Adjustable from Mist to Stream - Chrome Plated
MSR-2002
73.13
Extra, Extra Fine Mist Only, Chrome Plated
MSR-7700
76.40
Multi-purpose lubricant, penetrant and corrosion inhibitor
forms a clear, thin film that lubricates, prevents corrosion,
displaces moisture, penetrates and cleans. 3-36 ® drives
out moisture and leaves a thin, long lasting film to protect
against corrosion. Cleans, lubricates, penetrates and
Penetrating Oil
loosens corrosion. Prevents corrosion by displacing moisture.
Penetrates, lubricates, and displaces moisture.
Penetrates through corrosion to loosen frozen parts. Lubricates
Protects against rust and corrosion.
without leaving a sticky residue. Cleans light soils and contaminants.
Contains no ODCs.
SiZE
TYPE
PArT NO
PriCE
6 oz
Aerosol
CRC-03004
5.67
16 oz
Aerosol
CRC-03005
6.78
16 oz
Trigger Bottle
CRC-03007
7.65
1 gal
Bottle
CRC-03006
40.98
5 gal
Pail
CRC-03009
171.52
SiZE
TYPE
TEmP rANGE
PArT NO
PriCE
55 gal
Drum
CRC-03011
1383.90
12 oz
Aerosol
100°F, 38°C
LCT-51221
7.43
ultra-Lite 3-36 ®
Non-Staining
An ultra-thin, non-staining lubricant that resists oil,
PLEASE NOTE:
dust, and dirt build-up. Penetrates into the most minute
Chemicals, aerosols, oils,
openings, sealing out moisture and preventing corrosion
with an ultra-light protective film. Excellent for drying out
grease etc. cannot be
electrical/electronic components. Resists oil, dust and dirt
shipped by air. All shipments
build-up. NSF H2 registered for use in meat and poultry
of these products must deliver
plants.
by Ground Service Only.
SiZE
TYPE
PArT NO
PriCE
16 oz
Aerosol
CRC-03160
9.14
H-28
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
L ubrICants C OrrOsiOn P rOduCts
Technical Grade 3-36 ®
WrL ™ Aerosol
multi-Purpose Precision Lubricant
Wire rope and Chain Lubricant
Multi-purpose, plastic safe lubricant, penetrant, and
Quickly penetrates to the wire rope core or between
corrosion inhibitor that helps prevent electrical malfunctions
pin and roller bushing for maximum rope and chain
caused by water penetration, humidity, condensation or
lubrication. Forms a nondrying, nontacky, flexible outer
corrosion. Technical Grade 3-36® drives out moisture and
film. Will not flake, peel, or dry out. Lead-Free. USDA
leaves a thin, long lasting film to protect against corrosion.
authorized. Prolongs rope and chain life. Stops rust and
Excellent for use around plastics and insulators. Cleans,
corrosion. Service rated -25°F (-32°C) to 350°F (175°C).
lubricates, penetrates and loosens corrosion.
Black in color.
Prevents corrosion by displacing moisture. Restores resistance
values and helps stop current leakage. Helps restore water damaged
SiZE
TYPE
PArT NO
PriCE
electrical equipment. Cleans light soils and contaminants. Will not
11 oz
Aerosol
JEL-34041
10.34
harm plastics, including polycarbonates, ABS, and Noryl®.
SiZE
TYPE
PArT NO
PriCE
16 oz
Aerosol
CRC-03003
8.10
Chainmate ®
Chain and Wire rope Lubricant
Fortified with molybdenum disulfide. Increases the life
All Purpose Silicone Lube
of chains and wire ropes. Effective under extreme
Lubricant
temperature and pressure ranges. Deep penetration to
the core of wire ropes. Reduces wear caused by friction
5% silicone formula. Reduces friction and sticking.
and corrosion. High adhesion. Use with guards in place
Protects against corrosion and oxidation with an invisible
to eliminate costly down time.
film that repels water. Compatible with most surfaces; will
not attack most plastics. Effective from -50°F to +375°F.
Equipped with SPRAY ANYWAY™; valve and extension
SiZE
TYPE
PArT NO
PriCE
11 oz
Aerosol
LPS-02416
17.01
tube.Uses: Rubber moldings, windows, sliding wood sur-
faces, sewing equipment, sliding racks, dissimilar metals, springs,
leather, doors, hinges, weather-stripping, plastic assemblies.
SiZE
TYPE
PArT NO
PriCE
16 oz
Aerosol
SPR-S00206
5.60
Chain and Wire rope Lubricant
Extreme Duty Synthetic Lubricant with moly
Specifically formulated blend of synthetic lubricants
and an organic molybdenum anti-wear additive that
penetrates deep and leaves a tough film that lubricates
and protects. Chain and Wire Rope Lube extends the
WLD ™ Aerosol
working life of chains and wire rope and reduces wear
caused by friction and corrosion. Resists water wash-off
Wire Line Dressing
and high-temperature sling-off. Absorbs pin/bushing shock
A highly adhesive, water resistant lubricant containing
and cushions rollers, pins and bushings. Can be applied with guards
rust and corrosion inhibitors that prevent moisture from
in place to eliminate costly downtime. High temperature stability
penetrating wire lines, ropes, cables, and sheave grooves.
(up to 350° F continuous)
Will not run, drip, or be thrown off moving chain. Forms an
impervious film which does not attract dust or dirt.
SiZE
TYPE
PArT NO
PriCE
Contains molybdenum disulfide (MoS2) and graphite,
16 oz
Aerosol
CRC-03050
13.23
which reduces friction or wear between stands. Ideal for use in salt
water enviornments. Penetrates to the core. No heating required.
Nonconductive. Long lasting. Prevents corrosion. Service rated: -25°F
(-32°C) to 350°F (175°C). Black in color.
Extreme Duty Open Gear & Chain Lube
SiZE
TYPE
PArT NO
PriCE
11 oz
Aerosol
JEL-28541
14.62
A Tough, Tacky, Solid Film Lubricant
Used for reducing friction and wear. Heavy-duty compound
specially prepared to penetrate pores of metal, with
exceptional “stay-put” characteristics. Provides maximum
lubrication and shock protection, reduces gear noise,
lubricates, prevents scoring and welding of gear teeth.
Contains moly and graphite, resists heat and pressure.
Will not wash or wear because of weather.
SiZE
TYPE
PArT NO
PriCE
16 oz
Aerosol
CRC-03058
13.46
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-29
C OrrOsiOn P rOduCts L ubrICants Z InC C oatIngs t ermInaL P roteCtor
Dry PTFE Lube Dry Film Lubricant
bright Zinc-it ® instant Cold Galvanize
industrial Strength
high Shine
A multi-purpose, micro-thin film containing PTFE, the
Epoxy ester-based, light duty sacrificial zinc coating that
advanced dry film lubricant technology from DuPont.
inhibits corrosion and provides the beauty of a high shine
Penetrates and bonds to most surfaces including metal,
aluminum finish. Recommended for touch-up and repair of
wood, rubber, plastic and glass. It forms a micro-thin film
bright finish, hot-dip galvanized surfaces. Protects base
that prevents sticking, reducing friction and wear. NSF H2
metal even when scratched or abraded. Fast-drying, dries
registered for use in meat and poultry plants. Resists dirt
to the touch in 15 minutes.
and dust build-up. Seals out moisture and provides a
barrier film that inhibits corrosion. Wide temperature range
SiZE
TYPE
PArT NO
PriCE
(-40°F to 450°F). Ultra low coefficient of friction.
16 oz
Aerosol
CRC-18414
11.90
SiZE
TYPE
PArT NO
PriCE
16 oz
Aerosol
CRC-03044
9.84
Zinc-it ® instant Cold Galvanize
95% Pure Zinc
Electrical Grade Silicone Lubricant
High-performance coating of 95% pure zinc that
electrochemically bonds with ferrous metals to form a
Dry Film Silicone Lubricant
galvanic cell. ZINC-IT is an excellent touch-up for
Multi-purpose formula lubricates, waterproofs and protects
damaged galvanized coatings. Actively fights rust and
with a thin, clear, non-staining film. Superior lubricity for
corrosion with a film of 95% pure zinc. Protects base
metal and non-metal surfaces. Non-hardening lubricant
metal even when scratched or abraded. Fast-drying.
minimizes corrosion. Wide effective temperature range
Dries to the touch in 15 minutes. Excellent weldability.
(-40°F to 400°F). Low surface tension permits better
coverage and deeper penetration.
SiZE
TYPE
PArT NO
PriCE
Meets FDA regulation 21 CFR 178.3570 for incidental food contact.
16 oz
Aerosol
CRC-18412
10.33
1 gallon
Pail
CRC-18413
242.12
SiZE
TYPE
PArT NO
PriCE
16 oz
Aerosol
CRC-02094
8.61
battery Terminal Protector
ViperLube ™
Lead Free
high Performance Synthetic Grease
Apply to battery terminals to provide a soft, dry, lead-free
protective coating that keeps moisture, salts and road
NLGI Grade 2/Severe Duty GC-LB Grease provides
grime from corroding metal contacts. Enhances battery
superior protection against equipment exposed to a
life and power by preventing corrosion-related leakage.
wide range of operating temperatures and environments.
Soft, flexible film completely encapsulates exposed
Use as a lubricant and protective anti-rust film on
surfaces and will not become brittle, crack or peel. Red
bearings, machine parts, equipment, or as a release
color provides easy visual inspection of application. Dries
agent on gaskets and seals.
quickly and protects instantly.
NSF H1 rated for incidental food contact.
SiZE
TYPE
PArT NO
PriCE
SiZE
TYPE
TEmP rANGE
PArT NO
PriCE
12 oz
Aerosol
CRC-03175
11.34
1 cc
Tube
400°F, 204°C
LCT-36780
0.88
0.42 oz
Tube
400°F, 204°C
LCT-36784
2.75
400 gm
Can
400°F, 204°C
LCT-36783
21.35
3 oz
Tube
400°F, 204°C
LCT-36781
6.96
10.1 oz
Aerosol
400°F, 204°C
LCT-36786
9.34
14 oz
Cartridge
400°F, 204°C
LCT-36782
13.55
30 lb
Pail
400°F, 204°C
LCT-37061
372.54
PLEASE NOTE:
Chemicals, aerosols, oils,
grease etc. cannot be
Call us for more details or
shipped by air. All shipments
of these products must deliver
product specifications
by Ground Service Only.
H-30
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
L ubricants & P enetrants
Knock’er loose ®
Penetrating solvent
tKX ®
An industrial strength, low viscosity lubricant and
penetrant designed to quickly loosen and free seized,
all-Purpose lubricant
bound or frozen fasteners. It quickly dissolves rust,
Displaces moisture. Loosens rusted or frozen parts.
scale, gum, grease and corrosion with a formula that
Provides a nondrying, long lasting, oily film. Protects
creeps into cracks, seams, threads and joints better
against corrosion. High flash point of 175°F (79°C).
than the competition. KNOCK’ER LOOSE eases the
Does not contain chlorinated solvents or silicones.
disassembly of machinery, tools and equipment for
Nonconductive. Safe on fabric, plastic, paint and other
routined maintenance and emergency repairs. NSF
finishes. Inverta spray valve allows one to spray in an
H2 registered for use in meat and poultry plants. Specially
upright or inverted position.
formulated to dissolve rust, varnish, gum and corrosion.
Loosens rusted and corroded nuts, bolts and frozen components.
siZe
tYPe
Part no
PriCe
Outperfoms the competition. Lubricating residue prevents corrosion.
11 oz
Aerosol
LPS-02016
9.13
1 gal
Bottle
LPS-02028
50.73
5 gal
Pail
LPS-02005
253.40
siZe
tYPe
Part no
PriCe
8 oz
Spout Can
CRC-03025
7.59
16 oz
Aerosol
CRC-03020
9.20
16 oz
Non-aerosol
CRC-03024
9.65
lPs 1 ®
Food Grade
Premium lubricant
Penetrating oil
Provides a dry, thin lubricating film. Resists oil,
dust and dirt build-up. Fast acting penetration.
meets nsF and FDa standards
Displaces moisture. Loosens rusted or frozen
An effective and efficient general purpose penetrant for
parts. Provides a short term, light, corrosion
use on all food processing equipment. The highly refined
resistant barrier. Nonconductive. Ideal for delicate
white mineral oil is colorless, odorless and tasteless to
mechanisms. Safe on paint and most plastics.
meet NSF and FDA standards. Food grade penetrating oil
Inverta spray valve allows one to spray in an upright or
can be used to loosen rust, scale and corrosion around
inverted position. NSF H2 registered.
fasteners and hose fittings on food processing equipment.
NSF H1 registered for incidental food contact. General
siZe
tYPe
Part no
PriCe
purpose, non-silicone lubricant for use on all food processing
11 oz
Aerosol
LPS-00116
15.40
equipment. Eases disassembly of mechanical equipment, fittings
1 gal
Bottle
LPS-01128
59.94
and fixtues.
5 gal
Pail
LPS-00105
253.71
siZe
tYPe
Part no
PriCe
16 oz
Aerosol
CRC-03086
7.99
lPs 2 ®
Food Grade
heavy-Duty lubricant
machine oil
Strong, multi-purpose lubricant and penetrant
with added corrosion protection. Provides a
meets FDa reg. 21 CFr 178.3570
nondrying, light, oily film for use on indoor/outdoor
Extremely efficient and effective general purpose lubricant
equipment. Reduces wear caused by friction and
for use on food processing equipment. Food Grade
corrosion. Displaces moisture. Loosens rusted
Machine Oil penetrates and loosens rust, scale, dirt and
or frozen parts. Provides up to one year of
corrosion to free parts and fasteners. Contains no silicone
protection. Safe on paint and most plastics. Inverta
and is virtually odorless and colorless. Will not harm
spray valve allows one to spray in an upright or inverted position.
metal, wood, plastic or painted surfaces. Meets FDA
regulation 21 CFR 178.3570 for incidental food contact.
siZe
tYPe
Part no
PriCe
11 oz
Aerosol
LPS-00216
15.28
siZe
tYPe
Part no
PriCe
1 gal
Bottle
LPS-02128
62.50
16 oz
Aerosol
CRC-03081
8.49
5 gal
Pail
LPS-00205
277.35
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-31
L ubricants & P enetrants
rustbreaker ™
Penetrants
WD-40 Container
Inhibits corrosion on unpainted metal surfaces.
empty Plastic spray applicator
High-solids, non-staining white grease. Jet stream
sprays up to two feet. Contains no CFCs, HCFCs,
Container for holding bulk liquids
chlorinated solvents, or O.D.P. Fast acting. Creep
properties. Equipped with easy-action tilt-spray valve.
Non-staining. Sold per can.
siZe
tYPe
Part no
PriCe
12 oz
Trigger Bottle
WDC-10100
4.18
siZe
tYPe
Part no
PriCe
16 oz
Aerosol
SPR-S00103
6.83
Penetrating oil
Penetrates, lubricates, and displaces moisture.
the Protector ™
Protects against rust and corrosion.
Contains no ODCs.
lubricant
711®
Sprayon 711 ® is a general maintenance penetrant
unmatched in its versatility and quality. Known as The
Protector™, it’s the clear-cut choice of industry to
penetrate, lubricate, demoisturize and inhibit corrosion.
First, Sprayon 711 ® ’s fast-acting creep factor penetrates
the most microscopic irregularities to loosen frozen
siZe
tYPe
temP ranGe
Part no
PriCe
parts. Then, corrosion inhibitors and lubricants leave a
12 oz
Aerosol
100°F, 38°C
LCT-51221
7.43
protective barrier that displaces moisture and prevents
rusting to keep your parts working freely.
siZe
tYPe
Part no
PriCe
16 oz
Aerosol
SPR-S00711
5.75
Kb 88
Penetrant
Penetrant, temp range 300 F, flash point 151
F, VOC content 43%, specific gravity .86 -
.88, dielectric strength 31, 500 volts, aerosol
WD-40 lubricant, anti Corrosive
propellant carbon dixoide, bright red,
Displaces moisture. WD-40 gets under water, drives it
penetrates, VOC compliant, cuts through
off and keeps it off. WD-40 is a non-conductor and can
rust and then rapidly penetrates and loosens
be used to dry out electrical and electronic equipment.
frozen parts, petroleum base, NSF H2. Sold per pc.
WD-40 frees sticky mechanisms and penetrates to free
up frozen or rusted metal parts and fasteners. Keeps
siZe
tYPe
Part no
PriCe
controls and linkages working freely, too. Protects metal.
16 oz
Aerosol
LPS-02316
15.30
WD-40 lubricates and protects against moisture and
22 oz
Trigger Bottle
LPS-02322
21.50
corrosive elements. Cleans. WD-40 removes grease,
1 gal
Bottle
LPS-02301
104.91
5 gal
Pail
LPS-02305
446.13
grime, tar, gum, crayon, water deposits, and much more.
55 gal
Drum
LPS-02355
4556.85
It also dissolves adhesives, allowing for easy removal of labels
and excess bonding materials. Lubricates. WD-40 finds and
lubricates squeaks in hard-to-get-at mechanisms. Because
WD-40 is silicone-free, there’s no messy, gummy residue.
11 oz Smart Straw Aerosol shown.
Please note:
Chemicals, aerosols, oils,
siZe
tYPe
Part no
PriCe
grease etc. cannot be
3 oz
Handy Can Aerosol
WDC-110108
3.44
11 oz
Smart Straw Aerosol
WDC-110078
7.64
shipped by air. All shipments
1 gal
Bottle
WDC-10110
28.06
of these products must deliver
5 gal
Pail
WDC-10117
128.94
55 gal
Drum
WDC-10118
1393.84
by Ground Service Only.
H-32
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
L ubricants & P enetrants
atomizer
2-26 ®
model b
multi-Purpose Precision lubricant
Multi-purpose, plastic safe lubricant, penetrant,
Refillable and rechargable.
and corrosion inhibitor that helps prevent electrical
malfunctions caused by water penetration, humidity,
condensation or corrosion. 2-26 ® drives out moisture
and leaves a thin, long lasting film to protect against
corrosion. Excellent for use around modern plastics and
insulators. Cleans, lubricates, penetrates and loosens
corrosion. Prevents corrosion by displacing moisture.
siZe
tYPe
Part no
PriCe
Restores resistance values and helps stop current leakage. Helps
16 oz
Aluminum
MSR-8000PL
29.22
restore water damaged electrical equipment. Cleans light soils and
16 oz
Plated Aluminum
MSR-8100PL
34.14
contaminants. Will not harm modern plastics, including
polycarbonates, ABS and Noryl ®
siZe
tYPe
Part no
PriCe
6 oz
Aerosol
CRC-02004
6.15
16 oz
Aerosol
CRC-02005
8.21
sure shot sprayer
16 oz
Trigger Bottle
CRC-02007
10.13
model a
1 gal
Bottle
CRC-02006
44.98
5 gal
Pail
CRC-02009
197.67
Designed to spray virtually any light bulk
liquid. Pressurize with standard air chuck
to 80 - 150 psi. Spray a Full container of
liquid from a single charge of air.
32 oz capacity.
3-36 ®
multi-Purpose lubricant and
Corrosion inhibitor
tYPe
Part no
PriCe
Adjustable from Mist to Stream - Painted
MSR-1002
47.18
Multi-purpose lubricant, penetrant and corrosion
Adjustable from Mist to Stream - Chrome Plated
MSR-2002
73.13
inhibitor forms a clear, thin film that lubricates, prevents
Extra, Extra Fine Mist Only, Chrome Plated
MSR-7700
76.40
corrosion, displaces moisture, penetrates and cleans.
3-36 ® drives out moisture and leaves a thin, long
lasting film to protect against corrosion. Cleans,
lubricates, penetrates and loosens corrosion. Prevents
corrosion by displacing moisture. Penetrates through
Freeze & release
corrosion to loosen frozen parts. Lubricates without leaving
Loctite ® Freeze & Release instantly freezes
a sticky residue. Cleans light soils and contaminants.
seized and rusted parts (bolts, nuts, studs) down
to -45ºF (-43°C). The exceptional shock-freeze
siZe
tYPe
Part no
PriCe
effect causes microscopic cracks in the layer of
6 oz
Aerosol
CRC-03004
5.67
rust, allowing the lubricating ingredient to wick
16 oz
Aerosol
CRC-03005
6.78
directly into the rust by capillary action. The
16 oz
Trigger Bottle
CRC-03007
7.65
assembly can be easily dismantled after allowing
1 gal
Bottle
CRC-03006
40.98
1–2 minutes penetration time. Sold per can.
5 gal
Pail
CRC-03009
171.52
55 gal
Drum
CRC-03011
1383.90
siZe
tYPe
Part no
PriCe
13.52 fl oz
Aerosol
LCT-996456
16.40
ultra-lite 3-36 ®
non-staining
An ultra-thin, non-staining lubricant that resists oil,
dust, and dirt build-up. Penetrates into the most minute
openings, sealing out moisture and preventing corrosion
with an ultra-light protective film. Excellent for drying out
electrical/electronic components. Resists oil, dust and
MasTers
dirt build-up. NSF H2 registered for use in meat and
poultry plants.
of CosT
siZe
tYPe
Part no
PriCe
16 oz
Aerosol
CRC-03160
9.14
Saving
SoluTions
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-33
L ubricants & P enetrants
technical Grade 3-36 ®
Food Grade
multi-Purpose Precision lubricant
silicone lubricant
Multi-purpose, plastic safe lubricant, penetrant, and
industrial multi-Purpose lubricant
corrosion inhibitor that helps prevent electrical
Multi-purpose silicone spray for food processing and
malfunctions caused by water penetration, humidity,
handling applications. It forms a colorless, odorless,
condensation or corrosion. Technical Grade 3-36 ® drives
non-staining film that lubricates and protects in most
out moisture and leaves a thin, long lasting film to protect
metal to non-metal applications. Silicone film eliminates
against corrosion. Excellent for use around plastics and
binding and sticking while protecting most surfaces. In
insulators. Cleans, lubricates, penetrates and loosens
addition, it may be used as a release agent. Harmless
corrosion. Prevents corrosion by displacing moisture.
to most rubbers and plastics. Wide effective temperature
Restores resistance values and helps stop current leakage. Helps
range (-40°F to 400°F). Excellent release agent and lubricant for
restore water damaged electrical equipment. Cleans light soils and
all surfaces. Meets FDA Regulation 21 CFR 178.3570 for incidental
contaminants. Will not harm plastics, including polycarbonates, ABS,
food contact. NSF H1 registered for incidental food contact.
and Noryl ® .
siZe
tYPe
Part no
PriCe
siZe
tYPe
Part no
PriCe
16 oz
Trigger Bottle
CRC-03039
12.63
16 oz
Aerosol
CRC-03003
8.10
16 oz
Aerosol
CRC-03040
7.59
5 gal
Pail
CRC-03041
262.44
55 gal
Drum
CRC-03042
1895.27
liqui-sol ™
all-Purpose silicone lubes
extreme Duty
Compatible with most surfaces, will not attack
most plastics. Will not interfere with painting or
silicone lubricant
decorating. Trigger spray can. Non-aerosol.
industrial
Temperature range; -50 to +375°F. Sold per can.
Premium grade silicone fluid that exhibits superior
lubrication and temperature viscosity characteristics.
Use Extreme Duty Silicone on all metallic and
non-metallic surfaces. Reduces friction and galling
even on metal-to-metal contact areas. High temperature
siZe
tYPe
Part no
PriCe
(-100°F to 450°F), high pressure (withstands 1200 psi
14 oz
Trigger Can
SPR-A000206LQ
9.06
Falex test). High grade release and parting agent. Clear,
non-staining, odorless film resists moisture.
siZe
tYPe
Part no
PriCe
16 oz
Aerosol
CRC-03030
12.63
heavy-Duty
silicone lubricant
Meets FDA regulation for incidental food contact.
all Purpose
Meets NSF requirements for H1. Silicone-rich
formula. Water-based formula. Colorless and
silicone lube
odorless. Ideal for rubber and plastic surfaces.
lubricant
Eliminates sticking, binding and squeaking. Does
5% silicone formula. Reduces friction and sticking.
not contain chlorinated solvents. Nonstaining.
Protects against corrosion and oxidation with an
Safe on most surfaces.
invisible film that repels water. Compatible with most
surfaces; will not attack most plastics. Effective from
siZe
tYPe
Part no
PriCe
-50°F to +375°F. Equipped with SPRAY ANYWAY™;
13 oz
Aerosol
LPS-01516
17.06
valve and extension tube.Uses: Rubber moldings,
windows, sliding wood surfaces, sewing equipment,
sliding racks, dissimilar metals, springs, leather, doors,
hinges, weather-stripping, plastic assemblies.
Please note:
siZe
tYPe
Part no
PriCe
Chemicals, aerosols, oils,
16 oz
Aerosol
SPR-S00206
5.60
grease etc. cannot be
shipped by air. All shipments
of these products must deliver
by Ground Service Only.
H-34
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
L ubricants & P enetrants
super lube ® multi-Purpose aerosol
Chainmate ®
A multi-purpose lubricant with PTFE is safe to use on
anything that slides, swivels, rolls, or squeaks.
Chain and Wire rope lubricant
(Temperature range from -40° to 450° F). A USDA
Fortified with molybdenum disulfide. Increases the life
listed food grade lubricant, rated H-1 for incidental
of chains and wire ropes. Effective under extreme
food contact. Does not run, evaporate or form gummy
temperature and pressure ranges. Deep penetration
deposits. Outlasts conventional grease by 50-100%.
to the core of wire ropes. Reduces wear caused by
Has excellent adhesion properties. Aerosol container.
friction and corrosion. High adhesion. Use with guards
in place to eliminate costly down time.
siZe
tYPe
Part no
PriCe
11 oz.
Aerosol
SYN056-31110
8.49
siZe
tYPe
Part no
PriCe
11 oz
Aerosol
LPS-02416
17.01
WlD ™ aerosol
Wire line Dressing
Chain and Wire rope lubricant
A highly adhesive, water resistant lubricant containing
extreme Duty synthetic lubricant with moly
rust and corrosion inhibitors that prevent moisture from
Specifically formulated blend of synthetic lubricants and
penetrating wire lines, ropes, cables, and sheave
an organic molybdenum anti-wear additive that penetrates
grooves. Will not run, drip, or be thrown off moving chain.
deep and leaves a tough film that lubricates and protects.
Forms an impervious film which does not attract dust or
Chain and Wire Rope Lube extends the working life of
dirt. Contains molybdenum disulfide (MoS2) and
chains and wire rope and reduces wear caused by
graphite, which reduces friction or wear between stands.
friction and corrosion. Resists water wash-off and
Ideal for use in salt water enviornments. Penetrates to
high-temperature sling-off. Absorbs pin/bushing shock
the core. No heating required. Nonconductive. Long lasting. Prevents
and cushions rollers, pins and bushings. Can be applied
corrosion. Service rated: -25°F (-32°C) to 350°F (175°C). Black in
with guards in place to eliminate costly downtime.
color.
High temperature stability (up to 350° F continuous)
siZe
tYPe
Part no
PriCe
siZe
tYPe
Part no
PriCe
11 oz
Aerosol
JEL-28541
14.62
16 oz
Aerosol
CRC-03050
13.23
Gear, Chain and Cable lubricant
Wrl ™ aerosol
no ozone Depleting Compounds
Wire rope and Chain lubricant
Protects and prolongs the life of gears, chains, wire
Quickly penetrates to the wire rope core or between
rope, and cable. Repels dirt, sand, and dust with
pin and roller bushing for maximum rope and chain
minimum “throw-off” from centrifugal force. Contains
lubrication. Forms a nondrying, nontacky, flexible outer
no ozone depleting compounds.
film. Will not flake, peel, or dry out. Lead-free. USDA
authorized. Prolongs rope and chain life. Stops rust and
corrosion. Service rated -25°F (-32°C) to 350°F (175°C).
Black in color.
siZe
tYPe
Part no
PriCe
siZe
tYPe
Part no
PriCe
12 oz
Aerosol
LCT-81251
12.85
11 oz
Aerosol
JEL-34041
10.34
extreme Duty open Gear & Chain lube
a tough, tacky, solid Film lubricant
Food Grade Chain lubricant
Used for reducing friction and wear. Heavy-duty
Temp range 20°F to 325°F. VOC content 15%. Specific
compound specially prepared to penetrate pores of
gravity .85 -.87. Oily wet film type. Propane/isobutane
metal, with exceptional “stay-put” characteristics.
propellant. Reduces friction and wear, Suitable for use
Provides maximum lubrication and shock protection,
on food processing equipment. NSF H1 standard.
reduces gear noise, lubricates, prevents scoring and
Clear color. Sold per can.
welding of gear teeth. Contains moly and graphite,
resists heat and pressure. Will not wash or wear
because of weather.
siZe
tYPe
Part no
PriCe
siZe
tYPe
Part no
PriCe
16 oz
Aerosol
LPS-06016
21.94
16 oz
Aerosol
CRC-03058
13.46
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-35
L ubricants & P enetrants
Dry moly lube
Dry Film lubricant
Force 842° ®
Specially formulated dry film lubricant incorporating a
Dry moly lubricant
concentrated dispersion of molybdenum disulfide
Fortified with molybdenum disulfide. Provides a quick
(Subscript MoS2). Moly Lube lowers friction, prevents
drying, thin film. For assembly and break-in lubrication.
galling and helps to reduce torque and energy
Works under high temperatures up to 842° F (450° C)
consumption. High anti-friction and anti-seizure
and pressures - 100,000 psi (6890 Bars). Resists dust
properties. Lubricant resists high temperatures, high
and dirt. Prevents seizure of parts. High adhesion.
pressure, water and chemical attack. Fast drying film
Water and chemical resistant.
resists dirt and dust build-up.
siZe
tYPe
Part no
PriCe
siZe
tYPe
Part no
PriCe
11 oz
Aerosol
LPS-02516
22.90
16 oz
Aerosol
CRC-03084
11.05
Dry PtFe lube
Gear Guard ™
Dry Film lubricant
aerosol
industrial strength
Premium open Gear lubricant
A multi-purpose, micro-thin film containing PTFE, the
Specially formulated extreme-pressure lubricant
advanced dry film lubricant technology from DuPont.
containing molybdenum disulfide (MoS2) and graphite.
Penetrates and bonds to most surfaces including metal,
It produces a thin, tough, durable, and flexible film which
wood, rubber, plastic and glass. It forms a micro-thin film
extends gear life, reduces wear, does not sling off, and
that prevents sticking, reducing friction and wear.
is unsurpassed in its ability to withstand the effects of
NSF H2 registered for use in meat and poultry plants.
high pressure and shock loads. Used to lubricate all
Resists dirt and dust build-up. Seals out moisture and
kinds of open gears, heavily loaded bushings, bearings,
provides a barrier film that inhibits corrosion. Wide temperature
fifth wheels, and other equipment. Black color.
range (-40°F to 450°F). Ultra low coefficient of friction.
All weather formula. EPA safe disposal. Quick drying.
Service rated: -25°F (-32°C) to 350°F (175°C).
siZe
tYPe
Part no
PriCe
16 oz
Aerosol
CRC-03044
9.84
siZe
tYPe
Part no
PriCe
11 oz
Aerosol
JEL-17941
12.04
Dry Graphite lube
lubricant
electrical Grade
Ideal where a dry lubricant is required or where
silicone lubricant
petroleum products must be avoided. Adheres
Dry Film silicone lubricant
with minimum pre-treatment. Effective up to 850°F
constant and 1000°F intermittent. Excellent conductivity.
Multi-purpose formula lubricates, waterproofs and
Dries rapidly at room temperature. Coefficient of friction
protects with a thin, clear, non-staining film. Superior
0.123. Uses: Pre-assembly lubrication of moving parts,
lubricity for metal and non-metal surfaces. Non-hardening
mechanisms of vending machines and parking meters,
lubricant minimizes corrosion. Wide effective temperature
automotive and industrial gaskets, bearings, locks,
range (-40°F to 400°F). Low surface tension permits
springs, hinges, mating surfaces on machines, CRTs,
better coverage and deeper penetration. Meets FDA
plating non-conductors, curing ovens.
regulation 21 CFR 178.3570 for incidental food contact.
siZe
tYPe
Part no
PriCe
siZe
tYPe
Part no
PriCe
16 oz
Aerosol
SPR-S00204
6.38
16 oz
Aerosol
CRC-02094
8.61
We are
your #1
single-source
supplier
H-36
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
L ubricants & P enetrants
Di-electric Grease
Viperlube ™
non-Curing silicone lubricating Compound
10W lightweight oil
Unique, non-curing silicone compound used for
high Performance synthetic
electrical sealing, lubricating, protecting and insulating.
lubricant
Di-Electric Grease waterproofs electrical connections
10W oil reduces varnish and deposits,
and components to protect against arcing due to
minimizing the need for replacement parts
moisture and other contaminants. Improves electrical
and maintenance. Recommended for use
performance during adverse conditions such as rain,
on hydraulic systems, rotary screw
fog, salt spray and temperature extremes. Meets FDA
compressors, food processing machinery,
regulation 21 CFR 175.300 (release agent) and 21 CFR
bearings, chains, and valves.
178.3570 (lubricant, incidental food contact).
NSF H1 rated for incidental food contact.
Excellent lubricant for rubber and plastic parts.
siZe
temP ranGe
Part no
PriCe
siZe
tYPe
Part no
PriCe
1 gal
180°F, 82°C
LCT-36788
69.28
16 oz
Aerosol
CRC-03082
16.44
hydraulic Jack oil
White lithium Grease
non-Corrosive
industrial Grade
Non-corrosive oil improves lubrication in all
High-purity, high-quality NLGI Grade 2 white
types of hydraulic units (except hydraulic
lithium-based aerosol grease that provides superior
brakes). Contains antioxidant, anti-rust,
lubrication and durability in any weather or temperature.
and anti-wear additives.
Excellent as a break-in lubricant for bearings, and for
general purpose lubrication and corrosion protection of
machinery, tools, and equipment. Excellent heat and
water resistance. Rust and oxidation inhibitors for
superior metal protection. Smooth, buttery consistency
siZe
tYPe
temP ranGe
Part no
PriCe
provides optimum surface coverage. Produces a tough, high viscosity
1 gal
Can
120°F, 48°C
LCT-30523
25.51
film. White color allows for easy visual inspection of film coverage.
siZe
tYPe
Part no
PriCe
16 oz
Aerosol
CRC-03080
10.24
air tool oil
lubricates & Protects
Lubricates and protects pneumatic equipment.
Increases torque. Assures long tool life.
Reduces rust, varnish, sludge and acids.
White lithium multi-Purpose
White Grease
Rapidly forms into a pure white grease that will
not melt or wash away. PTFE additives for superior
lubrication. NLGI grade 2. Provides maximum
lubrication. Rust and oxidation inhibitors protect
siZe
tYPe
Part no
PriCe
metal. Pure white color allows easy visual inspection.
15 oz
Bottle
CRC-SL2531
6.68
1 gal
Bottle
CRC-SL2533
27.88
Heat and water resistant.
siZe
tYPe
Part no
PriCe
10 oz (Net Fill)
Aerosol
LPS-03816
13.53
Please note:
We’re just a click away
Chemicals, aerosols, oils,
grease etc. cannot be
shipped by air. All shipments
Order online
of these products must deliver
by Ground Service Only.
www.jpgsupplies.com
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-37
L ubricants & P enetrants
lube tube
air tool lubricant
manually applied lubricant
high Grade 10 Weight lubricant
stick
Specially formulated high grade 10 weight
Extreme pressure lubricant. Prevents the build-up of frictional heat
lubricant, which prolongs the service life of air
on metal surfaces. Designed to be applied to band saw blades and
tools. Additionally it rustproofs, while removing
other cutting tools. Improves overall tool life and productivity when
moisture as it lubricates.
sawing, drilling, milling, grinding, threading or tapping. Can be used
on ferrous and non-ferrous metals, aluminum gates and risers,
plates and extrusions. Biodegradeable, non-toxic and non-staining.
Sold per piece.
siZe
Part no
PriCe
4 oz
COI-ATL004
4.09
16 oz (1 Pt)
COI-ATL016
6.81
siZe
tYPe
Part no
PriCe
32 oz (1 Qt)
COI-ATL032-P12
9.78
14-1/2 oz
Wax Stick
LNX-68020
8.68
128 oz (1 Gal)
COI-ATL128
32.58
robot Grease
super lube ®
With tackiness additive
synthetic air tool lubricant
Tackiness additive so it stays where it is applied. A
Absorbs water, eliminating ice buildup, frost in air
Synthetic thickener makes this product ashless. A very
tools so that they can be used in temperatures
compatible product that can be used to replace sodium
as low as -40° F.
and lithium greases. Meets GMG Robotics LG-01-02
specification. NLGI Grade #2.
Temperature range -18° to 175°or 0° F to 347° F.
siZe
tYPe
Part no
PriCe
siZe
temP ranGe
Part no
PriCe
4 oz
Bottle
SYN056-12004
5.97
14-1/2 oz
0° to 347°F
DRI-DSL330
37.20
16 oz
Bottle
SYN056-12016
10.95
32 oz
Bottle
SYN056-12032
20.15
1 gal
Can
SYN056-12040
69.66
202 moly-lith ™ Grease
multipurpose Grease with moly
Viperlube ™
Lithium-based grease contains micro-fine molybdenum
high Performance synthetic Grease
disulfide (MoS2) particles to further enhance load
NLGI Grade 2/Severe Duty GC-LB Grease
carrying and low friction characteristics. 202 provides
provides superior protection against equipment
unexcelled protection wherever dirt, dust, high humidity,
exposed to a wide range of operating temperatures
rain, and adverse temperatures are problems. Highly
and environments. Use as a lubricant and protective
adhesive, pumpable, and stable. Excellent for grease
anti-rust film on bearings, machine parts, equipment,
cups, presealed bearings, and chassis lubrication.
or as a release agent on gaskets and seals. NSF H1
Blue/Black in color.
rated for incidental food contact.
siZe
temP ranGe
Part no
PriCe
siZe
tYPe
temP ranGe
Part no
PriCe
14 oz
0° - 300°F
JEL-33050
7.78
1 cc
Tube
400°F, 204°C
LCT-36780
0.88
0.42 oz
Tube
400°F, 204°C
LCT-36784
2.75
400 gm
Can
400°F, 204°C
LCT-36783
21.35
3 oz
Tube
400°F, 204°C
LCT-36781
6.96
10.1 oz
Aerosol
400°F, 204°C
LCT-36786
9.34
14 oz
Cartridge
400°F, 204°C
LCT-36782
13.55
Cb-2 ™ super lith Grease
30 lb
Pail
400°F, 204°C
LCT-37061
372.54
multipurpose lithium Grease
Lithium-based grease offers excellent resistance to the
effects of heat, water, oxidation, and heavy loads. Highly
Please note:
adhesive to metal, has no equal as a multipurpose
Chemicals, aerosols, oils,
grease wherever an exceptionally high quality lubricant
grease etc. cannot be
is required. Excellent as a chassis grease for automobiles,
shipped by air. All shipments
trucks, forklifts, and mobile machinery. Amber in color.
of these products must deliver
by Ground Service Only.
siZe
temP ranGe
Part no
PriCe
14 oz
0°F - 300°F
JEL-31050
5.88
H-38
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
L ubricants & P enetrants
White lithium Grease with PtFe
Premium multipurpose Grease
thermaPlex ®
Lithium based product provides superior lubricity of PTFE.
hi-load bearing Grease
Withstands heavy loads and high speeds while preventing
rust and corrosion. All weather formula. USDA authorized
Excellent load carrying ability. Withstands shock
for use in federally inspected meat and poultry plants.
loading. Reduces wear from vibration. Contains 3%
White in color.
moly. Good corrosion resistance. Excellent anti-wear
properties. Wide operating temperature range.
Reduces maintenance costs. NLGI Grade: 2
siZe
temP ranGe
Part no
PriCe
siZe
temP ranGe
Part no
PriCe
14.1 oz
-22 to 350°F
LPS-70414
10.31
14 oz
0°F - 370°F
JEL-50350
7.11
extreme Pressure Grease
Good For Gears and bearings
thermaPlex ®
Lubricates gears, bearings, and slides up to 450°F (232°C).
hi-temp bearing Grease
NLGI #1 rated. Withstands extremes of pressure, resists
water washout. Maintains pumpability at low temperatures;
Reduces risk of bearing failure at high temperatures.
will not take a hard set after cooling.
Excellent high temperature performance. Resists
carbonization at high temperatures. Extends
relubrication intervals. Very high dropping point of
536 F°. Ensures optimal production rates. Excellent
vibration resistance. Reduces grease consumption.
NLGI Grade: 2
siZe
temP ranGe
Part no
PriCe
14.5 oz
450°F, 232°C
LCT-51242
11.95
siZe
temP ranGe
Part no
PriCe
14.1 oz
-15 to 392°F
LPS-70214
14.59
thermaPlex ®
bio Green™ bearing Grease
thermaPlex ®
LPS® ThermaPlex ® Bio Green™ Bearing Grease is an
multi-Purpose bearing Grease
environmentally friendly alternative to traditional greases
Excellent load carrying properties. Extends
in applications where contamination of the environment
relubrication periods. Prolongs bearing life. Good
is a concern. Sold per pc.
corrosion resistance. Ideal for lubricating all types
of bearings. Reduces grease consumption.
Reduces maintenance costs. NLGI Grade: 2
siZe
temP ranGe
Part no
PriCe
14.1 oz
-10 to 370°F
LPS-70714
14.39
siZe
temP ranGe
Part no
PriCe
5 gal
-10 to 370°F
LPS-70706
555.74
14.1 oz
-22 to 350°F
LPS-70614
8.13
thermaPlex ®
Cs moly Grease
aqua bearing Grease
Bearing grease, calcium sulfonate, tube, cs moly,
Excellent resistance to fresh and salt water. Resists
NLGI grade 2, black, 0°F to 425°F, dropping point 570°F,
water washout. Good adhesion properties. Excellent
four-ball wear (mm) greater than 0.6, timken ok load
corrosion resistance. Significant load carrying ability.
(lbs) 65, dropping point ( °C) 300, mineral oil base,
Reduces wear. Reduces grease consumption. Greater
high load carrying capacity, excellent oxidation stability,
degree of bearing protection. NLGI Grade: 2
corrosion and water resistant, contains moly, for
industrial, mining, marine environments, bridges,
steel mills and construction. Sold per piece.
siZe
temP ranGe
Part no
PriCe
siZe
temP ranGe
Part no
PriCe
14.1 oz
-4 to 302°F
LPS-70514
7.76
14.1 oz
0 to 425°F
LPS-70814
11.19
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-39
L ubricants & P enetrants
n-5000 ™
multipurpose lubricant
high Purity anti-seize
temp range of
nickel based
-20º to 1000ºF
Maximum lubricating and anti-seize
Dry; no oily or greasy residue
properties for Class 1, 2 and 3 power
that attracts dust and dirt. Wide
plant hardware. Temperature resistant to
temperature range, works in hot
2400°F (1315°C). Silver in color.
or cold conditions -20°F to 1000°F.
Contains corrosion inhibitors that prevent rust. No harsh components,
so it is safe on most steel, rubber, plastic and paint.
siZe
tYPe
temP ranGe
Part no
PriCe
8 oz
Brush Top Can
2400°F, 1315°C
LCT-51243
56.12
1 lb
Brush Top Can
2400°F, 1315°C
LCT-51269
84.51
siZe
tYPe
Part no
PriCe
4 fl oz
Plastic Bottle
DRI-DSL201
6.40
5-1/4 oz
Aerosol
DRI-DSL903
7.40
32 oz
Metal Can
DRI-DSL321
17.75
marine Grade
anti-seize
C5-a ®
Fresh and salt Water
Formulated to protect assemblies
Copper based anti-seize
exposed directly or indirectly to fresh
Exclusive formula suspends copper and graphite in
and salt water. Marine grade anti-seize
a high quality grease. Protects metal parts from rust,
works especially well in high humidity
corrosion, galling, and seizing at temperatures to
conditions. It has excellent lubricity,
1800° F (982°C). Tested to MIL-PRF-907-E.
superior water wash-out and water
Copper in color.
spray resistance, and prevents galvanic
corrosion. Protects in temperatures from -29°C to 1315°C
(120°F to 2400°F). Approved by the American Bureau of Shipping.
Black in color.
siZe
tYPe
temP ranGe
Part no
PriCe
siZe
tYPe
temP ranGe
Part no
PriCe
8 oz
Brush Top Can
2400°F, 1315°C
LCT-34395
19.86
4 oz
Brush Top Can
1800°F, 982°C
LCT-51144
10.90
8 oz
Brush Top Can
1800°F, 982°C
LCT-51147
17.11
12 oz
Aerosol
1800°F, 982°C
LCT-51003
23.63
1 lb
Brush Top Can
1800°F, 982°C
LCT-51007
26.84
moly Paste
anti-seize
Very low friction. Lubricates press fits,
heavy Duty
protects during break-in and under high
anti-seize
static loads up to 750°F (400°C). Allows
maximum clamping from available torque.
metal Free
Black in color.
Metal-free. Excellent lubricity. Provides
outstanding lubrication to all metals
including stainless steel, aluminum,
and soft metals up to 2400°F (1315°C).
Black in color.
siZe
tYPe
temP ranGe
Part no
PriCe
8 oz
Brush Top Can
750°F, 400°C
LCT-51048
35.55
siZe
tYPe
temP ranGe
Part no
PriCe
9 oz
Brush Top Can
2400°F, 1315°C
LCT-51605
37.83
Please note:
Chemicals, aerosols, oils,
grease etc. cannot be
even if you don’t see an
shipped by air. All shipments
item you need, we can
of these products must deliver
source it for you.
by Ground Service Only.
H-40
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
L ubricants & P enetrants
silver Grade
550 ®
anti-seize
anti-seize Compound
heavy Duty
molybdenum Disulfide &
Heavy duty, temperature resistant,
Graphite
petroleum-based lubricant compound
fortified with graphite and metallic flake.
Most versatile of the anti-seizes.
Inert, will not evaporate or harden in
Low coefficient of friction makes 550 ®
extreme cold or heat. For use in
a good choice for rough-cut threads
assemblies up to 1600°F (871°C).
made of cast iron, steel and most
Tested to MIL-PRF-907E. Approved by
alloys. Due to the film strength of
the American Bureau of Shipping.
molybdenum disulfide, 550 ® is also
Silver in color
well suited for applications involving extreme shearing action such
as mold release, press fits, and highly loaded slow moving bearings.
siZe
tYPe
temP ranGe
Part no
PriCe
4 oz
Brush Top Can
1600°F, 871°C
LCT-80209
11.13
siZe
tYPe
temP ranGe
Part no
PriCe
1 lb
Brush Top Can
-65°F - 2,400°F
JEL-15504
29.33
White hi-temp
anti-seize
ss-30 ®
metal-Free
anti-seize Compound
A general purpose non-metallic
high temperature
formulation that protects against
Pure metallic copper flake homogenized
high temperature seizing and galling
into a highly conductive, nonmelting,
of mated metal parts, up to 2000°F
nonvolatile viscous carrier. Designed
(1093°C). White in color, it has excellent
for stainless steel applications in high
lubricity and can be used on various
temperature. Excellent for use on studs
metals such as copper, brass, cast iron,
and nuts in jet engines, internal
steel, and all alloys including stainless steel.
combustion engines, and turbines.
SS-30 ® has a flashpoint of 560°F. Copper in color.
siZe
tYPe
temP ranGe
Part no
PriCe
8 oz
Brush Top Can
2000°F, 1093°C
LCT-34517
24.28
siZe
tYPe
temP ranGe
Part no
PriCe
1/4 lb
Brush Top Can
-65°F - 1,800°F
JEL-12555
11.11
nickel
anti-seize
Copper Free
Recommended for stainless steel and
We Have
other metal fittings. For preventing
corrosion, seizing, and galling in harsh,
chemical environments, and temperatures
What You
to 2400°F (1315°C). Approved by the
American Bureau of Shipping.
Silver in color.
Want...
siZe
tYPe
temP ranGe
Part no
PriCe
8 oz
Brush Top Can
2400°F, 1315°C
LCT-77124
27.25
1 lb
Brush Top Can
2400°F, 1315°C
LCT-77164
45.12
When You
Want It.
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-41
M Old R eleases
Dry Mist Silicone Mold Release
Zero Stick
Silicone Mold Release
Paintable Mold Release
Eliminates build up on molds while producing more high
quality parts. You’ll get long lasting lubrication to help you
Zero Stick is a unique, extremely versatile release agent
mold more parts in less time and avoid mold build-up.
that can be used in a wide variety of molding applications.
Non-flammable aerosol. Sold per can.
This food grade release allows parts to be painted, plated,
hot stamped, adhesive bonded, labeled, or otherwise decorated.
SIZE
PART NO
PRICE
Non-flammable aerosol. Sold per can.
12 oz
STN-E202
8.09
SIZE
PART NO
PRICE
12 oz
STN-E342
9.91
Silicone Mold Release
All Citrus Cleaner
Our most popular mold spray for many applications
Mold Cleaner
including injection, compression, transfer, vacuum
form, extrusion, and more. One application provides long
lasting lubrication & multiple part release.
Faster, safer, all natural cleaning. Quickly and easily
Non-flammable aerosol. Sold per can.
removes silicones, grease, oil, tar, and more. Evaporates
fast and leaves no residue. Fragrant orange scent.
SIZE
PART NO
PRICE
Contains no methylene chloride, trichloroethane, or trichloroethylene.
12 oz
STN-E206
7.53
C-1 USDA approval rating. Contains no Class I (CFC) or Class II
(HCFC) ozone depleting substances. Sold per can.
SIZE
PART NO
PRICE
12 oz
STN-A500
9.25
Urethane Mold Release
Silicone Mold Release
Formulated specifically for urethanes. Saves you
Non-Flammable Cleaner Degreaser
time by yielding fast, easy part removal and multiple
Mold Cleaner
releases per application. Non-flammable aerosol.
Sold per can.
Preferred for high temperature cleaning applications.
SIZE
PART NO
PRICE
Removes heavy, stubborn grime in less time, for less
12 oz
STN-E236
11.01
money, with less elbow grease. Evaporates fast and
leaves no residue. Contains no Class I (CFC) or Class II (HCFC)
ozone depleting substances. Sold per can.
SIZE
PART NO
PRICE
12 oz
STN-A496
6.46
Rocket Release
Paintable Mold Release
PLEASE NOTE:
Part painters rejoice! Now, with our most paintable
Chemicals, aerosols, oils,
release agent, you can paint, hot stamp, label, bond
grease etc. cannot be
and decorate more parts in less time. Get better coating
adhesion, longer lasting lubrication, and fast, easy part removal.
shipped by air. All shipments
Non-flammable aerosol. Sold per can.
of these products must deliver
by Ground Service Only.
SIZE
PART NO
PRICE
12 oz
STN-E302
7.53
H-42
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
P aint & R emOveRs
C740 system Dtm Gallons
alKYD enamel
interior / exterior industrial
A multi-purpose direct-to-metal coating
maintenance Paint
that provides everyday and heavy-duty
industrial maintenance
rust protection in mild to moderate
commercial environments. Ready-to-use
The most asked-for spray paint in the industrial
with no measuring or mixing. Applies
marketplace. Superior performance, both indoors and
direct-to-metal for an easy to maintain
outdoors. VOC-compliant acrylic lacquer formula, free
high gloss surface. Durable formula with
of lead hazards. Hard, protective, durable finish. High
excellent coverage and hide. Brush, roller
amount of solids assures maximum coverage with
or spray-application. Resists chipping, cracking and peeling. For
excellent adhesion. Dries fast; in just 12 minutes to the touch.
everyday commercial applications like metal trim, doors, structural
Tough, high-gloss finish. Uniform coverage. No recoat window, recoat
steel, handrails, fixtures, fire escapes, vents, fences, hydrants,
anytime. Uses: Any metal or wood surface, including motors, tools,
cabinets, channels and more.
pipelines, conduit, ducts, drums, cabinets, furniture, and for color
coding steel and lumber.
siZe
Color
Part no
PriCe
1 gal
Gloss Black
RST-255554
41.97
siZe
Color
Part no
PriCe
1 gal
Gloss White
RST-255558
41.97
16 oz
Gloss White
KRY-K01501A00
6.49
1 gal
Gloss Navy Gray
RST-255556
41.97
16 oz
Flat White
KRY-K01502A00
6.49
1 gal
Gloss Safety Yellow
RST-255550
48.94
16 oz
Almond
KRY-K01506A00
6.49
1 gal
Gloss Safety Red
RST-255551
48.94
16 oz
Semi-Gloss White
KRY-K01508A00
6.49
16 oz
Gloss Black
KRY-K01601A00
6.49
16 oz
Ultra-Flat Black
KRY-K01602A00
6.49
16 oz
Shadow Gray
KRY-K01604A00
6.49
16 oz
Stone Gray
KRY-K01605A00
6.49
16 oz
Pewter Gray
KRY-K01606A11
6.49
industrial Choice ®
16 oz
Smoke Gray
KRY-K01608A00
6.49
1600 system enamel
16 oz
Semi-Flat Black
KRY-K01613A00
6.49
16 oz
Sun Yellow
KRY-K01806A00
6.49
aerosol enamel
16 oz
Regal Blue
KRY-K01901A00
6.49
A multi-purpose spray paint developed for everyday
16 oz
True Blue (OSHA Safety Blue)
KRY-K01910A00
6.49
16 oz
Purple
KRY-K01913A00
6.49
industrial maintenance applications. Ultra-coverage
16 oz
Hunter Green
KRY-K02001A00
6.49
formula provides up to two times the coverage of
16 oz
Emerald Green
KRY-K02016
6.49
competitive brands. New 360° any angle spray allows
16 oz
Cherry Red
KRY-K02101A00
6.49
you to spray in any direction. New comfort tip reduces
16 oz
Pumpkin Orange
KRY-K02411
4.61
finger fatigue. Dries to touch in only 12 minutes.
16 oz
Khaki
KRY-K02504
6.49
Protects against chipping, fading and peeling. High solids
formula delivers complete, even coverage. Protects against
chipping, cracking and peeling. Can be used on surfaces that
reach temperatures up to 200°F.
Fusion For Plastic ™ Paint
siZe
Color
Part no
PriCe
12 oz
Regal Blue
RST-1622830
5.08
the first no-prep, superbond paint for plastic ™
12 oz
Safety Blue
RST-1624830
5.08
Indoor and outdoor use. Dries in 15 minutes or less.
12 oz
Safety Green
RST-1633830
5.08
No sanding or priming required. Uses: Bonds easily for
12 oz
Hunter Green
RST-1638830
5.08
12 oz
Fluorescent Yellow
RST-1642830
5.53
plastic, PVC, hard vinyl, resin and fiberglass.
12 oz
Safety Yellow
RST-1644830
5.08
12 oz
Fluorescent Orange
RST-1654830
5.53
12 oz
Cherry Red
RST-1664830
5.08
12 oz
Ultra-Flat Black
RST-1676830
5.08
12 oz
Semi-Flat Black
RST-1678830
5.08
12 oz
Dove Gray
RST-1684830
5.08
siZe
Color
Part no
PriCe
12 oz
Smoke Gray
RST-1688830
5.08
16 oz
Gloss White
KRY-K02320
7.43
12 oz
Flat White
RST-1690830
5.08
16 oz
Gloss Black
KRY-K02321
7.43
12 oz
Dull Aluminum
RST-1614-830
5.08
16 oz
Hunter Green
KRY-K02324
7.43
12 oz
True Blue
RST-1626-830
5.08
16 oz
Burgundy
KRY-K02325
7.43
12 oz
Fluorescent Green
RST-1632-830
5.53
16 oz
Navy
KRY-K02326
7.43
12 oz
Safety Orange
RST-1653-830
5.08
16 oz
Spring Grass
KRY-K02327
7.43
12 oz
Leather Brown
RST-1674-830
5.08
16 oz
Red Pepper
KRY-K02328
7.43
12 oz
Glossy Black
RST-1679-830
5.08
16 oz
Patriotic Blue
KRY-K02329
7.43
12 oz
Universal Gray
RST-1686-830
5.08
16 oz
Sunbeam
KRY-K02330
7.43
12 oz
Glossy White
RST-1692-830
5.08
16 oz
Sun Dried Tomato
KRY-K02332
7.43
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H43
P aint & R emOveRs
extend ®
line-up ® Pavement
rust treatment
One-step rust treatment goes on white and converts
striping machine
rust to a durable, black, metal-protective coating in 10
18-Gauge all-steel
minutes. Wirebrush parts and apply with brush or spray.
Construction
Surface rust must be present. Use as a primer or finish
Engineered and designed for easy
coat. Resists temperatures to 250°F intermittent, 200°F
operation and durability.18-gauge
continuous. Approved by the American Bureau of
all-steel construction. 12-can storage.
Shipping.
Stripes widths of 2 to 4”. 7 inch
wheels provide a smooth ride on
siZe
tYPe
temP ranGe
Part no
PriCe
hard surfaces, such as concrete,
10-1/2 oz
Aerosol
Up to 250°F, 121°C
LCT-30539
9.21
blacktop and metal.
1 qt
Bottle
Up to 250°F, 121°C
LCT-75430
41.15
Excellent for use in parking lots,
warehouses, plants, factories, etc.
Part no
PriCe
metallic spray
KRY-K08340
145.47
silver
Rust-Oleum metallic spray provides a brilliant metal
finish with weather-resistant metallic flakes. Provides
excellent rust protection for heavily handled objects,
such as autos, bikes, fixtures, door hardware and
line-up ® solvent-based Pavement
more. It features a comfort tip with a wider finger pad
and an any-angle spray feature that allows you to
striping Paint
spray in any direction, even upside-down.
non-Clogging spray tip
Corrosion-resistant.
Fast drying. Long-lasting durability on outdoor pavement
and indoor surfaces. Non-clogging spray tip. VOC
siZe
Color
Part no
PriCe
compliant, free-of-lead hazards. Uses: Warehouse aisles,
11 oz
Metallic
RST-7271-830
7.10
parking lots, school grounds, construction and excavation
sites, road surfaces, nurseries, apartment complexes,
fairgrounds.
siZe
Color
Part no
PriCe
20 oz
Highway White
KRY-K08300
7.28
20 oz
Highway Yellow
KRY-K08301
7.28
bright Zinc-it ® instant Cold Galvanize
20 oz
Handicap Blue
KRY-K08302
7.28
high shine
20 oz
Firelane Red
KRY-K08303
7.28
20 oz
Cover-Up Black
KRY-K08304
7.28
Epoxy-ester based, light duty sacrificial zinc coating that
inhibits corrosion and provides the beauty of a high shine
aluminum finish. Recommended for touch-up and repair
of bright finish, hot-dip galvanized surfaces. Protects base
metal even when scratched or abraded. Fast-drying, dries
Chisel ® Gasket remover
to the touch in 15 minutes.
methylene Chloride
Removes pre-cut conventional gasket cements as
siZe
tYPe
Part no
PriCe
well as formed-in-place chemical gaskets. Removes
16 oz
Aerosol Can
CRC-18414
11.90
silicones, baked-on gaskets, gaskets from aluminum
and small, difficult-to-reach components, weatherstrip
adhesive, dried oil, grease, paint, varnish.
Zinc-it ® instant Cold Galvanize
siZe
tYPe
Part no
PriCe
95% Pure Zinc
18 oz
Aerosol
LCT-79040
19.31
High-performance coating of 95% pure zinc that
electrochemically bonds with ferrous metals to form a
galvanic cell. ZINC-IT is an excellent touch-up for
damaged galvanized coatings. Actively fights rust and
Please note:
corrosion with a film of 95% pure zinc. Protects base
Chemicals, aerosols, oils,
metal even when scratched or abraded. Fast-drying,
grease etc. cannot be shipped
dries to the touch in 15 minutes. Excellent weldability.
by air. All shipments of these
products must deliver by
siZe
tYPe
Part no
PriCe
16 oz
Aerosol Can
CRC-18412
10.33
Ground Service Only.
1 gal
Pail
CRC-18413
242.12
H44
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
P aint & R emOveRs
K1 mineral spirits
Graffiti remover
This exclusive blend of penetrating solvents will
K1 Mineral spirits. Mineral spirits is a slow
quickly restore surfaces marred by graffiti. Beautify
evaporating thinner used predominately in
surfaces by removing unsightly scuff marks and
alkyds. Sold per pc.
graffiti. Safe on many surfaces, this product may
be used in washrooms, on sidewalks, Formica tops,
mirrors and building walls. This graffiti remover
“works magic” on vandalism marred surfaces. The
gel formulation clings to vertical surfaces for
siZe
tYPe
Part no
PriCe
better penetration and removal of embedded graffiti.
1 gal
Can
KRY-K01661600-16
21.43
Left over residue easily flushes away with water. Sold per can.
5 gal
Pail
KRY-K01661600-20
107.00
siZe
tYPe
Part no
PriCe
17 oz
Aerosol
BET055-01523
7.21
remover and Cleaner
Prepares Work surfaces
Remover and cleaner prepares work
surfaces. It has been proven that layout
sCrub ® Graffiti & spray Paint
fluids and stains adhere better to
remover towels
surfaces that are prepared with this
product. Toluene free formula for
Unique cleaning towel combines a high-quality
workers’ safety. Benefits: Prepares
graffiti remover formula with an absorbent, abrasive,
metal surfaces. Dries in minutes. Does
non-scratching towel. Remover loosens and removes
not contain toluene, chlorofluorocarbons
graffiti and spray paint, allowing the towel to absorb
or chlorinated solvents. Unique formulation
and hold residue without re-depositing paint on
dilutes stains for thinner coatings.
surface. Premoistened. Sold per canister.
siZe
tYPe
Part no
PriCe
siZe
tYPe
Color
Part no
PriCe
16 oz
Aerosol
DYK-82038
11.02
10-1/2 x12-1/4”
Pail
Grey/White
DYK-90130
15.33
remover, Cleaner
and thinner
oDC-Free Cleaner
Cleaner / Degreaser
Dries in minutes
Removes grease, oil, lubrication fluids, metal cuttings
Remover, cleaner and thinner prepares
and fines from parts, equipment, and machinery. Use
work surfaces. It has been proven that
as a spray or in immersion cleaning processes, at room
layout fluids and stains adhere better to
temperature or heated. Recommended as a final
surfaces that are prepared with this
pre-assembly cleaning treatment for all surfaces
product. Toluene free formula for
bonded with adhesives.
workers’ safety. Benefits: Prepares
metal surfaces. Dries in minutes.
Does not contain toluene, chlorofluorocarbons or chlorinated solvents.
Unique formulation dilutes stains for thinner coatings.
siZe
tYPe
Part no
PriCe
15 oz
Aerosol
LCT-22355
12.31
16 fl oz
Pump Spray
LCT-20162
12.31
siZe
tYPe
Part no
PriCe
5 gal
Pail
DYK-82838
157.92
non-Chlorinated Parts Cleaner
adhesive remover
leaves no residue
Citrus base
Cleaner for removing oil, grease, and asphalt with no
Effective in removing many partially dried and some
chlorinated solvent run-off. All-purpose metal parts
types of fully cured adhesives without leaving a residue.
cleaner. Ideal for aluminum surfaces.
Quickly cuts through most adhesive films, labels,
grease, grime, tar and oil to clean a variety of surfaces.
siZe
tYPe
Part no
PriCe
siZe
tYPe
Part no
PriCe
14-3/4 oz
Aerosol
LCT-30545
6.06
24 oz
Aerosol
MMM-49048
25.70
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H45
L ayOut F Luids B rush - on A erosol C leAners
Layout Fluid
Toluene Free
EZ ToUCH ® Standard Nozzle
UseDYKEM ® ;layoutfluidstoscribe
Stencil Ink
sharp,clear,preciselines.Ourlayout
Spraysasharp,cleanedgewithoutsmearingor
fluidsprovideauniformdeepcolorthat
smudging.Driesquicklyforpermanentlymarked
preventsglareanddriesinminutes.Adds
surfaces.MeetsMIL-A-A-208B.MatchFed.Std.595
practicallynothicknesstotheworkpiece
colors.Waterproofandweatherresistant.Doesnot
andremainsflexiblewithoutcrackingand
containchlorinatedsolventsorSaraTitleIIIingredients.
chipping.Benefitsreduceseyestrain,
EquippedwithEZTOUCH ® standardnozzle.
toluenefree.
Uses:cartons,corrugatedboxes,fiberdrums,lumber,
woodencrates,steelcoils,metals,paper,fabrics,
plastics,plaster,stone,glass,asphalt,concrete-virtually
SIZE
TYPE
CoLor
ParT No
PrICE
anyporousornon-poroussurface.
2oz FeltTipApplicator BlueDYK-802006.27
2oz FeltTipApplicator Red DYK-802966.27
SIZE
CoLor
ParT No
PrICE
4oz Brush-In-Cap BlueDYK-803007.53
16ozDarkBlueSPR-S03109 5.79
4oz Brush-In-Cap Red DYK-803967.53
16ozYellow SPR-S03127 6.17
8oz Brush-In-Cap BlueDYK-8040010.45
16ozWhite SPR-S03105 5.79
8oz Brush-In-Cap Red DYK-8049610.45
16ozBlack SPR-S03108 5.79
16oz AerosolBlueDYK-8000012.60
16oz AerosolRed DYK-8009612.60
remover and Cleaner
Fountain Brush and
Prepares Work Surfaces
Bottle
Removerandcleanerprepareswork
surfaces.Ithasbeenproventhat
With Brush
layoutfluidsandstainsadherebetter
DYKEM ® FountainBrushand
tosurfacesthatarepreparedwiththis
Bottleconsistsofasofthair
product.Toluenefreeformulafor
brushwithahollowhandle
workers’safety.Benefits:Prepares
attachedtoasqueezablebulb.
metalsurfaces.Driesinminutes.
Allowsfordelicatetoheavyflow
Doesnotcontaintoluene,
dependingonyourdesired
chlorofluorocarbonsorchlorinated
application.5oznonbreakable
solvents.Uniqueformulation
polyethylenebottle.Useon
dilutesstainsforthinnercoatings.
verticalorhorizontalsurfaces.Capwillnot“freeze”tobottle.Usewith
followingproducts:SteelBlue®.layoutfluids.Stainingcolors.Other
SIZE
TYPE
ParT No
PrICE
solutions.
16ozAerosolDYK-8203811.02
SIZE
TYPE
ParT No
PrICE
5oz BottleDYK-89157 14.16
remover, Cleaner and
Thinner
Dries in Minutes
EZ ToUCH ® FaNSPraY ® Nozzle
Remover,cleanerandthinner
Blue Layout Fluid
preparesworksurfaces.Ithasbeen
Theeconomicalchoiceformostlayoutprojects.
proventhatlayoutfluidsandstains
VOC-compliant.Fast-drying,non-flaking,non-etching,
adherebettertosurfacesthatare
won’tpeel.Heatresistant,non-corrosive.Adheresto
preparedwiththisproduct.Toluene
metalorglass.EquippedwithEZTOUCH ®
freeformulaforworkers’safety.
FANSPRAY ® Nozzle.Uses:Pattern-making,tooland
Benefits:Preparesmetalsurfaces.
diemaking,machining,maintenancemechanicals.
Driesinminutes.Doesnotcontain
toluene,chlorofluorocarbonsorchlorinatedsolvents.
Uniqueformulationdilutesstainsforthinnercoatings.
SIZE
TYPE
CoLor
ParT No
PrICE
SIZE
TYPE
ParT No
PrICE
16oz Aerosol Blue SPR-S00603 5.89
5galPail DYK-82838 157.92
H-46
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
L iquid P aint M arkers
Dykem ® brite-mark ®
Pro Line Paint markers
medium marker / Pen
Valve-actuated tip available in fine
DYKEM ® BRITE-MARK ®
(1/16") and micro (1/32") tip sizes
Medium is a general purpose
for ultimate precision.
marker that writes on almost
High-strength, lightweight barrel
any surface and features a
for industrial use. Xylene-free
medium tip for clear, bold
paint for less odor. Temperature
markings. Its quick drying,
range: -50 to 150°F (-46 to 66°C).
oil-based paint withstands
Ideal for metal, also suitable for
indoor and outdoor conditions,
wood, glass, plastic, rubber, and
including acid and alkaline rain
more.
without fading, chipping or losing its opacity. Benefits: Makes
permanent bright marks on metal, rubber, plastic, glass, concrete,
leather, stone, wood, vinyl and more. Valve action mechanism
TYPE
COLOr
PArT NO
PriCE
Fine
White
MKL-96871
4.63
prevents paint in barrel from drying when cap is left off. Ideal for
Fine
Yellow
MKL-96872
4.63
color coding. Bullet tips are replaceable to assure complete use of
Fine
Black
MKL-96873
4.63
paint in each marker. Drying time: 25 - 35 seconds. (12) per box,
Fine
Red
MKL-96874
4.63
priced per piece.
Fine
Blue
MKL-96875
4.63
Fine
Green
MKL-96876
4.63
Fine
Orange
MKL-96877
4.63
TYPE
COLOr
PArT NO
PriCE
Fine
Pink
MKL-96878
4.63
Medium
Blue
DYK-84001
3.51
Fine
Light Green
MKL-96879
4.63
Medium
Black
DYK-84002
3.51
Micro
White
MKL-96888
4.63
Medium
White
DYK-84003
3.51
Micro
Yellow
MKL-96889
4.63
Medium
Yellow
DYK-84004
3.51
Micro
Black
MKL-96890
4.63
Medium
Orange
DYK-84005
3.51
Micro
Red
MKL-96891
4.63
Medium
Red
DYK-84006
3.51
Medium
Green
DYK-84007
3.51
Medium
Lavender
DYK-84019
3.51
Medium
Gray
DYK-84050
3.51
Medium
Gold
DYK-84051
3.51
Pro Wash ® Paint
markers
Removable, yet marks in real
Pro Line hP markers
paint. Weather resistant paint
washes off quickly with water
high Performance Paint
(Pro Wash ® W) or mild
Permanent liquid paint marker
detergent (Pro Wash ® D)
developed for unsurpassed
Fast drying - 30-60 seconds.
marking performance on greasy
Marks on metal, glass, plastic
and oily non-porous surfaces.
and other non-porous surfaces.
The high-performance formula
1/8" tip size.
penetrates through oil to dry
quickly and provide bold, sharp
TYPE
COLOr
PArT NO
PriCE
marks. Weather, water, and UV
Pro-Wash D
White
MKL-97010
4.67
resistant. Xylene-free formula minimizes health risks. Low chlorides,
Pro-Wash D
Yellow
MKL-97011
4.67
low halogens. Marking range: -50 to 150°F. Medium 1/8" bullet tip.
Pro-Wash D
Red
MKL-97012
4.67
Pro-Wash D
Black
MKL-97013
4.67
Pro-Wash D
Blue
MKL-97015
4.67
TYPE
COLOr
PArT NO
PriCE
Pro-Wash D
Green
MKL-97016
4.67
Medium
White
MKL-96960
4.49
Pro-Wash W
White
MKL-97030
4.67
Medium
Yellow
MKL-96961
4.49
Pro-Wash W
Yellow
MKL-97031
4.67
Medium
Red
MKL-96962
4.49
Pro-Wash W
Red
MKL-97032
4.67
Medium
Black
MKL-96963
4.49
Pro-Wash W
Black
MKL-97033
4.67
Medium
Orange
MKL-96964
4.49
Pro-Wash W
Blue
MKL-97035
4.67
Medium
Blue
MKL-96965
4.49
Pro-Wash W
Green
MKL-97036
4.67
Medium
Green
MKL-96966
4.49
Medium
Silver
MKL-96967
4.49
Medium
Light Green
MKL-96970
4.49
Medium
Gold
MKL-96972
4.49
Medium
Pink
MKL-96973
4.49
PLEASE NOTE:
Medium
Purple
MKL-96974
4.49
Medium
Brown
MKL-96975
4.49
Chemicals, aerosols, oils,
grease etc. cannot be
shipped by air. All shipments
of these products must deliver
by Ground Service Only.
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-47
M arkers L iquid P aint t emPorary S oLid P aint
Dykem ® Texpen ®
riNZ OFF ™ Temporary
medium marker
metal markers
The TEXPEN ® stands out for its
Writes temporarily on non-treated,
distinctive medium oil-based paint
non-painted and non-porous
markings. Its stainless steel-ball
metal surfaces. Marks can be
valve action tip writes through oil,
removed with water or in a water
grease and underwater without
bath and leave no ghosting or
losing legibility or brightness even
bleeding when painted over.
in extreme weather conditions.
Drying time is 45 seconds to
Benefits: Write sharp, defined,
1 minute. Ideal for quality control,
bright marks on any surface
parts assembly, identification, site
including metal, plastic, glass, concrete, rubber and more.
inspection and more. (12) per box, priced per piece.
Ergonomically correct marker that enables you to mark at all angles,
Other colors available.
even upside down. Marker retains its shape. Paint flow is controlled
by the bulb at the end of the barrel. Drying Time: 25 - 35 minutes.
TYPE
COLOr
PArT NO
PriCE
(12) per box, priced per piece.
Metal Marker
Blue
DYK-44105
4.53
Metal Marker
Red
DYK-44106
4.53
TYPE
COLOr
PArT NO
PriCE
Medium
Blue
DYK-16013
4.99
Medium
Red
DYK-16023
4.99
Medium
Black
DYK-16033
4.99
Medium
Green
DYK-16043
4.99
Medium
Yellow
DYK-16063
4.99
b Paintstik ® marker
Medium
White
DYK-16083
4.99
3/8 or 11/16" Diameter
Medium
Orange
DYK-16103
4.99
Marks on any material, surface or
texture. Real paint in stick form.
Weather-resistant, UV-resistant.
Ideal for layout, color coding,
fabrication and identification.
Valve Action ®
Marks through oil and water.
Liquid Paint marker
Marks on smooth, rough, rusty or
medium Tip
dirty surfaces. For use on metal,
wood, plastic, concrete, rubber, glass, cardboard, and paper.
Marks with real paint, dries in
Lead-free, non-toxic. (12) per box, priced per piece.
3 minutes. Nib releases paint as
needed for continuous marking.
Marks on all surfaces including:
SiZE
COLOr
PArT NO
PriCE
3/8 x 4-3/4”
White
MKL-80420
1.08
metal, wood, glass, plastic,
3/8 x 4-3/4
Yellow
MKL-80421
1.08
rubber, cardboard, and paper.
11/16 x 4-3/4
White
MKL-80220
1.22
The fiber nib is replaceable to
11/16 x 4-3/4
Yellow
MKL-80221
1.28
assure complete use of each marker. Durable metal barrel. Meets
11/16 x 4-3/4
Red
MKL-80222
1.33
California VOC Regulations. (12) per box, priced per piece.
11/16 x 4-3/4
Black
MKL-80223
1.33
11/16 x 4-3/4
Orange
MKL-80224
1.33
11/16 x 4-3/4
Blue
MKL-80225
1.33
TYPE
COLOr
PArT NO
PriCE
11/16 x 4-3/4
Green
MKL-80226
1.33
Medium
White
MKL-96820
4.45
11/16 x 4-3/4
Pink
MKL-80227
1.33
Medium
Yellow
MKL-96821
4.45
11/16 x 4-3/4
Purple
MKL-80228
1.33
Medium
Red
MKL-96822
4.45
11/16 x 4-3/4
Brown
MKL-80229
1.33
Medium
Black
MKL-96823
4.45
Medium
Orange
MKL-96824
4.45
Medium
Blue
MKL-96825
4.45
Medium
Green
MKL-96826
4.45
Medium
Gold
MKL-96827
4.45
Medium
Aluminum
MKL-96832
4.45
Medium
Lt. Blue
MKL-96835
4.45
CALL uS...
for
PLEASE NOTE:
more details
Chemicals, aerosols, oils,
grease etc. cannot be
or product
shipped by air. All shipments
specifications
of these products must deliver
by Ground Service Only.
H-48
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
S oLid P aint m etaL H oLder d urabLe i nk M arkers
E Paintstik ® marker
#101 marker holder
For high Visibility marks
metal 11/16” Dia
Real paint in stick form. High
5" metal holder for Paintstik ®
intensity colors. For greater
markers #: B, B-E, BL-W, C, E, N,
visibility in dimly lit areas. For
O-10, P, BL, M, M-10. All-metal
coding, identification, layout and
construction for long worklife.
fabricating work. Long-lasting,
weather-resistant, fade-resistant.
(12) per box, priced per piece.
SiZE
COLOr
PArT NO
PriCE
SiZE
COLOr
PArT NO
PriCE
11/16 x 5"
Black
MKL-85000
14.42
11/16 x 4-3/4"
White
MKL-88620
2.28
11/16 x 4-3/4
Yellow
MKL-88621
2.28
11/16 x 4-3/4
Orange
MKL-88624
2.28
11/16 x 4-3/4
Blue
MKL-88625
2.28
1 x 4-3/4
White
MKL-88640
2.89
O-10 Paintstik ® marker
For heavy Oiled Surfaces
Real paint in stick form. Dries
overnight. For marking heavily
m Paintstik ® marker
oiled cold rolled steel and other
For Annealed and heat
oily surfaces. (12) per box,
Treated Surfaces
priced per piece.
Marks annealed, normalized and
heat treated surfaces. Real paint
in stick form. Marks withstand
annealing and heat treating
operations. For welds, ingots,
SiZE
COLOr
PArT NO
PriCE
castings, forgings, and annealed
11/16 x 4-3/4"
White
MKL-82220
3.66
parts. Will not come off in oil or
water baths. Marks at room temperature.
Withstands 1600°F.
(12) per box, priced per piece.
Dura-ink ® #15
Fiber-Tip marker
SiZE
COLOr
PArT NO
PriCE
Large ink supply for more
11/16 x 4-3/4"
White
MKL-81920
2.29
mileage. Water-resistant,
11/16 x 4-3/4
Yellow
MKL-81921
2.29
fade-resistant, high intensity
11/16 x 4-3/4
Red
MKL-81922
2.29
11/16 x 4-3/4
Black
MKL-81923
2.29
ink.Ideal for fine line marking.
Durable plastic barrel. Use on
cardboard, ceramics, wood,
metal, rubber, and glass.
(12) per box, priced per piece.
m-10 Paintstik ® marker
For Annealed and heat
Treated Surfaces
TYPE
COLOr
PArT NO
PriCE
Fine
Red
MKL-96022
1.20
Marks annealed, normalized and
Fine
Black
MKL-96023
1.20
heat treated surfaces. Real paint
Fine
Blue
MKL-96025
1.20
in stick form. Marks withstand
Fine
Green
MKL-96026
1.20
annealing and heat treating
operations. For welds, ingots,
castings, forgings, and annealed
parts. Will not come off in oil or
water baths. Marks at room temperature.
Need it
Withstands 1800°F.
(12) per box, priced per piece.
in a hurry?
SiZE
COLOr
PArT NO
PriCE
Ask for Priority Shipping.
11/16 x 4-3/4"
White
MKL-82020
2.72
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-49
M arkers d urabLe i nk H ot S urface m etaL H oLder b aLL -t iP L iquid P aint
Dura-ink ®
hT Paintstik ® marker
#25 Fiber-Tip marker
hot Surface
King Size
Real paint in stick form. Bright
Chisel tip makes fine lines or
colors for higher visibility. Marks
broad marks. Extra large ink
very hot coils, billets, slabs, bars,
supply for greater mileage.
ingots, etc. Marks will not run,
Heavy-duty metal barrel. Use on
char, discolor, peel or crack.
cardboard, wood, metal, paper,
Marks are weather and
ceramics, glass, and leather.
fade-resistant. Available in
(12) per box, priced per piece.
regular size. Temperature
marking range: 250° F to 1600° F.
Case qty’s for all items listed is 144,
priced per piece.
TYPE
COLOr
PArT NO
PriCE
Chisel Tip
Red
MKL-96222
2.81
Chisel Tip
Black
MKL-96223
2.81
SiZE
COLOr
PArT NO
PriCE
3/4 x 4-5/8"
White
MKL-81210
2.71
3/8 x 4-1/2
White
MKL-81220
1.49
3/8 x 4-1/2
Yellow
MKL-81221
1.62
3/8 x 4-1/2
Red
MKL-81222
1.62
3/8 x 4-1/2
Black
MKL-81223
1.49
Dura-ink ®
3/8 x 4-1/2
Blue
MKL-81225
1.62
3/8 x 4-1/2
Green
MKL-81226
2.50
#80 Fiber-Tip marker
Valve-Actuated / bullet Tip
Large ink supply for increased
marking mileage. Smear-resis-
tant, water-resistant, fast-drying.
#111 Extra-Long
Tough, durable tip marks on all
marker holder
surfaces, including: metal, wood,
11/16" Dia with
cardboard, glass, paper, etc.
Push button Design
Metal barrel. Rounded tip.
Valve tip actuated releases ink
11" push-button metal holder for
on demand for smooth continuous use.
hot surface markers #: H, H-T,
(12) per box, priced per piece.
HT-34, HT-40, J, X-5 Paintstik ®
markers. All-metal construction
for long worklife.
TYPE
COLOr
PArT NO
PriCE
Valve-Actuated
Black
MKL-96923
3.67
TYPE
COLOr
PArT NO
PriCE
Holder
Black
MKL-85700
44.95
hot Surface
h Paintstik ® marker
Weather and Fade resistant
Liquid ball Paint marker ®
Real paint in stick form. Bright
metal ball Tip
colors for higher visibility.
Marks with real paint, dries in 5 minutes.
Marks hot coils, billets, slabs,
Durable metal ball tip marks on smooth
bars, ingots, etc. Marks will not
or rough surfaces. Marks on metal,
run, char, discolor, peel or crack.
wood, plastic, glass, any hard surface.
Marks are long-lasting,
Lead-free, non-toxic. Marks are weather
weather- and fade-resistant.
and fade-resistant. Unbreakable plastic
Temperature marking range: 150° F to 1200° F.
bottle with 1/8" steel ball tip. (12) per box,
Case qty’s for all listed items is 144, priced per piece.
priced per piece.
SiZE
COLOr
PArT NO
PriCE
TYPE
COLOr
PArT NO
PriCE
3/8 x 4-5/8"
White
MKL-81020
1.51
Metal Ball
White
MKL-84620
7.37
3/8 x 4-5/8
Yellow
MKL-81021
1.55
Metal Ball
Yellow
MKL-84621
7.37
3/8 x 4-5/8
Red
MKL-81022
1.55
Metal Ball
Red
MKL-84622
7.37
3/8 x 4-5/8
Black
MKL-81023
1.51
Metal Ball
Black
MKL-84623
7.37
3/8 x 4-5/8
Blue
MKL-81025
1.55
Metal Ball
Orange
MKL-84624
7.37
3/8 x 4-5/8
Green
MKL-81026
1.55
Metal Ball
Blue
MKL-84625
7.37
3/8 x 4-5/8
Brown
MKL-81029
1.55
Metal Ball
Green
MKL-84626
7.37
H-50
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
L umber c rayon c Hina r aiLroad c HaLk M arkers
Lumber Crayon
China marker
#512
Paper Wrapped marker
Also known as layout chalk or “keel”. Clay-based
For writing on glass, plastic,
formula provides longer marking mileage.
metal, wood and china. Moisture
Makes weather-resistant, water-resistant
resistant. Smooth writing. High
marks. Lead-free. Marks on concrete,
visibility colors. Non-toxic
wood, metal, plastic, rubber, paper,
pigments. Marks on porous
cardboard, and ceramics. (12) per box,
and non-porous surfaces.
priced per piece.
(12) per box, priced per piece.
SiZE
COLOr
PArT NO
PriCE
1/2 x 4-5/8"
White
MKL-80320
1.11
1/2 x 4-5/8
Yellow
MKL-80321
1.11
1/2 x 4-5/8
Red
MKL-80322
1.11
TYPE
COLOr
PArT NO
PriCE
1/2 x 4-5/8
Black
MKL-80323
1.11
China Marker
White
MKL-96010
0.98
1/2 x 4-5/8
Orange
MKL-80324
1.11
China Marker
Yellow
MKL-96011
0.98
1/2 x 4-5/8
Blue
MKL-80325
1.11
China Marker
Red
MKL-96012
0.98
1/2 x 4-5/8
Green
MKL-80326
1.11
China Marker
Black
MKL-96013
0.98
1/2 x 4-5/8
Purple
MKL-80328
1.11
China Marker
Crimson
MKL-96014
0.98
China Marker
Blue
MKL-96015
0.98
China Marker
Green
MKL-96016
0.98
railroad Chalk
1 x 4"
PLEASE NOTE:
Ideal for making temporary marks on most
Chemicals, aerosols, oils,
surfaces. Marks on metal, wood, concrete,
cardboard, rubber, plastic, plus much more.
grease etc. cannot be
The easy-to-hold 1 x 4" tapered shape makes
shipped by air. All shipments
broad, easy-to-read marks. (144) per box, priced per piece.
of these products must deliver
SiZE
COLOr
PArT NO
PriCE
by Ground Service Only.
1 x 4"
White
MKL-80500
0.33
1 x 4
Red
MKL-80502
0.33
1 x 4
Blue
MKL-80505
0.33
1 x 4
Green
MKL-80506
0.33
JPGSupplies
Your # 1
Source
for Markers.
Call us if you can’t find
what you need.
(513) 604-8338
www.jpgsupplies.com
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-51
T hreadlOckers
7452 ™ Tak Pak ®
222 ™ Threadlocker
Surface Preparation Accelerator
Low Strength / Small Screw
This accelerator, with aggressive cleaning
Low strength threadlocker. Designed for small
properties, promotes the cure speed of all
screws under 1/4".
Loctite® cyanoacrylate adhesives.
SIZE
TYPE
TEMP rANGE
CoLor
PArT No
PrICE
SIZE
TYPE
CoLor
PArT No
PrICE
10 ml
Bottle
-65 to 300°F
Purple
LCT-21463
15.63
1-3/4 fl oz
Spray Can Bottle
Clear / Amber
LCT-18580
10.32
50 ml
Bottle
-65 to 300
Purple
LCT-21464
44.51
770 ™ PrISM ®
242 ® Liquid Threadlocker
Surface Preparation Primer
Medium Strength
An adhesion promoter formulated for use with
A general purpose, removable threadlocker for
polyolefins and other low energy surfaces. Use with
fasteners between 1/4 and 3/4" (6 to 20mm)
Loctite ® cyanoacrylate adhesives. Fast dry time and
diameters. Controlled lubricity for accurate clamp
long on part life.
loads. Parts can be separated using hand tools.
MIL-S-46163A for exisiting design, ASTM D-5363
new designs, NSF/A
SIZE
TYPE
TEMP rANGE
CoLor
PArT No
PrICE
SIZE
TYPE
CoLor
PArT No
PrICE
10 ml
Bottle
-65 to 300°F
Blue
LCT-24221
16.63
1-3/4 fl oz
Bottle
Colorless
LCT-18396
17.47
50 ml
Bottle
-65 to 300
Blue
LCT-24231
46.24
16 fl oz
Can
Colorless
LCT-18397
90.41
250 ml
Bottle
-65 to 300
Blue
LCT-24241
160.64
712 ™ Accelerator
243 ™ Blue Threadlocker
Surface Preperation
Loctite ® 243 ™ primerless medium strength
A solvent based accelerator designed to speed the cure
blue threadlocker is designed for the locking
of Loctite ® cyanoacrylate adhesives.
and sealing of threaded fasteners between
1/4 and 3/4" (6 to 20mm), which require
normal disassembly with standard hand tools.
The product cures when confined in the
absence of air between close fitting metal
SIZE
TYPE
CoLor
PArT No
PrICE
surfaces and prevents loosening and leakage
1-3/4 fl oz
Bottle
Clear / Amber
LCT-20352
11.44
from shock and vibration. The thixotropic nature of Loctite ® 243
reduces the migration of liquid product after application to the
substrate. Loctite ® 243 provides robust curing performance. It not only
works on active metals (e.g. brass, copper) but also on passive
substrates such as stainless steel and plated surfaces. The product
7649 ™ Primer N ™
offers high temperature performance and oil tolerance. It tolerates
Surface Preparation
minor surface contaminations from various oils, such as cutting,
lubrication, anti-corrosion and protection fluids.
A solvent-based primer that features very long on-part
life. Use to speed the cure of all Loctite ® anaerobic
products and ensure proper cure on inactive metals.
SIZE
TYPE
PArT No
PrICE
Ideal for cure conditions below room temperature.
10 ml
Bottle
LCT-1329837
16.01
50 ml
Bottle
LCT-1329467
44.51
250 ml
Bottle
LCT-1329505
154.62
SIZE
TYPE
CoLor
PArT No
PrICE
25 gm
Aerosol
Clear / Green
LCT-21347
13.08
1-3/4 fl oz
Glass Bottle
Clear / Green
LCT-19269
19.04
4-1/2 oz
Aerosol
Clear / Green
LCT-21348
29.61
Ask about Loctite
product training programs
H-52
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
T hreadlOckers
262 ™ Liquid Threadlocker
290 Liquid Threadlocker
Medium to High Strength
Wicking Grade
A permanent threadlocker for fasteners up to 3/4"
A medium strength threadlocker for pre-assembled
(20 mm) diameter. High lubrication for easy
bolts up to 1/2" (12mm). Penetrates threads by
assembly. Excellent for preventing rust and
capillary action. Secures set screws and other
corrosion in extreme chemical/environmental
assemblies after settings are completed. Seals
conditions. MIL-S-4613A in exisiting designs,
welds and porous metal parts. Protects threads
ASTM-D-5363 for new designs
from rust and corrosion.
SIZE
TYPE
TEMP rANGE
CoLor
PArT No
PrICE
SIZE
TYPE
TEMP rANGE
CoLor
PArT No
PrICE
10 ml
Bottle
-65 to 300°F
Red
LCT-26221
16.63
10 ml
Bottle
-65 to 300°F
Green
LCT-29021
16.01
50 ml
Bottle
-65 to 300
Red
LCT-26231
46.24
50 ml
Bottle
-65 to 300
Green
LCT-29031
44.51
250 ml
Bottle
-65 to 300
Red
LCT-26241
160.64
250 ml
Bottle
-65 to 300
Green
LCT-29041
154.62
263 ™ High Strength red Threadlocker
QuickTape ™ 249 ™
Loctite ® 263 ™ primerless high strength
Blue Threadlocker
red threadlocker is designed for the permanent locking
Loctite ® QuickTape ® 249 ™ blue threadlocker, the
and sealing of threaded fasteners. The product cures
first threadlocker in tape form. This medium strength,
when confined in the absence of air between close
general purpose threadlocker adhesive is designed
fitting metal surfaces and prevents loosening and
for the locking and sealing of threaded fasteners
leakage from shock and vibration. Loctite 263 is
which require normal disassembly with standard hand
particularly suited for heavy duty applications such as
tools. The product cures when confined in the
studs into motor housings, nuts onto studs in pump
absence of air between close fitting metal surfaces
housings and other fasteners where high strength is required.
and prevents loosening and leakage from shock and vibration.
Loctite 263 provides robust curing performance. It not only works on
Sold per roll.
active metals (e.g. brass, copper) but also on passive substrates
such as stainless steel and plated surfaces. The product offers high
temperature performance and oil tolerance. It tolerates minor surface
SIZE
TYPE
PArT No
PrICE
contaminations from various oils, such as cutting, lubrication,
260"
Tape
LCT-1372603
22.65
anti-corrosion and protection fluids.
SIZE
TYPE
PArT No
PrICE
10 ml
Bottle
LCT-1330583
16.01
Assure ™ 425 ™
50 ml
Bottle
LCT-1330585
44.51
250 ml
Bottle
LCT-1330335
154.62
Surface Curing Threadlocker
Low strength, fast curing threadlocker for plastic
fasteners. Can be applied before or after assembly.
272 Liquid Threadlocker
High Strength / High Temperature
Withstands temperatures to 450°F. Provides a
SIZE
TYPE
TEMP rANGE
CoLor
PArT No
PrICE
fast cure on most surfaces including “as received”
20 gm
Bottle
-65 to 180°F
Blue
LCT-42540
24.68
fasteners. Recommended for bolts up to 1-1/2"
(36mm) in diameter. Heat and hand tools are
required for disassembly. Approved by CFIA.
SIZE
TYPE
TEMP rANGE
CoLor
PArT No
PrICE
Form-A-Thread ® Stripped
50 ml
Bottle
-65 to 450°F
Red
LCT-27240
44.51
Thread repair Kit
Stripped Thread repair Kit
Permanently repairs stripped threads and
fasteners in five minutes (up to SAE Grade 5
PLEASE NoTE:
English and 8.8 metric). Allows up to 1,538 in
Chemicals, aerosols, oils,
lbs torque on 1" bolt, and 300°F. Resists most
shop fluids. CFIA approved.
grease etc. cannot be
shipped by air. All shipments
SIZE
TYPE
TEMP rANGE
PArT No
PrICE
of these products must deliver
4.8 ml
Kit
300°F Max.
LCT-28654
21.95
by Ground Service Only.
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-53
T hreadlOckers
545 ™ Liquid Thread
Head Bolt & Water Jacket Sealant
Hydraulic / Pneumatic Sealant
Low strength sealant lubricates and seals threaded
A liquid sealant for locking and sealing high pressure,
fasteners. Ideally suited for bolts that penetrate through
fluid power systems with tapered fittings. Contains no
water jackets.
fillers and will not foul valves or fluid filtering systems.
Approved by the American Bureau of Shipping and
CFIA.
SIZE
TYPE
TEMP rANGE
CoLor
PArT No
PrICE
SIZE
TYPE
PArT No
PrICE
10 ml
Bottle
-65 to 300°F
Purple
LCT-32429
13.99
50 ml
Tube
LCT-1158514
24.32
50 ml
Bottle
-65 to 300
Purple
LCT-54531
44.31
565 ™ PST ® Thread Sealant
Thread Sealant for oxygen Compatible
Controlled Strength
Systems
A general purpose instant sealant for tapered and
For sealing threads in systems carrying oxygen. For use
straight/tapered fittings. Controlled strength for ease of
up to 30 bar (435 psi) at 140°F (60°C).
disassembly. UL classified for US, ULC for Canada,
NSF/ANSI-61 certified, CFIA approved, and CSA
International.
SIZE
TYPE
TEMP rANGE
CoLor
PArT No
PrICE
SIZE
TYPE
PArT No
PrICE
50 ml
Tube
-65 to 300°F
White
LCT-56531
19.93
50 ml
Tube
LCT-1265761
30.89
250 ml
Tube
-65 to 300
White
LCT-56541
64.47
Fast Cure 5452 ™
567 ™ PST ® Thread Sealant
Seal and secure used or new metal pipes and fittings by
High Temperature
filling the air space between the threads. Contains no
Withstands temperatures to 400°F with excellent
fillers or particles that could contaminate system fluids,
solvent resistance. Locks and seals tapered pipe
foul valves, or clog fine filters or screens. Locks fittings
threads and fittings, including high pressure
from vibrational loosening, while controlled strength
applications. Disassembles with hand tools. Agency
assures easy disassembly. Immediate low pressure
approvals include CSA International, UL (US &
sealing. Fast cure speed, on average 4 times faster than
Canada), American Bureau of Shipping and CFIA.
traditional anaerobic sealants. Gel formula, well suited for
any size NPT, O-ring boss (ORB) or JIC fittings, even large fittings,
gaps or threads. Seals mating surfaces of flare style fittings, filling
scratches and surface imperfections. Works well with dry seal fittings,
SIZE
TYPE
TEMP rANGE
CoLor
PArT No
PrICE
such as ORB style connectors to prevent rotation that ultimately
6 ml
Tube
-65 to 400°F
White
LCT-56707
6.42
50 ml
Tube
-65 to 400
White
LCT-56747
23.16
leads to leakage. Primerless formula cures quickly even on stainless
250 ml
Tube
-65 to 400
White
LCT-56765
78.84
or inert metals.
SIZE
TYPE
PArT No
PrICE
50 ml
Tube
LCT-1265769
46.51
250 ml
Tube
LCT-1265770
162.35
592 ™ PST ® Liquid Thread
Slow Cure Sealant
Locks and seals threaded fittings. Parts may be
PLEASE NoTE:
repositioned up to 24 hours after application.
Chemicals, aerosols, oils,
grease etc. cannot be
shipped by air. All shipments
of these products must deliver
SIZE
TYPE
TEMP rANGE
CoLor
PArT No
PrICE
by Ground Service Only.
50 ml
Tube
-65 to 400°F
White
LCT-59231
19.93
250 ml
Tube
-65 to 400
White
LCT-59241
64.47
H-54
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
G asketinG & s ealinG
urethane sealant
Outstanding adhesion
Dap ® Kwik-seal ®
Single component, gun-grade caulk that bonds, seals, and
tub and tile adhesive Caulk
waterproofs up to 180°F. Outstanding adhesion properties
Tub and tile adhesive and caulk in one! Mildew resistant.
to concrete, masonry, glass, plastics, wood, aluminum, and
Excellent adhesion and flexibility. Tools easily and dries tack
most other metals. CFIA approved.
free in 15 minutes. Water clean-up.
siZe
tYPe
temP ranGe
COlOr Part nO
PriCe
siZe
tYPe
COlOr
Part nO
PriCe
10.2 oz
Cartridge
180°F Max.
Gray
LCT-39916
14.43
5.5 oz
Tube
White
DAP-18001
3.38
5.5 oz
Tube
Clear
DAP-18008
3.38
5.5 oz
Tube
Almond
DAP-18013
3.38
Dap ® alex Plus ® acrylic latex
Caulk Plus silicone
Daptex ™
Paintable
insulating Foam sealant
Superior quality, moisture and mildew resistant,
Innovative latex polymer foam technology. Fills, seals, and
multi-purpose caulk for interior or exterior use. Highly flexible
insulates cracks, gaps, and voids around windows, doors,
and durable. Paintable. 35 year durability guarantee. Exceeds
pipes, vents, outlets, foundations, crawl spaces. Keeps
ASTM spec. C-834.
heat in and keeps drafts, moisture, and pests out!
Easy-to-use latex foam won’t over-expand and cleans up
with water. Non-clogging applicator. No solvent odors and no messy
siZe
tYPe
COlOr
Part nO
PriCe
clean-up. Indoor/outdoor use. UL approved.
10.1 oz
Cartridge
Slt. Gray
DAP-18118
3.95
10.1 oz
Cartridge
Brown
DAP-18120
3.95
10.1 oz
Cartridge
Cdr Tan
DAP-18122
3.95
siZe
tYPe
COlOr
Part nO
PriCe
10.1 oz
Cartridge
Dk. Bronze
DAP-18124
3.95
12 oz
Aerosol
White
DAP-18826
8.25
10.1 oz
Cartridge
Black
DAP-18126
3.95
10.1 oz
Cartridge
Almond
DAP-18130
3.95
10.1 oz
Cartridge
White
DAP-18152
3.83
10.1 oz
Cartridge
Clear
DAP-18156
4.10
Dow Corning ® silicone
100% silicone sealant
Protect and seal with 100% silicone rubber.
Dap ® alex ® Painter’s acrylic latex Caulk
Waterproof. Flexible. Not paintable. 50 year
durability guarantee.
interior / exterior use
Meets Fed. Spec. TT-S-001534A, Class A.
All-purpose painter’s caulk. Exterior/interior use. Applies
smooth and easy. Adheres to wood, plaster, drywall, and
masonry. Resists cracking and chalking. Paintable. 25 year
siZe
tYPe
COlOr
Part nO
PriCe
durability guarantee.
2.8 oz
Tube
White
DAP-00683
6.40
2.8 oz
Tube
Clear
DAP-00684
6.40
siZe
tYPe
COlOr
Part nO
PriCe
10.1 oz
Cartridge
Clear
DAP-08641
7.23
10.1 oz
Cartridge
White
DAP-18670
2.98
10.1 oz
Cartridge
Black
DAP-08642
7.58
10.1 oz
Cartridge
Aluminum
DAP-08643
7.58
10.1 oz
Cartridge
White
DAP-08646
7.23
10.1 oz
Cartridge
Bronze
DAP-08647
7.58
10.1 oz
Cartridge
Almond
DAP-08649
7.58
Dap ® Kwik Foam ®
insulating sealant
A one component, moisture-cure, polyurethane foam that
expands to economically fill and seal large cavities. Stops
air infiltration and will not degrade or shrink. Kwik Foam ®
contains a flame retardant and meets Montreal Protocol
1987.
siZe
tYPe
COlOr
Part nO
PriCe
12 oz
Aerosol
Tan
DAP-18230
10.85
24 oz
Aerosol
Tan
DAP-18232
18.73
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-55
G asketinG & s ealinG
superflex ® speedseal ™
510 ™ Gasket
A 1-component, fast-dry RTV silicone that withstands water
eliminator ®
contact just 2 hours after application. This 100% silicone
rubber sealant replaces traditional sealants that require a
high temperature Flange sealant
minimum 24 hours prior to water exposure. Resistant to mold
Product has a temperature range to 400°F with excellent
and mildew, this product features a flexible, watertight seal that
solvent and chemical resistance. Makes or dresses
provides a time-saving, back-in-service option. Sold per piece.
gaskets in rigid assemblies. Eliminates gasket
compression set.
siZe
tYPe
COlOr
Part nO
PriCe
300 ml
Cartridge
Clear
LCT-1311327
20.88
300 ml
Cartridge
White
LCT-1312042
20.88
siZe
tYPe
temP ranGe
COlOr
Part nO
PriCe
50 ml
Tube
-65 to 400°F
Red
LCT-51031
32.93
250 ml
Tube
-65 to 400
Red
LCT-51041
71.59
beats the nail ®
Construction adhesive
515 ™ Gasket
Best all-purpose construction adhesive. Provides a high
eliminator ®
strength heat and water-resistant bond which exceeds
Flange sealant
ASTM C-557-73 specifications. Less bracing and holding
Makes flexible gaskets for rigid machined flanges
required.
with less than .050” gap. Flexes with flanges that
move in service.
siZe
tYPe
COlOr
Part nO
PriCe
10.3 oz
Cartridge
Tan
DAP-25082
4.50
28 oz
Cartridge
Tan
DAP-25084
8.78
siZe
tYPe
temP ranGe
COlOr
Part nO
PriCe
6 ml
Tube
-65 to 400°F
Purple
LCT-51517
6.74
50 ml
Tube
-65 to 300
Purple
LCT-51531
20.89
half-barrel Caulking Gun
1/10 gallon, half-barrel with smooth rod
and quick release mechanism. Holds
518 ™ Gasket eliminator ®
most standard cartridges. Use for light to medium applications of
glazing, sealants, caulks and other cartridge products.
Flange sealant Kit
Forms a flexible, solvent-resistant seal that
Part nO
PriCe
will not tear or decay. Seals to 300°F and fills
RED-3985
2.59
gaps to .050". Can be used on flexible metal
assemblies including aluminum surfaces.
Easy disassembly and cleaning.
NSF/ANSI-61 Certified and CFIA approved.
uni-rail Caulking Gun
siZe
tYPe
temP ranGe
COlOr Part nO
PriCe
25 ml
Syringe
-65 to 300°F
Red
LCT-22423
39.68
1/10 gallon, heavy-duty uni-rail
300 ml
Cartridge
-65 to 300
Red
LCT-22424
104.91
construction with hex piston rod and
quick release lever. Fits all standard cartridges. Use for light to
medium applications.
Part nO
PriCe
RED-3986
4.99
5699 ™ Gray
high Performance
rtV silicone
Please nOte:
Gasket maker
Chemicals, aerosols, oils,
low Odor
Remains flexible and withstands high vibration.
grease etc. cannot be
Designed for high-torque applications. Withstands
shipped by air. All shipments
temperatures from -75 to +625°F (-59 to +329°C). Outstanding oil and
of these products must deliver
shop fluid resistance.
Non-corrosive, low odor. Increased oil resistance.
by Ground Service Only.
siZe
tYPe
temP ranGe
COlOr
Part nO
PriCe
70 ml
Tube
-75 to 625°F
Gray
LCT-18718
14.81
H-56
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
G asketinG & s ealinG
superflex ® red high temp rtV
Gasket sealant 1
silicone adhesive sealant
For rigid assemblies
Cannot be Painted
Reliable, paste-like gasket sealant/dressing/coating.
Makes gaskets that resist temperatures to
Sets quickly to a hard set and is recommended for
600°F (315°C) intermittent. Resists aging,
rigid, permanent assemblies. Use to 400°F. Resistant to
weather, and thermal cycling without shrinking,
gasoline and other solvents. Oil resistant.
cracking, or hardening. Fills gaps to .25". CFIA
Non-corrosive. CFIA approved.
approved.
siZe
tYPe
temP ranGe
COlOr
Part nO
PriCe
siZe
tYPe
temP ranGe
COlOr Part nO
PriCe
1-1/2 oz
Tube
-65 to 400°F
Reddish Brown
LCT-30510
3.87
80 ml
Tube
-75 to 600°F
Red
LCT-59630
9.02
3 oz
Tube
-65 to 400
Reddish Brown
LCT-30511
4.41
300 ml
Cartridge
-75 to 600
Red
LCT-59675
29.56
7 oz
Tube
-65 to 400
Reddish Brown
LCT-30512
11.17
12 oz
Tube
-75 to 600
Red
LCT-82279
28.15
superflex ® rtV silicone adhesive
Gasket sealant 2
sealant
For non-rigid assemblies
black/Clear
Reliable, paste-like gasket sealant/dressing/coating.
General purpose, one-part silicone adhesive
Sets more slowly to a pliable film best suited for non-rigid,
sealant cures at room temperature to form a tough
vibrating assemblies. Use to 400°F. Resistant to gasoline
rubber seal. Will not slump in overhead or vertical
and other solvents. Oil resistant. Non-corrosive.
applications. Formulated to withstand extreme
temperature cycling, U.V. light, and ozone.
Cannot be painted.
siZe
tYPe
temP ranGe
COlOr
Part nO
PriCe
1-1/2 oz
Tube
-65° to 400°F
Black
LCT-30513
4.04
3 oz
Tube
-65° to 400°F
Black
LCT-30514
4.68
siZe
tYPe
temP ranGe
COlOr
Part nO
PriCe
80 ml
Tube
-65 to 450°F
Black
LCT-59330
6.52
300 ml
Cartridge
-65 to 450
Black
LCT-59375
20.88
80 ml
Tube
-65 to 450
Clear
LCT-59530
6.52
300 ml
Cartridge
-65 to 450
Clear
LCT-59575
20.88
587 ™ blue high Performance
rtV silicone Gasket
superflex ® non-Corrosive
high Performance
rtV silicone
Forms tough, flexible gaskets directly on the flange.
Offers excellent adhesion to oily surfaces. Low odor,
Oil resistant
non-corrosive, low volatility. Withstands temperatures
Neutral curing and non-corrosive. For aluminum,
to 500°F (260°C) intermittent. Resistant to most
concrete, and electrical applications. Temperature
chemicals and solvents. Fills gaps to 0.25”
resistant to 400°F (204°C) continuous service, 500°F
(260°C) intermittent. Oil resistant. UL classified for US.
siZe
tYPe
temP ranGe
COlOr
Part nO
PriCe
70 ml
Tube
-75 to 500°F
Blue
LCT-58730
14.77
siZe
tYPe
temP ranGe
COlOr
Part nO
PriCe
80 ml
Tube
-75 to 400°F
Clear
LCT-51387
11.78
300 ml
Cartridge
-75 to 400
Clear
LCT-51388
26.44
598 ™ black rtV silicone
superflex ® blue rtV silicone
Gasket maker
adhesive sealant
high Performance
Cures to a tough, flexible rubber. Makes reliable
Retains high flexibility and oil resistance for longer
“formed-in-place” gaskets that resist shrinking, cracking,
gasket life. Temperature range -75 to +625°F
and migrating. Coats pre-cut gaskets to increase
(-59 to 329°C) intermittent. Low odor, non-corrosive,
reliability. Temperature range -65°F to 500°F (-54°C to
low volatility. Resistant to most chemicals and solvents.
260°C) intermittent. Low volatility. Fills gaps to .25”.
Fills gaps to .25”. Approved by the American Bureau
of Shipping and CFIA approved. Excellent oil resistance.
Non-corrosive.
siZe
tYPe
temP ranGe
COlOr Part nO
PriCe
80 ml
Tube
-65° to 500°F
Blue
LCT-30560
6.52
300 ml
Cartridge
-65° to 500°F
Blue
LCT-30533
20.88
siZe
tYPe
temP ranGe
COlOr
Part nO
PriCe
12 oz
Tube
-65° to 500°F
Blue
LCT-30518
25.83
70 ml
Tube
-75 to 625°F
Black
LCT-59830
14.77
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-57
G asketinG & s ealinG
5920 ™ Copper rtV silicone Gasket
instant Gasket
maker high temp
Gaskets in One minute
high Performance
Makes high performance, leakproof gaskets in
Premium silicone that can withstand operating
one minute. Equipment can be returned to service
environments to 700°F (371°C) intermittent. Superior
immediately. Blowout resistant. Outperforms precut
oil resistance. Low odor, non-corrosive, low volatility,
gaskets. Increased oil resistance. Non-corrosive.
non-conductive. Resistant to most chemicals and
Agency approvals include GM 998-5990 Type I, Ford
solvents. Fills gaps to .25".
WSE-M4G323
siZe
tYPe
temP ranGe
COlOr
Part nO
PriCe
siZe
tYPe
temP ranGe
COlOr
Part nO
PriCe
70 ml
Tube
-65 to 700°F
Copper
LCT-30542
8.81
5 oz
Cartridge
-75 to 500°F
Black
LCT-30509
24.42
300 ml
Cartridge
-65 to 700
Copper
LCT-82046
26.62
hi-tack
5188 ™ ultra-tough
Gasket sealant
For large Flanges & high stress applications
suitable to 500ºF
Ultra-tough provides a tough, resilient solvent and
Red-colored, liquid sealant that holds gaskets
tempertature-resistant seals that flexes with flange
in place during assembly. Seals and bonds
movements caused by vibration, pressurization, or
rubber, cork, paper, felt, metal, and asbestos
thermal changes. Provides resistance to low pressures
gaskets. Sets quickly to a very tacky film.
immediately after assembly. Sold per pc.
Suitable to 500°F (260°C). Contains no
ozone-depleting compounds.
siZe
tYPe
Part nO
PriCe
Increased oil resistance. Non-corrosive.
50 ml
Cartridge
LCT-1253203
21.85
300 ml
Cartridge
LCT-1241991
93.51
siZe
tYPe
temP ranGe
COlOr Part nO
PriCe
9 oz
Aerosol
-65° to 500°F
Red
LCT-30526
11.47
1 pint
Brush Can
-65° to 500°F
Red
LCT-1540591
18.57
5203 Flange sealant
Loctite ® 5203 ™ seals close fitting joints between rigid metal
faces and flanges. Provides resistance to low pressures
immediately after assembly of flanges. The product cures
aviation
rapidly when confined in the absence of air between close
Gasket sealant
fitting metal surfaces. Fully cured product can easily be
brushable Dressing
removed from flange faces, particularly on aluminum.
Typically used as a form-in-place gasket on rigid flanged
Reliable, liquid gasket sealant, dressing, and
connections, e.g. gearbox and engine casings, etc. The
coating. Thin, brushable dressing or sealer for
thixotropic nature of Loctite 5203 reduces the migration of liquid
close-fitting parts. Use to 400°F. Resistant to
product after application to the substrate. Sold per piece.
gasoline and other solvents. Oil resistant.
Non-corrosive. CFIA approved.
siZe
Part nO
PriCe
300 ml cartridge
LCT-1317148
93.51
siZe
tYPe
temP ranGe
COlOr
Part nO
PriCe
1 pt
Brush Can
-65° to 400°F
Red Brown
LCT-1522029 13.63
98128 Cartridge
Dispense tip
insulating &
2-1/2" long; 1/4 male thread for Semco, plastic tip with stepped end
sealing Wrap
(cut to desired tip opening). 10 tips per pack. Sold per pack.
Non-sticky, self fusing, multi-purpose wrap. It
can withstand extreme conditions: -65 to 500°F,
siZe
Part nO
PriCe
tensile strength up to 700 psi and dielectric
2-1/2"
LCT-98128
32.20
strength up to 400 vpm. The wrap is uv,
saltwater, fuel and acid resistant. Sold per
piece.
We have what you
want...when you want it.
siZe
tYPe
COlOr
Part nO
PriCe
1" x 10'
Wrap
Red
LCT-1212164
12.13
2" x 36'
Wrap
Red
LCT-1496756
52.47
H-58
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
G asketinG & s ealinG
Powerfoam ™
triggerFoam Pro ™
no special Gun required
Window & Door
Powerfoam ™ is a normal expansion polyurethane foam
TriggerFoam Pro ™ Window and Door is a professional
sealant which is supplied with a handy straw applicator.
grade, low pressure, gun applied, polyurethane foam sealant.
No special dispensing gun is necessary for use. Adheres to
This foam does not distort window and door frame when
wood, metal, masonry and concrete. Seal gaps and joints,
expanded. Adheres to wood, metal, masonry and concrete.
insulates, stops air infiltration and saves time and money.
Seals gaps and joints, insulates, stops air infilitration and
Ideal for use around pipes, wire and ductwork. Drying time is 5 hours.
saves time and money. Ideal for use around pipes, wires and
Recommended curing time is 24 hours. Packed 12 cans per cse. Sold
ductwork. Recommended curing time is 24 hours prior to scraping
per can.
or painting Packed 12 cans per case. Sold per can.
siZe
Part nO
PriCe
siZe
Part nO
PriCe
12 oz
RAW-08130N
16.40
29 oz
RAW-08134P
30.90
29 oz
RAW-08132N
36.80
triggerFoam Pro ™
triggerFoam Pro ™
all season
standard Formula
TriggerFoam Pro ™ All Season formula is a professional
TriggerFoam Pro ™ Standard formula is a professional grade,
grade, gun applied, polyurethane foam sealant with an
gun applied, normal expansion, polyurethane foam sealant.
extended application temperature range, which allows use at
Adheres to wood, metal, masonry and concrete. Seals gaps
temperature as low as 23°F (-5°C). May be used at 14°F
and joints, insulates, stops air infiltration and saves time and
(-10°C) if can is stored at 77°F (25°C) for 8 hours before use.
money. Recommended curing time is 24 hours prior to
Adheres to wood, metal, masonry and concrete. Seals gaps and
scraping or painting. Packed 12 cans per case. Sold per can.
joints, insulates, stops air infiltration, and saves time and money. Ideal
for use around pipes, wires and ductwork. Recommended curing time
siZe
Part nO
PriCe
is 24 hours prior to scraping or painting. Packed 12 cans per case.
29 oz
RAW-08136N
43.30
Sold per can.
siZe
Part nO
PriCe
29 oz
RAW-08135P
25.80
triggerFoam Pro ™
Fireblock
TriggerFoam Pro ™ FireBlock is a professional grade, gun
applied, polyurethane foam sealant designed to effectively
triggerFoam Pro ™
block the spread of smoke and flame in Type V residential
Cleaner
construction. It is more cost effective than fiberglass and
TriggerFoam Pro ™ Cleaner removes uncured polyurethane
caulks used for this purpose. NOT A FIRESTOP. Adheres to
foam sealant from inside and outside of application tools.
wood, metal, masonry and concrete. Seals gaps and joints, insulates,
May also be used to remove uncured foam from hands,
stops air infiltration and saves time and money. Ideal for use around
clothing and unintended surfaces. Always test on an
pipes, wire and ductwork. Recommended curing time is 24 hours prior
inconspicuous area to be sure that cleaner will not damage
to scraping or painting Packed 12 cans per case. Sold per can.
the finish. Contents are extremely flammable. Do not smoke while
using. Keep away from flames, pilot lights, hot surfaces such as light
siZe
Part nO
PriCe
bulbs and objects that may create sparks, such as electric motors,
29 oz
RAW-08133P
27.00
fans, etc. Packed 6 cans per case. Sold per can.
siZe
Part nO
PriCe
17 oz
RAW-08147
21.30
triggerFoam Pro ™
Please nOte:
metal Gun and brass tips
Chemicals, aerosols, oils,
TriggerFoam Pro ™ metal gun and brass
grease etc. cannot be
replacement gun tips. Sold per piece.
shipped by air. All shipments
of these products must deliver
DesC
Part nO
PriCe
by Ground Service Only.
Metal Gun
RAW-08140
195.60
Replacement Tip
RAW-08141
18.00
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-59
F loor C oating & r epairs
5499 System
Half-Barrel
Concrete
Caulking Gun
Patching
1/10 gallon, half-barrel with
Compound
smooth rod and quick release
A two-component epoxy
mechanism. Holds most standard cartridges. Use for light to medium
based compound for
applications of glazing, sealants, caulks and other cartridge products.
patching concrete floors.
For repairs to cracks and
Part No
PrICE
damaged areas. No priming required and results in an extremely
RED-3985
2.59
hard surface that is up to three times stronger than concrete.
Flat, gray finish.
Sold per kit (2 -1 gallon containers).
SIZE
Part No
PrICE
Uni-rail
2 gal
RST-5499-499
161.83
Caulking Gun
1/10 gallon, heavy-duty uni-rail
construction with hex piston rod
and quick release lever. Fits all standard cartridges.
Use for light to medium applications.
FloorSavers ™
Part No
PrICE
Concrete Crack repair
RED-3986
4.99
Self-leveling urethane compound designed to
repair cracks and gaps in concrete - quickly and
easily. Gray in color and cartridge fits in a standard
caulking gun. Coverage is 20.3 linear feet at
1/4 wide x 1/4" deep gap. Sold per cartridge.
Floor Patch ™
All-purpose,
easy-to-mix and apply
concrete patching
compound. With a
compressive strength
of 8000 psi Floor
Patch™ provides
three times the typical
SIZE
Part No
PrICE
strength of concrete.
250 ml
DEV-13400
27.45
SIZE
Part No
PrICE
10 lb
DEV-13100
88.80
40 lb
DEV-13120
242.05
Fixmaster ®
Crack Filler SL
A two component, rapid curing 1:1 ratio,
polyurethane joint filler designed for heavy duty
traffic and freezer applications. It is a self-leveling,
100% solid, low viscosity, flexible system that
Floor Patch ™ FC
provides 10-15% movement of installed joint
(Fast-Cure)
width. Can be applied at temperatures between
With this fast-curing
-40 - 120°F. 12 cartridges per case. Sold per case.
version of Floor Patch™,
repaired areas can be
back in service in
3 hours.
SIZE
Part No
PrICE
SIZE
Part No
PrICE
8.6 fl oz cartridge
LCT-1291113
39.13
10 lb
DEV-13110
99.67
H-60
order by phone: (513) 604-8338
Fax: (513) 893-4877
order online: www.jpgsupplies.com
F loor C oating & r epairs
Floor Patch ™ resurfacer
Ultra Quartz ™
A three-part filled epoxy system for concrete
Heavy-duty, trowelable premium floor
floors where aggregate is exposed. This
patching system with excellent chemical
self-leveling product mixes easily, is ideal for
resistance. System includes a primer for
repairing damaged concrete and rebuilding to
superior adhesion to cured concrete or
depths of 1/4 to 1".
other surfaces.
SIZE
Part No
PrICE
SIZE
Part No
PrICE
35 lb
DEV-13550
314.44
41 lb
DEV-13130
237.28
Fixmaster ®
Deep Pour Grout ™
magna-Grout ™
Filled epoxy grout for pouring
machinery mounting pads to 6” deep
A two-component, rapid-setting
and rebuilding worn concrete. Easy to
concrete repair and grouting
mix and self-leveling.
system with the same properties
as Magna-Crete® containing
smaller aggregate (less than
1/4") so that the mixed material
can be poured thinner for
resurfacing applications and
feather edging. Sold per piece.
SIZE
Part No
PrICE
50 lb
DEV-13800
243.36
SIZE
Part No
PrICE
1 gal kit
LCT-1477097
86.46
2475 lb tote
LCT-1476709
4975.88
Floor Grip ™
Heavy-duty epoxy compound
Fixmaster ®
with silicone carbide granules
magna-Crete ®
produces an exceptional
non-skid surface on walkways,
Floor repair + resurface
ramps, loading docks and
Grout Kit
stairs. Excellent adhesion to
A two-component, rapid setting
concrete, brick, steel, aluminum
concrete repair and grouting
and wet surfaces. Can be
system. Chemically resistant to
applied at temperatures as
most common liquids and chemicals. Bonds to concrete, wood,
low as 40° F
glass, steel, and other construction materials. CFIA approved.
SIZE
tYPE
CoLor
Part No
PrICE
SIZE
Part No
PrICE
1 gal
Kit
Gray
LCT-95551
86.64
2 gal
DEV-13090
357.26
PLEaSE NotE:
Chemicals, aerosols, oils,
grease etc. cannot be
shipped by air. All shipments
of these products must deliver
by Ground Service Only.
order by phone: (513) 604-8338
Fax: (513) 893-4877
order online: www.jpgsupplies.com
H-61
R ebuild & R ePaiR
Fixmaster ®
Belt Dressing
4 Minute Epoxy
Extends belt life. Penetrates the cord fibers of “V” belts
Sets in 4-6 Minutes
to restore pliability and flexibility. Prevents belt slippage
Translucent, gel-like adhesive. Sets up in 4-6
due to heat, cold, dampness, and dust. Eliminates
minutes. Temperature resistant up to 160°F. Ideal for
squeaking and glazing. NSF H1 registered for use in
emergency repairs or where reduced fixturing time is
meat and poultry plants.
desirable. Cartridge requires manual cartridge
dispenser gun (item number 983531).
SIZE
TYPE
PArT NO
PrICE
10 oz
Aerosol
LPS-02216
12.68
SIZE
TEMP rANGE
COLOr
PArT NO
PrICE
50 ml
160°F
Translucent (Cured)
LCT-97434
16.87
Belt Dressing
Conditioner
Extends belt life. Penetrates the cord fibers of “V”
belts to restore pliability and flexibility. Prevents belt
Fixmaster ®
slippage due to heat, cold, dampness, and dust.
Fast Set Steel Epoxy
Eliminates squeaking and glazing.
Stainless Steel Filled
Steel filled. Reaches functional cure in 10 minutes.
Temperature resistant up to 200°F. Recommended for
SIZE
TYPE
TEMP rANGE
PArT NO
PrICE
repairing pipes and other equipment that must be
12 oz
Aerosol
Up to 200°F, 93°C
LCT-30527
6.04
back in service in minutes. Cartridge requires manual
cartridge dispenser gun. Approved by the CFIA.
SIZE
TEMP rANGE
COLOr
PArT NO
PrICE
50 ml
200°F
Gray (Cured)
LCT-96604
18.23
Form-A-Thread ® Stripped
Thread repair Kit
Stripped Thread repair Kit
Permanently repairs stripped threads and
fasteners in five minutes (up to SAE Grade 5
English and 8.8 metric). Allows up to 1,538
Fixmaster ®
in/lbs torque on 1” bolt, and 300°F. Resists
Metal Magic Steel ™
most shop fluids. CFIA approved.
Epoxy
Stick Form
SIZE
TYPE
TEMP rANGE
PArT NO
PrICE
4.8 ml
Kit
300°F Max.
LCT-28654
21.95
Steel epoxy in stick form. Cut off a section, knead, and apply to
leaking pipes or damaged equipment. Cures in 10 minutes.
SIZE
COLOr
PArT NO
PrICE
4 oz
Gray
LCT-98853
17.62
Fixmaster ® Poxy Pak
Fast Cure Epoxy
This fast cure, high strength, thick liquid reaches
handling strength in 4-6 minutes. Bonds virtually any
material to repair, fill, seal holes, cracks, and worn
Fixmaster ®
surfaces. Approved by the American Bureau of
Shipping and CFIA. Syringe type.
High Performance Epoxy
Fiberglass reinforced
Fiberglass reinforcement gives this adhesive
SIZE
TEMP rANGE
COLOr
PArT NO
PrICE
outstanding tensile, shear strength, and shock
1 oz
300°F
Clear (Cured)
LCT-1324007
8.59
resistance up to 180°F. Recommended for forming
permanent, water-resistant bonds in production and
maintenance applications. Cartridge requires manual
PLEASE NOTE:
cartridge dispenser gun. Approved by CFIA.
Chemicals, aerosols, oils,
grease etc. cannot be
SIZE
TYPE
TEMP rANGE COLOr
PArT NO
PrICE
shipped by air. All shipments
50 ml
Cartridge
180°F
Tan (Cured)
LCT-99394
19.77
of these products must deliver
1 oz
Syringe
180°F
Tan (Cured)
LCT-99393
11.55
by Ground Service Only.
H-62
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
R ebuild & R ePaiR
Fixmaster ®
Plastic Welder ™
underwater repair Epoxy
Methacrylate Adhesive
Fully Cured in One Hour
Toughened structural adhesive produces superior strength load-bearing
This putty-like material is ideal for plumbing, irrigation, and marine
bonds to engineered plastics, unprepared metals, ceramics, wood, and
applications because it is unaffected by chlorinated or salt water.
dissimilar substrates. Requires minimal surface preparation. Resistant
It is hand kneadable and fully cures in 1 hour. Approved by CFIA.
to weathering, humidity, and wide variations in temperature.
SIZE
TYPE
PArT NO
PrICE
SIZE
TEMP rANGE
COLOr
PArT NO
PrICE
47 ml
Cartridge
DEV-14320
13.72
4 oz
300°F
White (Cured)
LCT-82093
15.42
Fixmaster ®
Fixmaster ®
Fast Set Steel Putty
Steel filled, non-sagging epoxy for
Fast Cure Epoxy Mixer Cups
filling and repairing damaged metal
Pre-Measured Cups
parts quickly. Functional cure in about 10 minutes.
Premeasured epoxy mixer cups. Bonds in
Approved by the American Bureau of Shipping and CFIA.
5-15 minutes. Excellent chemical resistance.
Fills porosities and can be used to build up
SIZE
TYPE
COLOr
PArT NO
PrICE
worn parts. Ideal for bonding glass, hard
1 lb
Kit
Gray
LCT-39917
61.74
plastics, rubber, and metal.
Approved by CFIA.
SIZE
TEMP rANGE
COLOr
PArT NO
PrICE
Fixmaster ®
10/0.12 fl. oz cups
180°F
Gray (Cured)
LCT-21425
37.50
10/1 oz cups
180°F
Gray (Cured)
LCT-21426
101.76
Steel Putty Epoxy
Non-Sagging
Steel filled, non-sagging, two-part
epoxy that cures to a metal-like finish for rebuilding or repairing
metal parts. Approved by the American Bureau of Shipping.
Fixmaster ®
SIZE
TYPE
COLOr
PArT NO
PrICE
General Purpose Epoxy
1 lb
Kit
Gray
LCT-99913
54.21
4 lb
Kit
Gray
LCT-99914
170.16
Mixer Cups
One Hour Working Time
Premeasured epoxy mixer cups. One hour
working time. Fills porosities and can be used
to build up worn parts. Ideal for bonding glass,
Fixmaster ®
hard plastics, rubber, and metal.
Stainless Steel Putty
Approved by CFIA.
Stainless Steel Filled
Stainless steel filled. Forms a
SIZE
TEMP rANGE COLOr
PArT NO
PrICE
non-rusting, very hard, durable finish on damaged stainless steel
10/0.12 fl. oz cups
180°F
Translucent (Cured)
LCT-21427
38.37
surfaces. Approved by the American Bureau of Shipping and CFIA.
SIZE
TYPE
COLOr
PArT NO
PrICE
1 lb
Kit
Gray
LCT-97443
82.95
Magic Bond ™
Epoxy Putty
Fixmaster ®
Emergency repair
Superior Metal
Two-color stick ensures thorough
mixing. Seals leaks and repairs
Ferro-Silicon filled
gouges in steel, aluminum, wood, fiberglass, concrete, and ceramics.
Ideal for renewing or protecting surfaces subject to corrosion,
Can be painted, sanded, machined, tapped, or drilled. For plumbing
abrasion, and harsh environments. Ferro-silicon-filled epoxy has
repairs and marine use. Cures rock-hard in 30-40 minutes, seals
outstanding compressive strength, chemical resistance. Non-rusting.
permanently. Cures even under water.
Approved by CFIA.
SIZE
TYPE
PArT NO
PrICE
SIZE
TYPE
COLOr
PArT NO
PrICE
4 oz
Stick
DEV-11600
14.83
1 lb
Kit
Dark Gray
LCT-97473
111.21
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-63
R ebuild & R ePaiR
Fixmaster ®
Wear Guard ™ High Load
Steel Liquid Epoxy Kit
High-alumina, ceramic bead-filled
Pourable and Self Leveling
epoxy system for outstanding
abrasion resistance to processing
Steel filled. Pourable and self-leveling.
equipment. Handles particulate
Epoxy is recommended for casting into hard-to-reach areas,
greater than 1/8. Operational
anchoring and leveling, and forming molds and fixtures.
temperature resistance to 300ºF.
Approved by the American Bureau of Shipping.
Exceptional resistance to a wide
range of acids, bases, saturated salt solutions, oils, and many
SIZE
TYPE
COLOr
PArT NO
PrICE
other chemicals. Trowels onto overhead or vertical surfaces without
1 lb
Kit
Gray
LCT-97483
59.83
sagging. Ideal for repairing scrubbers, ash handling systems, pipe
4 lb
Kit
Gray
LCT-97484
175.27
elbows, screens, and chutes. Sold per piece.
SIZE
TYPE
PArT NO
PrICE
9 lb
DEV-11491
185.64
30 lb
Kit
DEV-11490
382.05
Fixmaster ®
Aluminum Liquid
2 Part Epoxy System
Two-part, pourable epoxy system
Wear Guard ™ Fine Load
heavily reinforced with aluminum powder. For casting and repairing of
Micro-high-alumina, ceramic bead-filled,
aluminum parts, and for making molds and fixtures. Approved by the
high-density epoxy system for equipment
American Bureau of Shipping and CFIA.
protection. Handles particulate smaller
than 1/8”. Can be troweled to form
SIZE
TYPE
COLOr
PArT NO
PrICE
a smooth surface. Excellent for dust
1 lb
Kit
Aluminum
LCT-97453
84.07
particulate applications, slurry pumps,
scrubbers, screens, and screw
conveyors. Withstands operating
temperatures as high as 300°F. Outstanding
resistance to a wide range of chemicals. Sold per piece.
Fixmaster ®
SIZE
PArT NO
PrICE
30 lb
DEV-11470
669.22
Wear resistant Putty
Epoxy Kit
Metal-Filled
Ceramic fibers give this trowelable
putty excellent wear and abrasion resistant properties. Cures to
ComboWear FC
smooth, low friction surface. For surfaces exposed to wear, erosion,
(Fast Cure)
and cavitation. Non-rusting. Approved by the American Bureau of
High-tech, three-component (2 bead
Shipping and CFIA.
sizes plus silicon carbide) compound
for repairing process equipment
SIZE
TYPE
COLOr
PArT NO
PrICE
quickly and returning it to service in as little as 1-1/2 hours.
1 lb
Kit
Gray
LCT-98742
65.46
Excellent adhesion to metal, ceramic, and concrete surfaces.
3 lb
Kit
Gray
LCT-98743
177.54
Sets up in 1-1/2 hours with full cure in just 8 hours. Bonds to damp
surfaces. Ideal for cracks in large coal fuel lines.
SIZE
PArT NO
PrICE
9 lb
DEV-11450
220.24
Fixmaster ®
Wet Surface repair Putty
Metal-Filled
PLEASE NOTE:
Use this unique, trowelable epoxy to
Chemicals, aerosols, oils,
repair and rebuild wet, even underwater, surfaces. Bonds to wood,
grease etc. cannot be
concrete, steel, iron, aluminum, brass, and some plastics. Approved
by the American Bureau of Shipping.
shipped by air. All shipments
of these products must deliver
SIZE
TYPE
COLOr
PArT NO
PrICE
by Ground Service Only.
1 lb
Kit
Gray
LCT-96583
91.37
H-64
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
R ebuild & R ePaiR
Plastic Steel ®
Flexane ® 80 Putty
5 Minute ® Putty (SF)
rubber repair
General repair
Trowelable urethane for repairing
and lining process equipment
Fast-curing, steel-filled epoxy for emergency repairs at temperatures
exposed to wear, impact, abrasion,
as low as 40°F. Cures in less than 1 hour. Tough, steel-filled material
vibration, and expansion/contraction.
can be machined, drilled, tapped, or sanded.
Mixes easily and trowels on smoothly. Cures to a tough medium-hard
rubber (Shore A 87). Service temperatures to 180°F dry/120°F wet.
SIZE
PArT NO
PrICE
Flexane® primers are recommended for maximum adhesion to metal,
1 lb
DEV-10240
53.75
rubber, and concrete surfaces.
SIZE
PArT NO
PrICE
1 lb
DEV-15820
52.05
Plastic Steel ®
Putty (A)
Flexane ® 94 Liquid
General repair Putty
Cast rubber Parts / Fixtures
The original metal-filled epoxy putty. Used for hundreds of routine
Low-viscosity (6,000 cps) urethane
maintenance, production, and tooling applications. Bonds to most
cures to rigid rubber (Shore A 97).
metals, concrete, and some plastics. Cures at room temperature.
Harder material than Flexane® 80
Can be drilled, tapped, machined or painted. Excellent resistance to
Liquid. For applications requiring a
shorter demolding time (5 hours).
oil, gasoline, water, and chemicals. Ideal for patching and repairing
areas where welding or brazing would be undesirable or impossible.
SIZE
PArT NO
PrICE
Qualifies under DOD-C-24176B(SH), Type I.
1 lb
DEV-15250
52.05
SIZE
PArT NO
PrICE
1 lb
DEV-10110
41.29
Flexane ® Primer
rubber repair
Required for maximum adhesion of Flexane ®
Plastic Steel ®
products. FL-10 Primer for all metals.
FL-20 Primer for rubber, wood, fiberglass and concrete.
Liquid (B)
General repair
SIZE
TYPE
PArT NO
PrICE
When cast over models, steel-filled
4 oz
FL-10
DEV-15980
20.12
liquid epoxy provides accurate detail
4 oz
FL-20
DEV-15985
20.44
reproduction in the making of holding fixtures, light-gauge forming
dies, and molds. Hardens in about an hour. High compressive
strength. Machinable to close tolerances.
Low viscosity makes it an ideal leveling compound for machinery
and equipment. Qualifies under MMM-A-1754.
Titanium Putty
Precision repair
SIZE
PArT NO
PrICE
High-tech, titanium-reinforced epoxy
1 lb
DEV-10210
41.29
putty for making repairs that can be precision machined. Resistance to
chemicals and most acids, bases, solvents, and alkalis.Temperature
resistance to 350°F. High compressive strength (18,800 psi). Qualifies
under DOD-C-24176(SH), Type I & II.
SIZE
PArT NO
PrICE
1 lb
DEV-10760
101.40
Flexane ®
80 Liquid
Cast rubber Parts / Fixtures
Medium-viscosity (10,000 cps)
urethane fills voids completely,
Aluminum Putty (F)
faithfully reproduces mold detail, and cures to semi-rigid rubber. Mixes
General repair
and pours easily. Returns to its original shape after 650% elongation.
Aluminum-filled epoxy putty for
10-hour demolding time.
dependable nonrusting repairs to aluminum castings, machinery, and
equipment widely used in HVAC applications. Excellent resistance to
chlorofluorocarbons. Bonds to aluminum and many other metals. Fills
SIZE
PArT NO
PrICE
1 lb
DEV-15800
52.05
porosity in aluminum castings. Can be machined, drilled or tapped.
10 lb
DEV-15810
365.41
Qualifies under DOD-C-24176B(SH), Type II.
SIZE
PArT NO
PrICE
1 lb
DEV-10610
59.14
3 lb
DEV-10620
161.53
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-65
R ebuild & R ePaiR
Ceramic repair Putty
635 ™ retaining Compound
Precision repair
High Strength / Slow Cure
Trowelable, alumina-filled epoxy
A high viscosity, high strength retaining compound
compound for rebuilding, smoothing,
with slow cure speed to permit readjustment of
and protecting processing equipment exposed to corrosion, erosion,
loose fitted parts during assembly. Meets MIL-R-
cavitation, chemicals and acids. Excellent for filling voids and
46082B for existing designs and ASTM D-5363 for
rebuilding metal castings. Service temperatures to 350°F.
new designs.
Qualifies under DOD-C-24176B(SH) Type I & II.
SIZE
TYPE
TEMP rANGE
COLOr
PArT NO
PrICE
SIZE
PArT NO
PrICE
50 ml
Bottle
-65 to 300
Green
LCT-63531
52.17
3 lb
DEV-11700
192.28
609 ™ retaining Compound
648 ™ retaining Compound
General - Purpose
High Strength / rapid Cure
A low viscosity retaining compound that bonds rigid
A retaining compound recommended for
metal assemblies. Ideal for gap distances up to .005”
continuous working temperatures up to 300°F.
diametral. Fixtures in 10 minutes and provides a shear
Fills gaps up to .006” diametral clearance.
strength of 3,000 psi after 24 hours. Easily joins
Fixtures in 5 minutes.
dissimilar metals. Withstands temperatures to 300°F.
Meets MIL-R-46082B for existing designs.
ASTM-D-5363 for new designs, and CFIA.
SIZE
TYPE
TEMP rANGE
COLOr
PArT NO
PrICE
SIZE
TYPE
TEMP rANGE
COLOr
PArT NO
PrICE
0.5 ml
Bottle
-65 to 300
Green
LCT-60905
2.16
10 ml
Bottle
-65 to 300
Green
LCT-21443
19.20
10 ml
Bottle
-65 to 300
Green
LCT-60921
16.01
50 ml
Bottle
-65 to 300
Green
LCT-21444
54.49
50 ml
Bottle
-65 to 300
Green
LCT-60931
44.51
250 ml
Bottle
-65 to 300
Green
LCT-60941
154.62
680 ™ retaining Compound
620 ™ retaining Compound
High Strength / High Viscosity
High Temperature
A retaining compound for joining fitted cylindrical
A high temperature (450°F), high viscosity liquid
parts. Fixtures in 10 minutes and provides a shear
retaining compound. Provides a shear strength
strength of 4,000 psi on steel after 24 hours. Fills
of over 3,800 psi on steel. Locks and secures
diametral gap distances up to .015”. Features high
metal cylindrical assemblies up to .015” diametral
strength for slip fitted parts. Approved by American
clearance. Prevents metal fretting and corrosion.
Bureau of Shipping and NSF/ANSI-61 Certified.
Seals against leakage. Approved by the American
Bureau of Shipping and CFIA.
SIZE
TYPE
TEMP rANGE
COLOr
PArT NO
PrICE
10 ml
Bottle
-65 to 300
Green
LCT-68015
18.77
SIZE
TYPE
TEMP rANGE
COLOr
PArT NO
PrICE
50 ml
Bottle
-65 to 300
Green
LCT-68035
51.68
50 ml
Bottle
-65 to 450
Green
LCT-62040
51.68
No More Leaks ™
PLEASE NOTE:
Plastic Pipe Sealant
White paste seals plastic pipes and allows
Chemicals, aerosols, oils,
easy disassembly. Specially formulated
grease etc. cannot be
without the added lubricity of PTFE to avoid
shipped by air. All shipments
cracked fittings caused by over-tightened
plastic joints. NSF/ANSI-61 certified and CFIA
of these products must deliver
approved.
by Ground Service Only.
SIZE
TYPE
TEMP rANGE
PArT NO
PrICE
2 fl oz
Tube
-65 to 400°F
LCT-80725
5.76
7 fl oz
Tube
-65 to 400
LCT-80724
17.12
1 pint
Brush Can
-65 to 400
LCT-80726
28.15
H-66
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
R ebuild & R ePaiR
Pipe Joint Compound
resists Shop Fluids
Dap ® Latex Wood Dough
Economical, general purpose pipe thread
(rTu)
sealant that won’t shred like tape and allows
easy disassembly. Resists common shop
Latex Wood repair
fluids.
Quick, easy professional repairs of
cracks, dents, scratches, nailholes,
and chips in any type of wood. Holds
nails and screws without cracking
or crumbling.
SIZE
TYPE
TEMP rANGE
PArT NO
PrICE
SIZE
TYPE
COLOr
PArT NO
PrICE
1 pint
Brush Can
-65 to 400°F
LCT-1534294
11.19
1 pt
Tub
Natural
DAP-00527
7.73
Pipe repair Kit
Dap ® ‘33’ ®
Cures In 30 Minutes
Glazing (rTu)
Urethane impregnated fiberglass tape,
activated by water, for reliable, temporary
For glazing wood and metal sash. Outlasts
repairs of metal, plastic, and composite
ordinary putty. Smooth and ready mixed.
pipes. Includes Metal Magic Steel ™ epoxy
Excellent weather resistance.
stick and gloves. Cures in 30 minutes.
SIZE
TYPE
COLOr
PArT NO
PrICE
1/2 pint
Can
White
DAP-12120
4.28
SIZE
TEMP rANGE
PArT NO
PrICE
1 quart
Can
White
DAP-12122
12.23
2” x 6’ tape
250°F Max.
LCT-96321
54.04
1 gal
Can
White
DAP-12019
40.43
3-1/2 gal
Pail
White
DAP-12124
119.28
One of the most important tools you can have!
JPG Master Catalog
If you or an associate need another catalog,
please call for yours today
(513) 604-8338
Headquarters: 3189 Princeton Rd Drive cincinnati, OH 45011
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-67
A dhesives & e POxies
5 Minute ® Epoxy
Scotch-Weld ™
Epoxy Adhesive
Urethane Adhesive
Rapid-curing, general-purpose
adhesive/encapsulant. Bonds rigid,
DP-608
durable substrates such as metal, glass,
Patented rapid Setting
ceramics, concrete, and wood. Fixture
Patented rapid setting two-component polyurethane
in 5 minutes or less.
adhesive.
SIZE
Color
PArT No
PrICE
SIZE
TYPE
PArT No
PrICE
50 ml
Black
MMM-96418
13.06
25 ml
Tube
DEV-14250
5.44
50 ml
Cartridge
DEV-14270
12.06
2.5 oz
Tube
DEV-14210
9.40
15 oz
Dual Bottles
DEV-14200
45.58
Scotch-Weld ™
Urethane Adhesive
Depend ® 330 ™
DP-620NS
No-Mix Adhesive
long Working Time
Depend ® no-mix adhesive is a no-mix high
Long working time two-component
viscosity adhesive for a wide range of materials
polyurethane formulated as 1:1 ratio liquids.
including metal, wood, ferrite, ceramic, and
plastic. CFIA approved.
SIZE
Color
PArT No
PrICE
SIZE
TYPE
TEMP rANGE
Color
PArT No
PrICE
50 ml
Black
MMM-96416
13.06
25 ml
Kit
-65 to 250°F
Amber
LCT-20251
38.21
12 oz
Black
MMM-56685
57.40
250 ml
Kit
-65 to 250
Amber
LCT-20252
100.07
Power Grab ®
Scotch-Weld ™
Loctite ® Power Grab ® Industrial Construction
Urethane Adhesive
Adhesive is a single-component, off-white, heavy duty,
DP-604NS
high strength, construction grade adhesive for interior
and exterior repairs or building projects. Fast set time.
Dual Cartridge
Wood bonding. Water resistant. Shock & impact
Patented rapid setting two-component
resistant. Apply to vertical surfaces. Sandable &
polyurethane.It is packaged as 1:1 Ratio
paintable finish. Greenguard ® certified.
liquids in a dual cartridge. With the squeeze of
Sold per piece.
the trigger, the components are automatically
mixed and easily dispensed as a
bubble-free non-sag paste.
SIZE
PArT No
PrICE
300 ml cartridge
LCT-1210760
6.80
825 ml cartridge
LCT-1210759
14.45
SIZE
Color
PArT No
PrICE
50 ml
Black
MMM-96412
13.06
12 oz
Black
MMM-56598
57.40
H-68
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
A dhesives & e POxies
Speedbonder ™ 324 ™
404 ™ Quick Set ™
Structural Adhesive
Wicking Grade Instant Adhesive
Quick Set ™ Instant Adhesive is a general purpose
High Impact
instant adhesive for general maintenance and repair.
Ideal for large gap applications. Offers the strength
Excellent for rubber o-ring bonding. Commercial item
of an epoxy and the speed of an instant adhesive.
std. A-A-3097. Fixtures in 30 seconds.
Solvent resistant. Cures in minutes. Specially
formulated for toughness and impact strength.
Fixtures in 5 minutes.
SIZE
TYPE
TEMP rANGE
Color
PArT No
PrICE
SIZE
TYPE
TEMP rANGE
Color
PArT No
PrICE
50 ml
Bottle
-65 to 275°F
Amber
LCT-32430
22.07
1/3 oz
Bottle
-65 to 180°F
Clear
LCT-46551
26.81
4 oz
Bottle
-65 to 180
Clear
LCT-46548
174.93
Speedbonder ™ 325 ™
Structural Adhesive
Prism ® 410 ™
High Temperature
Instant Adhesive
Solvent resistant, activator-cured in minutes.
Gap Filling - black
Forms flexible bonds on gaps up to .40”.
Black toughened instant adhesive has enhanced
Designed for severe environments and
resistance to peel and shock loads. Fixtures in 90
temperatures to 350°F. Fixtures in 5 minutes.
seconds. CFIA approved.
SIZE
TYPE
TEMP rANGE
Color
PArT No
PrICE
50 ml
Bottle
-65 to 350°F
Amber
LCT-32530
21.96
SIZE
TYPE
TEMP rANGE
Color
PArT No
PrICE
20 gm
Bottle
-65 to 225°F
Black
LCT-41045
26.87
380 ™ black Max
Toughened Instant Adhesive
Prism ® 411 ™
Black Max® toughened instant adhesive is the
original elastomer-modified instant adhesive.
Instant Adhesive
Bonds metal, rubber, and plastic. Excellent peel,
Gap Filling - Clear
impact, and shear strength. Fixtures in 90
Clear toughened instant adhesive has excellent
seconds. CFIA approved.
impact and peel strength in gap filling applications to
.008”. Fixtures in 30 seconds. CFIA approved.
SIZE
TYPE
TEMP rANGE
Color
PArT No
PrICE
1 oz
Bottle
-65 to 225°F
Black
LCT-38050
33.51
1 lb
Bottle
-65 to 225
Black
LCT-38061
273.77
SIZE
TYPE
TEMP rANGE
Color
PArT No
PrICE
3 gm
Tube
-65 to 210°F
Clear
LCT-41104
6.06
20 gm
Bottle
-65 to 210
Clear
LCT-41145
26.70
1 lb
Bottle
-65 to 210
Clear
LCT-41161
273.77
Prism ® 401 ™
Instant Adhesive
General Purpose
PRISM ® 401 ™ is a general purpose surface
PlEASE NoTE:
insensitive instant adhesive for bonding
Chemicals, aerosols, oils,
difficult-to-bond surfaces. Fixtures in 15 seconds.
CFIA approved.
grease etc. cannot be
shipped by air. All shipments
of these products must deliver
SIZE
TYPE
TEMP rANGE
Color
PArT No
PrICE
by Ground Service Only.
3 gm
Tube
-65 to 180°F
Clear
LCT-40104
6.01
20 gm
Bottle
-65 to 180
Clear
LCT-40140
24.27
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-69
A dhesives & e POxies
Super bonder ® 414 ™
Instant Adhesive
Plastic bonder
Gorilla Glue
High strength adhesive ideal for bonding plastic and
Adhesives
vinyl parts with gaps to .006”. Fixtures in 20 seconds.
Gorilla Glue is the strongest and most
Commercial item std. A-A-3097 and CFIA approved.
versatile glue on the market today. It
takes just an ounce of Gorilla Glue to
cover one square foot. That’s 3 to 4
times the coverage of other glues.
Some of its salient features are:
SIZE
TYPE
TEMP rANGE
Color
PArT No
PrICE
Indoor and outdoor use. Bonds
1 oz
Bottle
-65 to 180°F
Clear
LCT-41450
26.06
wood, stone, metal, ceramics,
plastics & more. 100% waterproof.
Incredibly strong & versatile. Stainable and paintable. Easily
sanded. More coverage. Long open working time. Dries neutral color.
Prism ® 454 ™
Clear Instant Adhesive Gel
SIZE
TYPE
PArT No
PrICE
A general purpose, no-run clear gel. Can be applied to
4 oz
Bottle
LUT-50004
6.99
vertical surfaces. Excellent for almost all surfaces. Ideal
8 oz
Bottle
LUT-50008
12.50
for porous substrates, and rough surfaces. Fixtures in 15
seconds. Approved by the American Bureau of Shipping
and CFIA.
Scotch-Grip ™ Adhesive
SIZE
TYPE
TEMP rANGE
Color
PArT No
PrICE
1300
3 gm
Tube
-65 to 180°F
Clear
LCT-45404
6.01
10 gm
Syringe
-65 to 180
Clear
LCT-21925
22.47
rubber And Gasket 1300
20 gm
Tube
-65 to 180
Clear
LCT-45440
25.99
A yellow, premium quality, versatile,
30 gm
Syringe
-65 to 180
Clear
LCT-1337712
43.77
brushable, heat resistant adhesive
that develops strength rapidly. Has excellent adhesion to metal, bake
enamel, wood, most plastics, and neoprene, reclaim, SBR, and butyl
rubber.
Super bonder ® 495 ™
SIZE
Color
PArT No
PrICE
Instant Adhesive
5 oz
Yellow
MMM-19868
15.46
General Purpose
A clear general purpose instant adhesive designed
to bond rubber, metal, and plastic parts with gaps
to .004”. Fixtures in 30 seconds. Commercial item
std. A-A-3097.
Super 77
Multi-Purpose Adhesive
SIZE
TYPE
TEMP rANGE
Color
PArT No
PrICE
High coverage, fast, aggressive tack, and a
3 gm
Tube
-65 to 180°F
Clear
LCT-49504
4.33
long-bonding range. Versatile-securely bonds
1 oz
Bottle
-65 to 180
Clear
LCT-49550
23.91
most lightweight materials, plus it has low
soak-in for long-lasting bonds. Excellent for jobs
in display and furniture-it bonds thin decorative
film, foils and fabrics. Bond gaskets in water
pumps, and attaches insulation to sheet metal.
Attaches wiring diagrams, very versatile adhesive.
PlEASE NoTE:
Chemicals, aerosols, oils,
grease etc. cannot be
SIZE
TYPE
PArT No
PrICE
shipped by air. All shipments
24 oz
Aerosol
MMM-21210
20.06
of these products must deliver
by Ground Service Only.
H-70
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
A dhesives & e POxies
High Strength 90
Dap ® Weldwood ®
Spray Adhesive
Contact Cement
Great initial strength that builds up to 230 psi shear
Nonflammable
strength. Excellent for many decorative laminates
because it dries in 1 to 2 minutes. Also a great
High solids polychloroprene, waterborne
adhesive for particle board, polyethylene and SBR
contact adhesive that meets the stringent
rubber. Bonds decorative laminates to tables,
requirements of the professional user. Dries
cabinets, and plastic sign lettering to wood. Adheres
in 30-40 minutes, allowing for extra bonding
polyethylene to wood, metal and more.
time. Water resistant when dry. Exceeds
industry performance requirements. Low odor. VOC compliant.
Easy water clean-up.
SIZE
Color
PArT No
PrICE
1 pt
White
DAP-25330
16.60
SIZE
TYPE
PArT No
PrICE
1 qt
White
DAP-25332
21.18
24 fl oz
Aerosol
MMM-30023
25.89
1 gal
White
DAP-25336
62.63
Adhesive remover
Citrus base
Dap ® Weldwood ®
Citrus base adhesive remover.
Contact Cement
Instant bond
Strong, instant bonds on contact.
Can be used on a variety of materials.
Excellent water resistance. Handy
applicator included in 1 oz. bottle.
SIZE
TYPE
PArT No
PrICE
SIZE
TYPE
Color
PArT No
PrICE
24 oz
Aerosol
MMM-49048
25.70
1 oz
Bottle
Tan
DAP-00102
4.23
3 oz
Bottle
Tan
DAP-00107
5.65
DAP ® Weldwood ®
original Contact Cement
Dap ® Weldwood ® Yellow Glue
Premium quality, brush grade,
Carpenter’s Yellow Wood Glue
neoprene-based contact cement that
Professional quality aliphatic resin wood and
meets the stringent requirements of the
multi-purpose glue providing a high strength bond.
professional user. High strength and initial
Sets fast, grips tight, sands easily when dry. Heat,
grab make it ideal for most projects.
water, and solvent resistant. Non-toxic. Low VOC.
Fast-drying formula dries in 15-20 minutes.
Offers high heat and water resistance when dry.
Exceeds industry performance requirements.
SIZE
Color
PArT No
PrICE
8 oz
Yellow
DAP-00490
4.53
SIZE
Color
PArT No
PrICE
1 pt
Yellow
DAP-00491
7.38
1 pt
Tan
DAP-00271
11.55
1 qt
Yellow
DAP-00492
10.73
1 qt
Tan
DAP-00272
14.05
1 gal
Yellow
DAP-00493
28.13
1 gal
Tan
DAP-00273
42.80
5 gal
Yellow
DAP-00494
123.68
Order by Phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-71
S pecialty
indoor/outdoor insecticide
Flying insect Killer - 15 oz aerosol
This water-based insecticide quickly knocks down
raid ® Flying insect Killer
and kills a variety of insects.
15 oz aerosol
For fast knockdown of flies, mosquitoes, and a variety of
insects. Kills flies in seconds.
siZe
Part no
PriCe
siZe
Part no
PriCe
15 oz
BET055-360223
6.43
15 oz
LAG500-DRK CB016605
12.50
Wasp and Hornet Killer Plus ™ insecticide
Kills on Contact
Deep Woods ®
Fast-acting, high strength insecticide that knocks down
6 oz aerosol
and kills wasps, hornets, yellow jackets, bees, fire ants,
25% DEET formula. Provides up to eight hours of
all crawling insects, scorpions, spiders and other stinging
long-lasting repellency against ticks, mosquitos, black
insects on contact. Plastic safe, and contains no chlorinated
flies, chiggers, fleas, gnats and no-see urns. Non-greasy
solvents. Plastic-safe - will not damage plastic connectors
and resists perspiration. No CFCs. EPA Registered.
and other insulating materials. CRC trigger provides a dense,
accurate spray that will reach over 20’ to drench harmful insects and
siZe
Part no
PriCe
their nests.The only wasp and hornet killer in the industry with CRC’s
6 oz
LAG500-DRK 94903
14.67
patented M.S.D.[L.]™, a current MSDS printed on the reverse side of
the product label. High dielectric strength of over 40,000 volts.
siZe
Part no
PriCe
20 oz
CRC-14010
7.85
off! ® FamilyCare spray
6 oz spray bottle
Wasp & Hornet insecticide
7% DEET formula. Repels mosquitoes, chiggers,
biting flies, ticks and gnats for up to two hours. Specially
This product quickly knocks down and kills wasps,
formulated with a lower level of active ingredient and aloe
hornets, and yellow jackets. Non-conductive 20’ spray.
vera to feel and smell better on your skin.
siZe
Part no
PriCe
6 oz
LAG500-DRK CB018357
14.08
siZe
Part no
PriCe
13.5 oz
BET055-03723
6.92
insect sting relief Pad
1-1/4 x 2-5/8" insect sting relief pad. For
temporary relief of pain and itching associ-
ated with minor burns, scrapes, insect bites and stings. Ingredients:
Wasp & Hornet Killer
benzocaine 6%, SD alcohol 60%. 10 pads per box. Sold per box.
14 oz aerosol
Part no
PriCe
Kills paper wasps, yellow jackets, mud daubers and
FIR062-A-301-10
2.29
bald-faced hornets in seconds. Sprays up to 22',
allowing you to kill from a distance. Dielectric breakdown
voltage of 32,500 volts. No CFCs. EPA Registered.
siZe
Part no
PriCe
14 oz
LAG500-DRK CB013536
13.00
battery terminal Protector
lead Free
Apply to battery terminals to provide a soft, dry, lead-free
Please note:
protective coating that keeps moisture, salts and road
grime from corroding metal contacts. Enhances battery life
Chemicals, aerosols, oils,
and power by preventing corrosion-related leakage. Soft,
grease etc. cannot be
flexible film completely encapsulates exposed surfaces
shipped by air. All shipments
and will not become brittle, crack or peel. Red color provides easy
of these products must deliver
visual inspection of application. Dries quickly and protects instantly.
by Ground Service Only.
siZe
Part no
PriCe
12 oz
CRC-03175
11.34
H-72
Order by phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
S pecialty
ice-off ® Windshield spray De-icer
Melts ice, snow, and frost on contact. Harmless to car
stainless steel Cleaner & Polish
finish. Thaws frozen locks and is effective to sub-zero
21 oz aerosol Can
temperatures. Works on automobiles, headlights, locks
Cleans and polishes stainless steel, chrome, aluminum
and windows.
and laminated plastic surfaces. High-gloss formula wipes
clean with no streaks or buildup. Pleasant lime fragrance.
Sold per can.
siZe
Part no
PriCe
12 wt oz
CRC-05346
4.23
siZe
Part no
PriCe
21 oz
MMM-14002
12.89
Graffiti remover
17 oz aerosol
Duster ™ aerosol Dust removal system
This exclusive blend of penetrating solvents will quickly
Removes dirt and dust from any surface without damaging
restore surfaces marred by graffiti. Beautify surfaces by
sensitive components or surface finish. Penetrates into
removing unsightly scuff marks and graffiti. Safe on
cracks and crevices to remove contaminants that normal
many surfaces, this product may be used in washrooms,
hand dusting cannot reach. It delivers a powerful blast of
on sidewalks, Formica tops, mirrors and building walls.
product to remove embedded debris. The extension tube
This graffiti remover “works magic” on vandalism marred
can be used for more precise delivery. Non-flammable.
surfaces. The gel formulation clings to vertical surfaces for can better
No residue. Non-abrasive. Safe on all plastics.
penetration and removal of embedded graffiti. Left over residue easily
flushes away with water. Sold per can.
siZe
Part no
PriCe
12 oz
CRC-14085
21.08
siZe
Part no
PriCe
17 oz
BET055-01523
7.21
sCrub ® Graffiti & spray Paint
armor all original Protectant
Restores a rich, new look to your car’s dashboard,
remover towels
tires and trim. Protects vinyl, rubber and plastic from
Unique cleaning towel combines a high-quality
fading and cracking caused by UV, ozone, oxidation
graffiti remover formula with an absorbent, abrasive,
and extreme temperatures. Advanced water-based
non-scratching towel. Remover loosens and removes
formula has no alcohol or solvents.
graffiti and spray paint, allowing the towel to absorb
and hold residue without redeposting paint on surface.
siZe
tYPe
Part no
PriCe
Premoistened. Sold per canister.
28 fl oz
Trigger Spray
LAG500-ARM 10228
19.00
1 gal
Bulk Bottle
LAG500-ARM 10710
65.50
siZe
tYPe
Color
Part no
PriCe
10-1/2 x12-1/4"
Pail
Grey/White
DYK-90130
15.33
Freeze spray
aerosol Coolant system
twinkle ® stainless steel Cleaner
Aerosol coolant system that instantly freezes surfaces
to -60°F, dissipating heat and cooling equipment.
and Polish
Freeze Spray also assists in locating thermal intermittent
Water-based formula removes grease, dirt, fingerprints,
components, failures and shorts. Safe to use on sensitive
smudges and water marks from stainless steel, brass,
components and all surface finishes. Freeze Spray comes
aluminum and chrome. Leaves no residue or greasy film.
with a 4" extension tube for precise application of the product.
Protects against resoiling. Contains no CFCs. NS FC1
Non-flammable, safe on plastics. Dries instantly, leaves no residue.
registered. Light lemon fragrance. 17-oz aerosol can.
Non-abrasive. Contains no Class I or Class II Ozone Depleting
12 cans per case. Sold per case.
Chemicals.
siZe
Part no
PriCe
siZe
Part no
PriCe
17 oz
LAG500-DRK 91224
18.17
12 oz
CRC-14086
21.20
Order by phone: (513) 604-8338
Fax: (513) 893-4877
Order Online: www.jpgsupplies.com
H-73